Indoor Black/Blue/Red Enclosures for PCEngines APU4 boards.
Reference: EZ-62b
The IP based Power Switch is a simple product that automatically power-cycles any device when internet connectivity is lost or you want to do it manually. This is one of the best power solution for remote locations where you have to send tech only for power cycle.
ezOutlet3 is designed to automatically check if the network connection is online. Should the network goes off-line the outlet is designed to automatically power-cycle. Useful as a watchdog to ensure remote network (router/modem) is 247 online.
For indoor use only
Remotely turn outlet On / Off / Reset via free Android / iOS APP
Secure outlet to reset only to avoid accidental turn offs and set schedules.
Data sheet
Download
The IP based Power Switch is a simple product that automatically power-cycles any device when internet connectivity is lost or you want to do it manually. This is one of the best power solution for remote locations where you have to send tech only for power cycle.
Indoor Black/Blue/Red Enclosures for PCEngines APU4 boards.
Wall mount bracket for case1d* enclosures.
PCEngines Indoor Red Enclosure is designed for Following boards.
ALIX2D13, APU1, APU2 and APU3 models.
The cable has enough cross-links between the signals to transmit and receive data with accuracy. Moreover, this is used mostly to transfer files from one computer to another.Null Modem Cable (DB9F - DB9F) is a cross linked cable.
APU2E5 is the exact same as APU2E4 except for the configuration of NIC chips. APU2E4 has i210-AT. APU2E5 has i211-AT. Performance is pretty much similar.
Note: Can connect 2x WiFi Cards
*Heat Spreader Kit for APU Board is included
4GB SLC flash offers higher endurance (100K vs. 10K erase cycles) and better read performance.
Small Footprint with High Power Density
Meets EMS EN50082-2/EN61000-6-2 Heavy Industry Level (35~150 W)
Withstands 300 VAC Surge Input for 5 Seconds
Supports SATA Interface rate of 6Gb/s
Ultra high-performance and low power consumption
Supports dynamic power management and SMART
TRIM Command Supported
PC Engines SATA data with Power cable for APU Boards has three connectors, , data / power on drive end, separate SATA data and 2 pin power header for APU System board end.
The APU1D4 Platform is the alternate next generation of low cost Alix series (Alix.2D13 & Alix.6F2) from PC Engines. It is a high performance mini-ITX embedded board with AMD G Series (Dual-Core) CPU 1GHz with 64 bit and 512MB L2 cache featuring 3 Realtek Gigabit Ethernet & DDR3-1066 DRAM..
A performance class SD memory card designed to meet the storage demands of high-quality electronic devices.
Good thermal conductivity performance to join CPU/GPU and heat sink together. CPU's heat can be passed to the heat sink faster and also Enhances the cooling effect of heat sink.
It is a high performance mini-ITX embedded board with AMD GX Series (Quad-Core) CPU 1GHz with 64 bit and 2MB L2 cache featuring 4 Intel i211AT & 2GB DDR3-1333 DRAM.
*Heat Spreader Kit for APU Board is included
Please note that these cards support DMA, must disable DMA when used on WRAP.1C / .1D / .2C boards.
Silicon Labs CP2104 controller, which has proven reliable in our experience. Unlike competitors, our adapter has the DB9F female connector with null-modem pin-out to allow for direct connection to Alix/APU system boards without a DB9 null modem cable