PC Engines AMD ALIX2D2 System Board
PC Engines ALIX 2D2 System Board 2 LAN is a low-cost minilTX form factor system board optimized for high performance. This board is a perfect replacement for the WRAP series of system boards.
PC Engines ALIX 2D2 System Board 2 LAN is a low-cost minilTX form factor system board optimized for high performance. This board is a perfect replacement for the WRAP series of system boards. This PC Engines ALIX System Board is a Single Board Computer (SBC) which can be used as thin clients, kiosks, educational projects, software-defined networks (SDN) or any other special purpose network device like a wireless access point, firewall, router etc.
500 MHz AMD Geode LX800
256 MB DDR DRAM
DB9 serial port, dual USB port
6 x 6" (152.4 x 152.4 mm)
CompactFlash socket, 44 pin IDE header
2 Ethernet channels (Via VT6105M 10/100)
2 miniPCI slots, LPC bus
DC jack or passive POE, min. 7V to max. 20V
Standard 30 Days
2 Years Limited Warranty
16 other products in the same category:
1302 In Stock
Convert any half size miniPCI-e to FULL size miniPCI-e
Out of stock
ALIX 3D3 is a miniITX form factor system board optimized for thin clients, industrial user, wireless access points, internal and external mesh networks, firewalls and embedded applications.
12 In Stock
PC Engines 1GB CompactFlash Card - Updated Firmware supports DMA board. SLC flash offers higher endurance (100K vs. 10K erase cycles) and better read performance.
10 In Stock
PC Engines IDE Straight Conn to CompactFlash Adapter (IDE Straight Conn) is a perfect replacement for PC hard disk drives, floppy power connector and 40 pin IDE connector.
Solid state replacement for 2.5" hard disk drives, 44 pin IDE connector. This version includes mounting hole locations for regular and legacy 2.5" hard drives.
22 In Stock
Indoor Black/Blue/Red Enclosures for PCEngines APU4 boards.
13 In Stock
PCEngines Indoor Red Enclosure for APU & ALIX2D13 is designed for Following boards
Supports SATA Interface rate of 6Gb/s
Ultra high-performance and low power consumption
Supports dynamic power management and SMART
TRIM Command Supported
Out of stock
ALIX 3D2 is a miniITX form factor system board optimized for thin clients, industrial user, wireless access points, internal and external mesh networks, firewalls and embedded applications. (1 LAN / 2 miniPCI / LX800 / 256 MB / USB)
The IP based Power Switch is a simple product that automatically power-cycles any device when internet connectivity is lost or you want to do it manually. This is one of the best power solution for remote locations where you have to send tech only for power cycle.
10 In Stock
PC Engines Remote Display Kit for POST4D connects with POST4D PCI POST card. Its 20 inch cable allows display to be placed in a more suitable location.
20 In Stock
Enclosure designed for ALIX.2* boards and APU2C0. Cutouts for 3 LEDs and 1 switch in front, cutouts for DB9, 2 LAN, 3 or 2 SMA connectors, DC jack in back. Enclosure made of anodized or painted aluminum. Dimensions 168 mm wide x 157 mm deep x 30 mm high. RoHS compliant.
APU3B4 System board is same family of PCEngines APU boards, focused on this board is 3G/LTE applications where failover between two networks capability is required or mission critical.
32 In Stock
It is a high performance mini-ITX embedded board with AMD GX Series (Quad-Core) CPU 1GHz with 64 bit and 2MB L2 cache featuring 4 Intel i211AT & 4GB DDR3-1333 DRAM.
APU4D4 Pre-Installed Systems
Out of stock
The APU2E4 Platform is the alternate next generation of low-cost APU series (APU1D4) from PCEngines. Next batch Expected June 2021
Fan Mounting Kit for CASEDUALBOARD2
Product added to compare.