2.5" SSD Kit with SATA/SATA Cable (FW2700)
Use this SSD Kit to install 2.5" SSD Drive in FW2700 Network Appliance.
Package Includes: SATA/SATA Cable Bracket for 2.5" SSD Assembly Screws for HDD & Bracket
Screws, SATA/SATA Cable, Bracket for 2.5"SSD
16 other products in the same category:
heat spreader placement fixture for apu2 / apu3 boards.
16 In Stock
Enclosure designed for ALIX.2* boards. Cutouts for 3 LEDs and 1 switch in front, cutouts for DB9, 2 LAN, 3 or 2 SMA connectors, DC jack in back. Enclosure made of anodized or painted aluminum. Dimensions 168 mm wide x 157 mm deep x 30 mm high. RoHS compliant.
12 In Stock
PC Engines 1GB CompactFlash Card - Updated Firmware supports DMA board. SLC flash offers higher endurance (100K vs. 10K erase cycles) and better read performance.
APU3B4 System board is same family of PCEngines APU boards, focused on this board is 3G/LTE applications where failover between two networks capability is required or mission critical.
34 In Stock
Please note that these cards support DMA, must disable DMA when used on WRAP.1C / .1D / .2C boards.
Out of stock
ALIX 3D2 is a miniITX form factor system board optimized for thin clients, industrial user, wireless access points, internal and external mesh networks, firewalls and embedded applications. (1 LAN / 2 miniPCI / LX800 / 256 MB / USB)
12 In Stock
44-Pin IDE Female to Female Cable is short, but very efficient, and is easy to enclose.
Supports SATA Interface rate of 6Gb/s
Ultra high-performance and low power consumption
Supports dynamic power management and SMART
TRIM Command Supported
It is a high performance mini-ITX embedded board with AMD GX Series (Quad-Core) CPU 1GHz with 64 bit and 2MB L2 cache featuring 3 Intel i211AT & DDR3-1333 DRAM with optimized for 3G/LTE Modems. Next batch Expected end of may
116 In Stock
Exact specifications as per PCEngine's recommendations. Suitable for all ALIX boards other than ALIX.1D/1E, Switching adapter with US plug, with FCC. ROHS and CEC compliant.
USB specification revision 2.0 & 1.1 compliant Support RS232 serial interface (DB9 pins) Support over 1Mbps data transfer rate Support remote wake-up and power management Support Windows98/SE/ME/2000/XP/Vista/Windows 7 (32/64bit) and Mac OS9.0/OSX/Linux Suitable for PDA and Modem Driver CD included
The IP based Power Switch is a simple product that automatically power-cycles any device when internet connectivity is lost or you want to do it manually. This is one of the best power solution for remote locations where you have to send tech only for power cycle.
Exact specifications as per PCEngine's recommendations. Suitable for all ALIX boards other than ALIX.1D/1E,
Switching adapter with US plug, with FCC. ROHS and CEC compliant
40 In Stock
It is a high performance mini-ITX embedded board with AMD GX Series (Quad-Core) CPU 1GHz with 64 bit and 2MB L2 cache featuring 3 Intel i211AT & DDR3-1333 DRAM with optimized for 3G/LTE Modems.
19 In Stock
3/16" nut driver bit optimized for DB9 / D-Sub hex nuts. 1/4" hex end fits common electric screwdrivers.
12 In Stock
The LPC module will override the on-board flash, which could be blank or corrupted on PCEngines APU Boards.
Product added to compare.