Indoor Enclosure for APU4 - 4 LAN
Indoor Black/Blue/Red Enclosures for PCEngines APU4 boards.
Tools needed: Phillips screw driver, 5 mm or 3/16" nut driver. Remove hex nuts from DB9 connector of APU board. Mount APU board in enclosure, then fasten all screws and hex nuts.
- Compatible with
- APU4C2, APU4C4
- 8 Screws
- Back Cutouts
- 1 x DC Power Jack, 1 x DB9 Serial, 4 x Ethernet, 2 x USB and 2x SMA antenna Connector
- Front Cutouts
- 3 LEDs & 1 Reset
- Anodized or painted aluminum
- Package Includes
- 1 x Enclosure top, 1 x Enclosure base, 4 x screws to mount system board, 4 x Screws to close enclosure, 4 x Self-Adhesive Feet, 2 x Rubber Plugs for unused SMA holes
- Board Category
16 other products in the same category:
HDD Mounting Kit for CASEDUALBOARD2
Availability: 13 In Stock
PCEngines Indoor Red Enclosure is designed for Following boards.
ALIX2D13, APU1, APU2 and APU3 models.
Availability: 46 In Stock
The APU2E4 Platform is the alternate next generation of low-cost APU series (APU1D4) from PCEngines.
*Heat Spreader Kit for APU Board is included
Availability: 47 In Stock
PCEngines Indoor Black Enclosure designed for ALIX2D13 and APU1, APU2 and APU3 Series boards.
Availability: 19 In Stock
Internal DC Fan for 19" DualRack Enclosure for APU and MikroTik RB boards.
Availability: 25 In Stock
Small Footprint with High Power Density
Meets EMS EN50082-2/EN61000-6-2 Heavy Industry Level (35~150 W)
Withstands 300 VAC Surge Input for 5 Seconds
PCEngines Indoor Red Enclosure for APU & ALIX2D13 is designed for Following boards
Availability: 51 In Stock
PCEngines Indoor Blue Enclosure for APU & ALIX2D13 is designed for ALIX2D13, APU1D, APU1D4 boards
Availability: 34 In Stock
PC Engines SATA data with Power cable for APU Boards has three connectors, , data / power on drive end, separate SATA data and 2 pin power header for APU System board end.
Availability: Out of stock
PC Engines 1GB CompactFlash Card - Updated Firmware supports DMA board. SLC flash offers higher endurance (100K vs. 10K erase cycles) and better read performance.
Mouse Keyboard I/O Splitter Cable Adapter is suitable for laptops, PCs or even ALIX 1C boards.
Availability: 10 In Stock
PC Engines Remote Display Kit for POST4D connects with POST4D PCI POST card. Its 20 inch cable allows display to be placed in a more suitable location.
heat spreader placement fixture for apu2 / apu3 boards.
Availability: 18 In Stock
This 16GB mSATA SSD Module (Updated Firmware) is perfect for use with latest APU board. Works well for Windows XP, Windows 7, Linux and MacOS10.X.
Availability: Out of stock
It is a high performance mini-ITX embedded board with AMD GX Series (Quad-Core) CPU 1GHz with 64 bit and 2MB L2 cache featuring 3 Intel i211AT & DDR3-1333 DRAM with optimized for 3G/LTE Modems.
Expected in 2022
Product added to compare.