ODROID-U3 Casing

Pre-installed Android version.

Made with an OLED display and RTC chip, this module can be mounted on ODROID-HC4 and ODROID-HC4-P products.

Fully assembled 3.2inch display with 320x240 pixels TFT LCD and a resistive touch overlay. Just plug it on top of ODROID-C1. 2x13 tall female header is already soldered on the PCB.

This is the only way that you can upgrade your OS in the eMMC. It is highly recommended item.

ODROID-GO Ultra is a gaming centered development platform with an upgraded circuit system which requires a heatsink to cooldown its powerful CPU.

This uses I2S as digital sound standard for audio output. It is super easy.  You'll be rockin' out in 15 minutes.

WIFI Module #5BK uses the same chipset (Realtek RTL8821CU) as WIFI Module #5B, so it is 100% compatible. IEEE 802.11ac/a/b/g/n WLAN and Bluetooth combo module with onboard 2.4Ghz and 5.8Ghz Dual band antenna.

Highly recommended item to protect a ODROID-XU4.

Discontinued

* Amlogic ARM® Cortex®-A5(ARMv7) 1.5Ghz quad core CPUs 
* Mali™-450 MP2 GPU (OpenGL ES 2.0/1.1 enabled for Linux and Android)
* 1Gbyte DDR3 SDRAM
* eMMC4.5 HS200 Flash Storage slot / UHS-1 SDR50 MicroSD Card slot

Note: Input voltage should be no more than rated voltage,or the module will be burnt

USB host port on your PC or Smartphone chargers can supply the power to ODROID-C via this cable.

Additional boards for DIY projects or Arduino Camp? This is a spare part for ODROID-GO kit.