×
Legal Info

When you visit any website, it may store or retrieve information on your browser, mostly in the form of 'cookies'. This information, which might be about you, your preferences, or your internet device (computer, tablet or mobile), is mostly used to make the site work as you expect it to. You can find out more about how we use cookies on this site, and prevent the setting of non-essential cookies, by clicking on the different category headings below. However, if you do this then it may impact your experience of the site and the services we are able to offer.

ODROID-UPS2 for Odroid C1
ODROID-UPS2 for Odroid C1
ODROID-UPS2 for Odroid C1
ODROID-UPS2 for Odroid C1
ODROID-UPS2 for Odroid C1

ODROID-UPS2 for Odroid C1

US$59.95
Tax excluded

The UPS2 for C1 is designed specifically for the ODROID-C1. 
Uninterrupted Power Supply is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails. The on-battery runtime of most uninterruptible power sources is relatively short but sufficient to start a standby power source or properly shut down the ODROID-C1

In Stock

The UPS2 for C1 is designed specifically for the ODROID-C1. 
Uninterrupted Power Supply is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails. The on-battery runtime of most uninterruptible power sources is relatively short but sufficient to start a standby power source or properly shut down the ODROID-C1

It is equipped with a rechargeable 3,000mAh Lithium Polymer battery and a charger with a booster IC for 5V output.

When the AC power source fails, the UPS2 keeps supplying the power to the ODROID-C1 with the battery. There is a digital output pin to notice the battery low-level warning to the ODROID-C1 to trigger the shutdown process. And the AC power source available, UPS2 will supply the power to the ODROID-C1 again automatically. 

It will significantly reduce the risk of data loss by sudden power-down.

Full guide, schematics, PCB layout file and detail information is in our WiKi : 
http://odroid.com/dokuwiki/doku.php?id=en:odroid-ups2
 
PACKAGE INCLUDES :

- 3000mAh battery pack 
- DC Plug Cable soldered UPS2 board
- 3pin jumper wire (11mm)
- 4 x 20mm PCB spacers (Plastic)
- 4 x 11mm PCB spacers (Metal)
- 4 x 10mm PCB spacers (Plastic)
- 5V/2A Power Supply

Caution

The DCDC converters have an automatic shutdown/trip function which is activated when the load is very high even very short period.
The battery pack also has very sensitive protection circuit.
So the in-rush current can disconnect all the electrical path.
In this case, you must unplug the battery connectors and DC-plug to reset the protection circuit.

ODUPSC1

Data sheet

Compatible with
ODROID-C1
Package Includes
3000mAh battery pack, DC Plug Cable soldered UPS2 board, 3pin jumper wire (11mm), 4 x 20mm PCB spacers (Plastic), 4 x 11mm PCB spacers (Metal),4 x 10mm PCB spacers (Plastic), 5V/2A Power Supply
Battery Life
4 hrs approx.
Charging Time
1hr 30min ~2 hrs
Idle Current
250 ~ 300mA @5V
Output Current
2000mA @ DC 5V
Input Power
2000mA @ DC 5V
Return Warranty
No Returns
Manufacturer Warranty
No Returns

Specific References

Only registered users can post a review. Log in or create an account .

No reviews at this time.

Only registered users can report abuse. Log in or create an account .
Only registered users can vote for a review.  Log in or create an account .