Cable is made of 24AWG pure copper listed pair conduits with 50u" gold plated contacts (short body). Most budget cables skimp with 10u". 350 MHz Category 5E Patch Cord (UTP)

Cable is made of 24AWG pure copper listed pair conduits with 50u" gold plated contacts (short body). Most budget cables skimp with 10u". 350 MHz Category 5E Patch Cord (UTP)

Cable is made of 24AWG pure copper listed pair conduits with 50u" gold plated contacts (short body). Most budget cables skimp with 10u". 350 MHz Category 5E Patch Cord (UTP)

Cable is made of 24AWG pure copper listed pair conduits with 50u" gold plated contacts (short body). Most budget cables skimp with 10u". 350 MHz Category 5E Patch Cord (UTP)

Cable is made of 24AWG pure copper listed pair conduits with 50u" gold plated contacts (short body). Most budget cables skimp with 10u". 350 MHz Category 5E Patch Cord (UTP)

IP68 Rated Outdoor Weatherproof field replaceable RJ45 Ethernet connector system. 15CM shielded Cat5e cable.Cat5e RJ45 Plug 8P8C. The system features a shielded RJ45

PC Engines MMCX to N-Female Bulkhead Pigtail is RoHS certified. Engineered for peak performance upto 6GHz operations and usable for any mini-PCI card with MMCX connector.

I-PEX to N-female Bulkhead Cable is RoHS certified. This is suitable for mini-PCI cards with I-PEX connector.

Due to high quality connectors and Cable makes it best choice for performance and engineered for peak performance up to 6GHz.

Due to high quality connectors and Cable makes it best choice for performance and engineered for peak performance up to 6GHz

MMCX Right Angle to RP-TNC Male Bulkhead. Suitable for indoor/outdoor wireless devices, application of this cable to make connection between mini-pci card to antenna.

Suitable for outdoor wireless devices, application of this cable to make connection between Outdoor Wireless Device to antenna.

Due to high quality connectors and Cable makes it best choice for performance and engineered for peak performance up to 6GHz

This certified cable assembly minimize system losses to within known parameters and this cable assembly meet those requirements. 

Suitable for outdoor wireless devices, application of this cable to make connection between Outdoor Wireless Device to antenna.

This certified cable assembly minimize system losses to within known parameters and this cable assembly meet those requirements. 

Due to high quality connectors and Cable makes it best choice for performance and engineered for peak performance up to 6GHz.

Pigtail cable is MMCX to SMA reverse polarity, fully RoHS compliant. Length of cable is 18 cm  (HDF-100 low loss) for indoor applications.

PC Engines Pigtail RPSMA Bulkhead to U.FL is RoHS certified.

Customized Sizes are available

SMA Female pigtails are commonly used for 3G/4G/LTE Antenna ports

The 8P8C is a modular connector commonly used to terminate Cat5/5e cables.

The 8P8C is a modular connector commonly used to terminate Cat5/5e cables.

The 8P8C is a modular connector commonly used to terminate twisted pair and multiconductor flat cable.

The 8P8C is a modular connector commonly used to terminate twisted pair and multiconductor flat cable.

MMCX Terminator – 50 ohm is ideal to terminate unused MMCX ports on high power radios as per the recommendation of Wistron. Works from 0 to 6

The Rj45 inline coupler from CorpShadow allows you to extend the length of two CAT 5/5e patch cables quickly and easily. Designed to provide a female-to-female connection.

DualRack cable harness for PC Engines ALIX/APU boards to connect the internal power supply (J18 Header).
Suitbale for MeanWell power supply RS-35-12.

18AWG is a standard gauge cable, which is suitable for most applications, this cable can carry up to 10 AMPs, 125 Volt load.

Standard power extension cable for computers or general purpose with high quality and UL Certified.

18AWG is a standard gauge cable, which is suitable for most applications, this cable can carry up to 10 AMPs, 125 Volt load.

The connector heads measure 0.51" x 0.36" x 0.25" (13.0 x 9.3 x 6.3 mm) on the USB micro B end and 0.51" x 0.55" x 0.25" (13.0 x 13.8 x 6.3 mm) on the USB A end. 

Raspberry Pi® computer you just got has a row of 2x13 pin headers soldered on - those are the GPIO (general purpose input/output) pins and for those of us who like to hack electronics they are where the real fun is. By programming the Pi, you can twiddle those pins high or low, send and receive I2C and SPI data, and access the 3V and 5V power rails.

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. 

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.

Give your 40 pin, 0.5mm pitch, devices a stretch with this extension board.

USB specification revision 2.0 & 1.1 compliant
Support RS232 serial interface (DB9 pins)
Support over 1Mbps data transfer rate
Support remote wake-up and power management
Support Windows98/SE/ME/2000/XP/Vista/Windows 7 (32/64bit) and Mac OS9.0/OSX/Linux
Suitable for PDA and Modem
Driver CD included

The cable has enough cross-links between the signals to transmit and receive data with accuracy. Moreover, this is used mostly to transfer files from one computer to another.Null Modem Cable (DB9F - DB9F) is a cross linked cable.

Silicon Labs CP2104 controller, which has proven reliable in our experience. Unlike competitors, our adapter has the DB9F female connector with null-modem pin-out to allow for direct connection to Alix/APU system boards without a DB9 null modem cable

PC Engines SATA data with Power cable for APU Boards has three connectors, , data / power on drive end, separate SATA data and 2 pin power header for APU System board end.

PC Engines SATA data with Power cable for APU Boards has three connectors, , data / power on drive end, separate SATA data and 2 pin power header for APU System board end.

SATA cable with combined data / power on drive end, separate SATA data and 2 pin power header for apu end.

44-Pin IDE Female to Female Cable is short, but very efficient, and is easy to enclose.

This is a 44 pin cable with 2 mm pitch connectors for 2.5" HDDs. Shortened version with opposed connectors for easier mounting inside case1c / case1d enclosures 

Mouse Keyboard I/O Splitter Cable Adapter is suitable for laptops, PCs or even ALIX 1C boards.

USB host port on your PC or Smartphone chargers can supply the power to ODROID-C via this cable.