44-Pin IDE Female/Female Cable - 5 CM
44-Pin IDE Female to Female Cable is short, but very efficient, and is easy to enclose.
The 44-pin short cable with 2 mm pitch connector is suitable for 2.5 inch HDDs. It has opposed female connectors for easier mounting inside CASE1Cx / CASE1Dx enclosures.
44-Pin IDE Female to Female
50mm (5 CM)
Standard 30 Days
1 Year Limited Warranty
16 other products in the same category:
heat spreader placement fixture for apu2 / apu3 boards.
SPI flash recovery board for apu2/apu3 system boards.
It is card reader and writer, you can fastly transfer your data from your card to your PC, or from your PC to your card. just plug and play! No external power required and NO need to install drivers. Suitable to transfer Images on CF Cards for ALIX /APU boards or others.
11 In Stock
This is a 44 pin cable with 2 mm pitch connectors for 2.5" HDDs. Shortened version with opposed connectors for easier mounting inside case1c / case1d enclosures
45 In Stock
PC Engines SATA data with Power cable for APU Boards has three connectors, , data / power on drive end, separate SATA data and 2 pin power header for APU System board end.
Out of stock
The APU2E4 Platform is the alternate next generation of low-cost APU series (APU1D4) from PCEngines. Next batch Expected June 2021
16 In Stock
Enclosure designed for ALIX.2* boards. Cutouts for 3 LEDs and 1 switch in front, cutouts for DB9, 2 LAN, 3 or 2 SMA connectors, DC jack in back. Enclosure made of anodized or painted aluminum. Dimensions 168 mm wide x 157 mm deep x 30 mm high. RoHS compliant.
1302 In Stock
Convert any half size miniPCI-e to FULL size miniPCI-e
Out of stock
It is a high performance mini-ITX embedded board with AMD GX Series (Quad-Core) CPU 1GHz with 64 bit and 2MB L2 cache featuring 3 Intel i211AT & DDR3-1333 DRAM.
20 In Stock
Supports SATA Interface rate of 6Gb/s
Ultra high-performance and low power consumption
Supports dynamic power management and SMART TRIM Command Supported
Silicon Labs CP2104 controller, which has proven reliable in our experience. Unlike competitors, our adapter has the DB9F female connector with null-modem pin-out to allow for direct connection to Alix/APU system boards without a DB9 null modem cable
Small Footprint with High Power Density
Meets EMS EN50082-2/EN61000-6-2 Heavy Industry Level (35~150 W) Withstands 300 VAC Surge Input for 5 Seconds
20 In Stock
Good thermal conductivity performance to join CPU/GPU and heat sink together. CPU's heat can be passed to the heat sink faster and also Enhances the cooling effect of heat sink.
12 In Stock
The LPC module will override the on-board flash, which could be blank or corrupted on PCEngines APU Boards.
10 In Stock
PC Engines Remote Display Kit for POST4D connects with POST4D PCI POST card. Its 20 inch cable allows display to be placed in a more suitable location.
Exact specifications as per PCEngine's recommendations. Suitable for all ALIX boards other than ALIX.1D/1E,
Switching adapter with US plug, with FCC. ROHS and CEC compliant
Product added to compare.