- New
Availability: 33 In Stock
PC Engines SATA data with Power cable for APU Boards has three connectors, , data / power on drive end, separate SATA data and 2 pin power header for APU System board end.
APU6B4 System Board
Reference: APU6B4
US$225.00
APU6B4 is a high performing AMD Embedded G series GX-412TC based motherboard and also comes with an SFP port, 4 GB DDR3-1333 DRAM and more.
The APU6B4 is a small form factor system board designed for embedded applications. It features an AMD Embedded G series GX-412TC CPU, with a 1 GHz quad Jaguar core that supports 64 bit and AES-NI encryption. Each core has a 32K data + 32K instruction cache, and they share a 2MB L2 cache. The board is equipped with 4 GB DDR3-1333 DRAM for memory.
For storage, the APU6B4 can boot from an SD card via its internal sdhci controller. It also supports external USB or m-SATA SSDs, and has a SATA + power connector. The mSATA is shared with the miniPCI express slot. The board requires a 12V DC power supply and consumes about 6 to 12W depending on CPU load. The power jack is 2.5 mm with the center positive.
Connectivity options include 1 SFP port (Gigabit, Intel i210IS) and 3 Gigabit Ethernet channels (Intel i211AT). The board has a microUSB serial port, 2 USB 3.0 external ports and 4 USB 2.0 internal ports. It also has three front panel LEDs and a pushbutton.
Expansion options include 3 miniPCI express slots, with J14 intended for Wi-Fi and lacking a SIM, J13 offering USB only with SIM for modem, and J16 offering USB or mSATA, with an optional SIM. The board also has a GPIO header, optional I2C bus, and COM2 (3.3V RXD / TXD).
The APU6B4 measures 6 x 6" (152.4 x 152.4 mm), which is the same size as other popular system boards like the apu1d, alix2d13, and wrap1e. The board's firmware is coreboot. The cooling system uses a conductive method from the CPU to the enclosure, using a 3 mm alu heat spreader that is included with the board.
Directly ship from Canada!
APU6B4
Data sheet
- Processor (CPU)
- AMD Embedded G series GX-412TC, 1 GHz quad Jaguar core with 64 bit and AES-NI support, 32K data + 32K instruction cache per core, shared 2MB L2 cache.
- I/O
- microUSB serial port, 2 USB 3.0 external + 4 USB 2.0 internal, three front panel LEDs, pushbutton
- Board Size
- 6 x 6" (152.4 x 152.4 mm) - same as apu1d, alix2d13 and wrap1e.
- RAM
- 4 GB DDR3-1333 DRAM
- Storage
- Boot from SD card (internal sdhci controller), external USB or m-SATA SSD. 1 SATA + power connector. mSATA is shared with miniPCI express.
- Connector
- 1 SFP port (Gigabit, Intel i210IS), 3 Gigabit Ethernet channels (Intel i211AT)
- Firmware
- coreboot
- Expansion
- 3 miniPCI express (J14: full miniPCI express, but no SIM, intended for wifi), J13 USB only, with SIM for modem, J16 USB or mSATA, optional SIM); GPIO header, optional I2C bus, COM2 (3.3V RXD / TXD).
APU6B4 is a high performing AMD Embedded G series GX-412TC based motherboard and also comes with an SFP port, 4 GB DDR3-1333 DRAM and more.
16 other products in the same category:
Availability: 55 In Stock
Supports SATA Interface rate of 6Gb/s
Ultra high-performance and low power consumption
Supports dynamic power management and SMART
TRIM Command Supported
Availability: 7 In Stock
• Mikrotik RouterOS is ultra picky about CF controllers, not recommended.
• Please note that these cards support DMA, must disable DMA when used on WRAP.1C / .1D / .2C boards.
Availability: 21 In Stock
Small Footprint with High Power Density
Meets EMS EN50082-2/EN61000-6-2 Heavy Industry Level (35~150 W)
Withstands 300 VAC Surge Input for 5 Seconds
Availability: 5 In Stock
Solution for PCEngines & MikroTik boards in a 19" 1U rack mount enclosure to install in data center. Ideal for redundant or high performance firewalls, VPN solutions, VOIP solutions and more, great choice to rack mount low power and fanless boards.
Availability: Out of stock
The APU2E4 Platform is the alternate next generation of low-cost APU series (APU1D4) from PCEngines.
*Heat Spreader Kit for APU Board is included
Availability: 10 In Stock
SPI flash recovery board for apu2/apu3 system boards.
Availability: 20 In Stock
3/16" nut driver bit optimized for DB9 / D-Sub hex nuts. 1/4" hex end fits common electric screwdrivers.
Availability: Out of stock
PCEngines Indoor Red Enclosure for APU & ALIX2D13 is designed for Following boards
APU Series
Availability: 5 In Stock
The cable has enough cross-links between the signals to transmit and receive data with accuracy. Moreover, this is used mostly to transfer files from one computer to another.Null Modem Cable (DB9F - DB9F) is a cross linked cable.
Availability: 5 In Stock
Exact specifications as per PCEngine's recommendations. Suitable for all ALIX boards other than ALIX.1D/1E, Switching adapter with US plug, with FCC. ROHS and CEC compliant
Availability: 9 In Stock
ALIX 2D13 is a miniITX form factor system board optimized for thin clients, industrial user, wireless access points, internal and external mesh networks, firewalls and embedded applications. (3 LAN / 1 mini PCI / LX800 / 256 MB / USB / Battery)
Availability: 298 In Stock
The APU4D4 System Board is a highly capable networking hardware solution by PC Engines. Featuring a quad-core AMD GX-412TC processor, four Gigabit Ethernet ports, a miniPCIe socket, and open-source firmware, it is an ideal low-power networking device for custom solutions, IoT, and home automation.
*Heat Spreader Kit for APU Board is included
Availability: 50 In Stock
PCEngines Indoor Blue Enclosure for APU & ALIX2D13 is designed for ALIX2D13, APU1D, APU1D4 boards
Availability: 10 In Stock
APU2E5 is the exact same as APU2E4 except for the configuration of NIC chips. APU2E4 has i210-AT. APU2E5 has i211-AT. Performance is pretty much similar.
Note: Can connect 2x WiFi Cards
*Heat Spreader Kit for APU Board is included