ODROID-HC2 Cases

Pre-installed Android version.

This “Case Type 7” is designed for the user who needs high bandwidth network with mid-range storages.

Speaker : 0.5Watt 8Ω Mono speaker

Joystick : Analog Joystick

The CloudShell-2 for the ODROID-XU4 is an affordable DIY Network Attached Storage (NAS) Solution with RAID support.

USB host port on your PC or Smartphone chargers can supply the power to ODROID-C via this cable.

* Amlogic ARM® Cortex®-A5(ARMv7) 1.5Ghz quad core CPUs 
* Mali™-450 MP2 GPU (OpenGL ES 2.0/1.1 enabled for Linux and Android)
* 1Gbyte DDR3 SDRAM
* eMMC4.5 HS200 Flash Storage slot / UHS-1 SDR50 MicroSD Card slot

Highly recommended item to protect a ODROID-HC1.

The MC1 was originally designed to be 4 stackable units, each with a specially designed Single Board Computer (SBC) based on the Samsung Exynos 5422 Octa-core processor

Pre-installed Android version.

This is a single LCD module as a spare part that we’ve put into the ODROID-GO kit.
The display has 320×240 pixels and the communication interface is SPI.

You can show colorful texts and pictures via USB interface with VT100/ANSI style commands without big HDMI monitor. You can connect this tiny display to your ODROID as well as Mac, Linux PC, Windows PC even an enterprise server.

The UPS2 for C1 is designed specifically for the ODROID-C1. 
Uninterrupted Power Supply is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails. The on-battery runtime of most uninterruptible power sources is relatively short but sufficient to start a standby power source or properly shut down the ODROID-C1

The HiFi Shield Plus provides both stereo RCA connectors to connect to external amplifiers and other audio equipment. Via TI’s high-end PCM5242 DAC chip(known as Burr-Brown), it supports 16, 24, 32 bit audio formats with minimal THD+N ratio (0.002%) and ideal dynamics (114dB+), plus amazing sampling rates of 384kHz

Compatible Power adapter for ODROID-H2+, ODROID-HC4