×
Legal Info

When you visit any website, it may store or retrieve information on your browser, mostly in the form of 'cookies'. This information, which might be about you, your preferences, or your internet device (computer, tablet or mobile), is mostly used to make the site work as you expect it to. You can find out more about how we use cookies on this site, and prevent the setting of non-essential cookies, by clicking on the different category headings below. However, if you do this then it may impact your experience of the site and the services we are able to offer.

ODROID-H2 Case Type 4
ODROID-H2 Case Type 4
ODROID-H2 Case Type 4
ODROID-H2 Case Type 4

ODROID-H2 Case Type 4

US$17.95
Tax excluded
In Stock, Shipping Now

 

Secure Transaction

 

Shipping Directly from Canada

 

Customer-Friendly Return Policy

This “Case Type 4” is designed for the user who needs high bandwidth network with mid-range storages. Basically, this is the fanless design and the heated air from a processor or the storages – especially a hard disk drive with a spinning motor – can be blow out through the two 92mm holes  on top of the ODROID-H2 and the disk drives. But you also can install a 92x92mm standard PC cooling fan (optional) at a hole out of two on top of the ODROID-H2 if you supply the decent power for the fan.

  • Supported storages: Due to the physical limitation of the design, two different size of storages cannot be installed and below combination of the storage drives are supported.

On-board eMMC 5.1 module

On-board M.2 NVMe (NGFF-2280)

Up to 1 x 3.5” SATA HDD or SSD

Up to 2 x 2.5” SATA HDD or SSD (Max height : 15mm)

  • “SATA Data and Power Cable” must be purchased
  • The disk drive mounting screws (M3x6mm and #6-32x6mm) are included in the package.
  • The power and reset switches are accessible through the hole at the front
  • Optional power on/off switch (diameter 16mm) can be installed at the front
  • 209 (L) x 132 (W) x 106 (H) mm

 

Package Contents:

  • A. Rear-top panel
  • B. Front panel
  • C. Rear-back panel
  • D. Rear panel
  • E. Front space filler
  • F. Bottom panel
  • G. 2.5”/3.5” inner drive bracket
  • H. Left panel
  • I. Right panel
  • J. Top panel
  • K. 1 x 92mm stainless cooling fan grill for front-top
  • L. 1 x 92mm stainless cooling fan grill for rear-top
  • M. 6 x 40mm (F) PCB Supports
  • N. 3 x 40mm (M) PCB Supports
  • O. 4 x 15mm (M) PCB Supports
  • P. 6 x 6mm #6-32 Round Head Screws
  • Q. 8 x M5 Truss Head Bolts
  • R. 20 x 6mm Truss Head Bolts
  • S. 8 x M5 Nuts
  • T.  4 x Rubber Feet (Round / Clear)

 

Optional accessory:

Mechanical drawings:

 

 

ODH2CASE4A

Specific References

Only registered users can post a review. Log in or create an account .

No reviews at this time.

Only registered users can report abuse. Log in or create an account .
Only registered users can vote for a review.  Log in or create an account .