Enclosure designed for Raspberry-PI boards in rectangular version and consists of two identical halves that fit togather. It has windows on four sides for direct access to components. Well suited for users who frequently connect and disconnect from the PCB ports.
- Embedded Systems
- Ready Systems addremove
- IoT addremove
- VoIP addremove
- Wireless addremove
-
Components
add remove
- STEM Education
- Combo Kits
- Services
- Support
- Contact Us
Flex Cable for Pi Camera - 300mm / 12"
Reference: FCPI30012
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
Data sheet
- Weight
- 3.0g
- Width
- 16mm
- Length
- 300mm (12 inch)
- Categories
- Cables
- Return Warranty
- No Returns
- Manufacturer Warranty
- No Returns

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
16 other products in the same category:
5.0" 40-pin TFT Display - 800x480 with Touchscreen
Simplify your Internet of Things with a passive PoE injector cable. These are quite handy for projects that have Ethernet connectivity and also need a power cable.
The USB 2.0 Extension Cable extend the distance between your USB peripheral and your USB hub or computer assure good signal quality to meet USB specification.
- 1.2GHz QUAD Core Broadcom BCM2837 64bit ARMv8 processor
- BCM43438 WiFi on board
- Bluetooth Low Energy (BLE) on board
- 1GB RAM
- 4x USB 2 ports
- 40pin extended GPIO
- HDMI and RCA video output
The RC Air Mouse and Keyboard uses the latest 2.4GHz wireless technology with a sampling frequency up to 120Hz. Use it like a Wii remote to control your mouse cursor on the screen.
The Compute Module 4 IO Board is a companion board for Raspberry Pi Compute Module 4. It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products.
A super handy switch cable for your Raspberry Pi 4 Model B , removing the need to pull the USB-C connector out of your Raspberry Pi (or mess around with sockets/plugs) every time you want to power up/down.
Designed to keep your Raspberry Pi 4 Model B cool, our case features 'hex' ventilation paired with a 5V cooling fan (included). Also includes a set of rubber feet!
Enclosure designed for Raspberry-PI boards in rectangular version and consists of two identical halves that fit togather. It has windows on four sides for direct access to components. Well suited for users who frequently connect and disconnect from the PCB ports. Excellent heat dissipation capabilities. Easy access to the GPIO Headers (auxiliary 26 pins).
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
Are you bothered by the heat problem of the Raspberry Pi? Don't worry, we have prepared a set of heat dissipation solutions for Raspberry Pi 4B. These black aluminum heat sinks of various sizes adopt a slotted design on the surface, which is more conducive to heat dissipation. They also come with adhesive backing for easy installation.
Separated pin plugs, this cable is ideal for powering and connecting up to the debug/login console on the Raspberry Pi or BeagleBone Black. Connect the pins as shown to power the Pi or BBB and establish the RX/TX link.
This is a breadboard, good for small projects. It's 5.5 cm x 16.5 cm with a standard double-strip in the middle and two power rails on both sides.
The Raspberry Pi Pico is an entirely new type of microcontroller from Raspberry Pi. Small, cheap and flexible - it’s great for learning to code with MicroPython!
Flirc allows you to pair any remote control with your computer or media center (Including the Raspberry Pi!). Just walk through our super simple cross platform pairing application, and you're done. Use your previously paired remote with no additional software on any machine with Flirc.