Accessories

Industrial USB to TTL Converter Industrial USB to TTL Converter 2
In Stock
Accessories

Industrial USB to TTL Converter

CorpShadow
IUSBTTLC
US$9.50
This industrial USB to TTL converter adopts an original FT232RL chip, providing greater stability and compatibility, enabling industrial-grade high-performance communication between a computer and TTL devices.
IDE to CompactFlash adapter (HDD power)
In Stock
Mounting / Adapters

IDE to CompactFlash adapter (HDD power)

CF1EH
US$8.59
Solid state replacement for 3.5" hard disk drives, 40 pin IDE connector. Mounting hole locations same as the bottom holes of a hard disk drive.
mSATA SSD to 2.5" SATA Drive Adapter
In Stock
Mounting / Adapters

mSATA SSD to 2.5" SATA Drive Adapter

ADTMSSATA
US$9.95
This 50mm Small board mSATA SSD to 2.5" SATA Drive Converter Adapter is the best choice for any custom project.
2.5 HDD SATA USB Adapter
In Stock
Mounting / Adapters

2.5 HDD SATA USB Adapter

USB2SATA
US$8.95
A great choice for your tool kit, this low cost adapter gives you freedom to access any 2.5" SATA drive
M1 SATA mount and cable kit
In Stock
Mounting / Adapters

M1 SATA mount and cable kit

ODM1SMKIT
US$13.70
A single native (non-USB) SATA 3.0 port on the ODROID-M1 is provided for use with a 2.5inch HDD or SSD NAND Memory storage device. This SATA interface delivers near 500MB/s of sequential access. The SATA mount kit contains a SATA Data cable, a SATA Power cable, and a mount plate with some support screws. However, since the SATA power port doesn’t have a...
Protective Cap for N Female
In Stock
Accessories

Protective Cap for N Female

PCEngines
CAPNF
US$2.99
PC Engines N Female Protective Cap is watertight enough for covering unused ports of N female connectors.   Suitable for use with PIGNF6. Does not have a rubber seal.
APU Enclosure Screw Set
In Stock
Accessories

APU Enclosure Screw Set

CorpShadow
ESSET
US$1.00
4 screws to mount system board, 4 screws to close enclosure
PC Engines PCI Post Code Display
In Stock
Accessories

PC Engines PCI Post Code Display

PCEngines
POST4D
US$8.89
PC Engines PCI Post Code Display - Motherboard Diagnostic Display is used to write diagnostic codes on PC BOIS. Dual digit LED display indicates codes and power supply rails.
DB9 Female to Female 9-Pin RS-232
  • -50%
In Stock
Accessories

DB9 Female to Female 9-Pin RS-232

CorpShadow
GCDB9F2F
US$2.98 US$5.95
This connector is ideal to extend Null Modem Cable with DB9 male connectors, allowing you to connect a serial printer to a 9-pin serial port, or transfer files from PC to PC via serial cable connection.
OLED+RTC for HC4-P OLED+RTC for HC4-P 2
On BackOrder, Order to Reserve
Accessories

OLED+RTC for HC4-P

HardKernel
OLEDRTCHC4
US$13.00
The OLED+RTC for HC4-P is an expansion board that adds a 0.96-inch OLED display and real-time clock to the ODROID-HC4 single-board computer. It connects via I2C interface and provides accurate timekeeping even when the HC4-P is powered off, making it easy to set up and use.
DC COOLING FAN W/ PWM, SPEED SENSOR (TACHO)
In Stock
Accessories

DC COOLING FAN W/ PWM, SPEED SENSOR (TACHO)

HardKernel
ODFANN4
US$7.25
The DC Cooling Fan with PWM and Speed Sensor (Tacho) is an efficient cooling solution for electronic devices. With its built-in PWM control and speed sensor, it provides optimal cooling performance while allowing precise fan speed adjustment. Keep your equipment cool and protected with this reliable and versatile cooling fan.
COOLING FAN WITH 2PIN CONNECTOR COOLING FAN WITH 2PIN CONNECTOR 2
In Stock
Accessories

COOLING FAN WITH 2PIN CONNECTOR

HardKernel
ODFANN2
US$7.25
The Cooling Fan with 2-pin Connector is a versatile cooling solution designed to effectively dissipate heat from a wide range of electronic devices. With its compact and efficient design, this fan ensures optimal airflow and temperature regulation. The included 2-pin connector allows for easy integration and secure connectivity, making installation a...
Joystick, speaker kit for ODROID-GO ADVANCE
In Stock
Accessories

Joystick, speaker kit for ODROID-GO ADVANCE

HardKernel
ODGOABJSPKR
US$4.45
Replacement speaker and joystick assembly for the ODROID-Go Advance system. A direct replacement part for the ones included in the original build of the ODROID Go Advance as shipped.
16Port I2C GPIO Board
In Stock, Shipping Now
Accessories

16Port I2C GPIO Board

HardKernel
ODI2CGPIOB
US$8.95
This module is the 16 way GPIO expander for the I2C interface, and built with the MCP23017.MCP23017 has a high-speed I2C interface which supports the I2C frequency of 100KHz, 400KHz and 1.7MHz. The chip has 3 address pins, which can be set up for 8 different addresses. So 8 modules can be connected through two I2C buses to achieve up to 128 IO extensions.
Color Sensor : TCS3472 RGB Sensor with IR filter
In Stock
Accessories

Color Sensor : TCS3472 RGB Sensor with IR filter

HardKernel
ODCSEN
US$9.99
This RGB color sensor module is based on the TCS34725 sensor chip made by TAOS. The module is designed by Adafruit who Called it (the best color sensor in the market). This is much confirmed by our own testing and experiments in future Electronics Egypt lab. 
Level Shifter : 5V to 3.3V
In Stock
Accessories

Level Shifter : 5V to 3.3V

HardKernel
ODLS5V33
US$1.75
4 channel IIC I2C Logic Level Converter Bi-Directional Module 5V to 3.3V.
Motion Detector HC-SR501
Directly Ship from Canada
Accessories

Motion Detector HC-SR501

HardKernel
ODMODET
US$3.00
The HC-SR501 Infrared PIR Motion Sensor Module auto-senses light in various applications (in house, basement, outdoor, warehouse, garage, etc,) for ventilator control, alarm, etc. Infrared technology (LHI778 probe design) high sensitivity & high reliability. ultra-low-voltage. widely used especially for battery-powered products. This HC-SR501 Infrared...
C2/C1 Tinkering Kit
Directly Ship from Canada
Accessories

C4/C2/C1 Tinkering Kit

HardKernel
C2THKIT
US$21.65
You're probably itching to make some fun embedded computer projects with ODROID-C2 or ODROID-C1+.
I2S 2Watt Stereo Boom Bonnet Kit
On Back-Order
Accessories

I2S 2Watt Stereo Boom Bonnet Kit

HardKernel
ODI2SSBBK
US$19.98
This uses I2S as digital sound standard for audio output. It is super easy.  You'll be rockin' out in 15 minutes.
BISCUIT™ - PROGRAMMABLE WI-FI 9-AXIS ABSOLUTE ORIENTATION SENSOR
In Stock
Accessories

BISCUIT™ - PROGRAMMABLE WI-FI 9-AXIS ABSOLUTE ORIENTATION SENSOR

HardKernel
ODBISCWIFI
US$40.95
The BISCUIT™ is a programmable Wi-Fi 9-axis absolute orientation sensor that offers a versatile solution for tracking and monitoring spatial movement. With its integrated Wi-Fi connectivity, it provides seamless wireless data transmission and precise orientation sensing capabilities. Unlock new possibilities in robotics, virtual reality, and motion...
Colling fan XU4 Blue
In Stock
Accessories

Cooling Fan XU4 Blue

HardKernel
ODCFXU4B
US$7.95
The Cooling Fan XU4 Blue is a dedicated cooling solution designed specifically for the ODROID-XU4 single-board computer. With its vibrant blue color, it adds a touch of style to your setup while effectively dissipating heat to ensure optimal performance. The compact design and low noise operation make it an ideal cooling solution for your XU4.
Universal Motion Joypad Universal Motion Joypad 2
  • On sale!
Directly Ship from Canada
Accessories

Universal Motion Joypad

HardKernel
ODUMJ
US$20.00
The Universal Motion Joypad is a game controller that offers a unique gaming experience, similar to the steering wheel available for the Nintendo Wii. It features motion sensing technology that enables players to control their game character by tilting or moving the controller, adding a new level of interactivity to gaming.
Cooling Fan XU4 Cooling Fan XU4 2
Out of Stock
Accessories

Cooling Fan XU4

HardKernel
ODCFXU4
US$7.95
The Cooling Fan XU4 is a specially designed fan for the ODROID-XU4 single-board computer. Engineered to effectively dissipate heat, this fan ensures optimal performance and temperature regulation for your XU4. With its compact size and quiet operation, it provides reliable cooling without compromising on noise levels. Keep your XU4 cool and running...
View
Servo Motor
Directly Ship from Canada
Accessories

Servo Motor

HardKernel
ODSERVOM
US$6.95
Servo motor for custom project, use it with Odroid or any other hardware.
Cooling Fan U3 Cooling Fan U3 2
In Stock
Accessories

Cooling Fan U3

HardKernel
ODCFU3
US$7.95
The Cooling Fan U3 is a high-performance cooling solution designed for the ODROID-U3 single-board computer. It effectively dissipates heat, keeping your U3 running at optimal temperatures even during demanding tasks. With its compact design and efficient operation, this cooling fan ensures reliable performance and longevity for your U3 system.
Tea Tea 2
Ships within 5-7 business days
Accessories

Tea

Khadas
K1001
US$259.95
The Khadas K1001 is a high-quality audio DAC and headphone amplifier designed for use with a variety of audio devices, including smartphones, laptops, and single-board computers. With its AK4499EQ DAC chip, low noise floor, and balanced and unbalanced outputs, it delivers exceptional audio quality and versatility in a compact and stylish package. The...
Khadas Screw Set Khadas Screw Set 2
In Stock
Accessories

Khadas Screw Set

Khadas
KHSCREW
US$6.95
4 Cluster Screw for Khadas VIM2
Fan for DualBoard Enclosure
In Stock
Accessories

Fan for DualBoard Enclosure

CorpShadow
CSFAN19
US$8.59
Internal DC Fan for 19" DualRack Enclosure for APU and MikroTik RB boards.
Heat Spreader Kit for APU Boards
In Stock
Accessories

Heat Spreader Kit for APU Boards

PCEngines
APUCOOL
US$4.95
The heat spreader kit is included with apu boards, no need to order separately unless you have to migrate a board to a new enclosure.
Thermal Compound
In Stock
Accessories

Thermal Compound

CorpShadow
TP30WH
US$10.59
Good thermal conductivity performance to join CPU/GPU and heat sink together. CPU's heat can be passed to the heat sink faster and also Enhances the cooling effect of heat sink.
Passive VIMs Heatsink Passive VIMs Heatsink 2
On Back Order, Order to Reserve
Accessories

Passive VIMs Heatsink

Khadas
KAHS-E-002
US$17.95
Thinner fins allow us to squeeze 16 of them into the same space. Compatible with the high-airflow 3705 cooling fan for better cooling with lower noise.
VIMs Heatsink VIMs Heatsink 2
In Stock, Shipping Now
Accessories

New VIMs Heatsink

Khadas
KAHS-V-001
US$17.95
VIMs Heatsink kit is designed for best possible cooling performance when you use VIMs SBC Boards.
Raspberry Pi 5G Development Kit Raspberry Pi 5G Development Kit 2
Ships in 10~15 Days
Accessories

Raspberry Pi 5G Development Kit

CorpShadow
RPCHAT-WG5
US$189.95
5G Development Kit is for M.2 package 5G modems designed to work with the Raspberry Pi. The raspberry Pi 5G modem allows you to develop, trial, and test your ideas on this platform in preparation for the commercialization of 5G devices and networks. Data throughput up to 5.0 Gbps DL and 1.0 Gbps UL is possible with that kit.
Aluminum Heatsink Cooling Kit for Raspberry Pi 4B Aluminum Heatsink Cooling Kit for Raspberry Pi 4B 2
In Stock
Accessories

Aluminum Heatsink Cooling Kit for Raspberry Pi 4B

CorpShadow
CS712
US$8.56
3510 Version Extreme Cooling Fan Kit For Raspberry Pi 4B is a brandnew Cooling system for your Raspberry Pi 4B.It's a completely new radiator, and it's a very cool cooling system after the armor shell.The fan is 3510 version and more powerful but still quite when it is running.Two aluminum blocks will touch the MCU tightly and good for the heat...
Showing 1-50 of 61 item(s)
Accessories
Product added to wishlist
Product added to compare.