The ODROID-M1 is a single board computer with a wide range of useful peripherals developed for use in a variety of embedded system applications.
There are 57 products.
Solution for PCEngines & MikroTik boards in a 19" 1U rack mount enclosure to install in data center. Ideal for redundant or high performance firewalls, VPN solutions, VOIP solutions and more, great choice to rack mount low power and fanless boards.
Indoor Black/Blue/Red Enclosures for PCEngines APU4 boards.
PCEngines Indoor Red Enclosure is designed for Following boards.
ALIX2D13, APU1, APU2 and APU3 models.
PCEngines Indoor Red Enclosure for APU & ALIX2D13 is designed for Following boards
APU Series
PCEngines Indoor Black Enclosure designed for ALIX2D13 and APU1, APU2 and APU3 Series boards.
PC Engines ALix 2D3/2D13, APU and OpenVox IPC100/IPC110/IPC120 enclosure with 2 x 2.5" HDD Mounting and 2 optional LAN, 2 WiFi, black.
PCEngines Indoor Blue Enclosure for APU & ALIX2D13 is designed for ALIX2D13, APU1D, APU1D4 boards
As high-quality and modular enclosure system the Embedded BOX offers compatibility for PCEngines APU1/2/3/4 boards.
Enclosure designed for ALIX.2* boards and APU2C0. Cutouts for 3 LEDs and 1 switch in front, cutouts for DB9, 2 LAN, 3 or 2 SMA connectors, DC jack in back. Enclosure made of anodized or painted aluminum. Dimensions 168 mm wide x 157 mm deep x 30 mm high. RoHS compliant.
Enclosure designed for ALIX.2* boards. Cutouts for 3 LEDs and 1 switch in front, cutouts for DB9, 2 LAN, 3 or 2 SMA connectors, DC jack in back. Enclosure made of anodized or painted aluminum. Dimensions 168 mm wide x 157 mm deep x 30 mm high. RoHS compliant.
Enclosure designed for ALIX.2* boards. Cutouts for 3 LEDs and 1 switch in front, cutouts for DB9, 2 LAN, 3 or 2 SMA connectors, DC jack in back. Enclosure made of anodized or painted aluminum. Dimensions 168 mm wide x 157 mm deep x 30 mm high. RoHS compliant.
Aluminum Enclosure designed for WRAP.2* / ALIX.3* boards. Cutouts for 1 LAN, DC jack, 2 SMA, DB9, 3 LEDs in back.
Designed to withstand the toughest environments, the WRAP-BOX outdoor enclosure is a small, light, yet very solid wireless outdoor enclosure. The WRAP-BOX is rated NEMA-67 providing complete protection against ingress of dust as well as protection against immersion in water.
Highly recommended item to protect a ODROID-HC1.
The ODROID-C4 Black case has openings for all outputs including the GPIO port making it a great fit projects that are connected to external hardware.
Highly recommended item to protect a ODROID-HC2.
Highly recommended item to protect a ODROID-XU4.
The semi-transparent case has openings for all outputs including the GPIO port making it a great fit projects that are connected to external hardware.
Recommanded for those who wants to protect the ODROID-N2 board from dust and the elements.
This “Case Type 1” is designed for the user who needs high bandwidth network with the high capacity storages for the high performance computing system.
Designed to withstand the toughest environments, the WRAP-BOX outdoor enclosure is a small, light, yet very solid wireless outdoor enclosure.
This “Case Type 2” is designed for the user who needs high performance network with a minimal or regular range storages.
Designed to withstand the toughest environments, the WRAP-BOX outdoor enclosure is a small, light, yet very solid wireless outdoor enclosure. The WRAP-BOX is rated NEMA-67 providing complete protection against ingress of dust as well as protection against immersion in water.
This “Case Type 3” is designed for the user who needs high bandwidth network with mid-range storages.
Discontinued
Every single IoT project includes different types of inputs and outputs, physically. With infinite numbers of possibilities, developers need their own custom machined enclosures. That enclosure brings flexibility to add/remove cable interfaces to your project in seconds. IP54 rated lid and grommets enable your project’s environmental robustness. Projects against dust, rain, and snow. It has a tough clear polycarbonate lid, built-in gasket seal, mounting earing, and four different grommets for different types of cables.
This Odroid Case Type 5 is made for the user who needs high bandwidth network with high capacity storages for the strong performing computing system.
It is a good plastic box for Raspberry Pi, which can protect it with one of these snazzy plastic enclosures?. These cases protect the Raspberry Pi from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together.
This “Case Type 6” is designed for the user who needs high performance network with a minimal or regular range storages.
Discontinued
It is a good plastic box for Raspberry Pi, which can protect it with one of these snazzy plastic enclosures?. These cases protect the Raspberry Pi from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together. It has windows on four sides for direct access to components.
This “Case Type 7” is designed for the user who needs high bandwidth network with mid-range storages.
It is a good plastic box for Raspberry Pi, which can protect it with one of these snazzy plastic enclosures?. These cases protect the Raspberry Pi from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together.
VuShell is a laser cut acrylic enclosure for the ODROID-VU7Plus. You can make your own desktop PC with the fancy VuShell. VuShell allows for two different viewing angles.
Enclosure designed for Raspberry-PI boards in rectangular version and consists of two identical halves that fit togather. It has windows on four sides for direct access to components. Well suited for users who frequently connect and disconnect from the PCB ports. Excellent heat dissipation capabilities. Easy access to the GPIO Headers (auxiliary 26 pins).
The semi-transparent case has openings for all outputs including the GPIO port making it a great fit projects that are connected to external hardware.
Enclosure designed for Raspberry-PI boards in rectangular version and consists of two identical halves that fit togather. It has windows on four sides for direct access to components. Well suited for users who frequently connect and disconnect from the PCB ports.
This is our very modular Raspberry Pi 4 injection moulded case - a fully customisable and adaptable modular unit aimed to suit a range of Raspberry Pi applications.
Red Khadas DIY Case for custom projects. Fully Compatible with Khadas VIM2.
Hardkernel recommanded enclosure for Odroid-U3 system board.
A sleek and cool blue metal case is an available option to protect your ODROID-M1 board.
The metal cover is made with aluminum extrusion that has an abrasive blasted surface texture and anodized blue finish. It can be securely docked to the ODROID-M1 heatsink frame via sliding slot. The front and rear side covers were made with gold plated PCBs.
Khadas Trasparent case without metal plate. Suitable for projects where enclosure has to attach or mount.
This metal heatsink case is specially designed for cooling down your Raspberry Pi 4B!
Purple Khadas DIY Case for custom projects. Give some weight to your Khadas board.
User this heavy enclosure to give your project a better look.
Designed to keep your Raspberry Pi 4 Model B cool, our case features 'hex' ventilation paired with a 5V cooling fan (included). Also includes a set of rubber feet!
By using this Metal Plate, you can give Khadas box some weight this way issue of low weight device placing fixes. This is optional but good to have, doesn't let move your Khadas box due to cable stretch.
The perfect home for your new Raspberry Pi 4. We will ensure our case is adjusted to fit the latest Raspberry Pi specifications.
Note "Only tested for the Raspberry Pi 4B"
Does not support Pi 3B+, 3B, or 2