This DP to HDMI adapter cable provides an easy way to turn a DisplayPort into a HDMI Port for your computer.
There are 38 products.
The connector heads measure 0.51" x 0.36" x 0.25" (13.0 x 9.3 x 6.3 mm) on the USB micro B end and 0.51" x 0.55" x 0.25" (13.0 x 13.8 x 6.3 mm) on the USB A end.
Raspberry Pi® computer you just got has a row of 2x13 pin headers soldered on - those are the GPIO (general purpose input/output) pins and for those of us who like to hack electronics they are where the real fun is. By programming the Pi, you can twiddle those pins high or low, send and receive I2C and SPI data, and access the 3V and 5V power rails.
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
Give your 40 pin, 0.5mm pitch, devices a stretch with this extension board.
USB specification revision 2.0 & 1.1 compliant
Support RS232 serial interface (DB9 pins)
Support over 1Mbps data transfer rate
Support remote wake-up and power management
Support Windows98/SE/ME/2000/XP/Vista/Windows 7 (32/64bit) and Mac OS9.0/OSX/Linux
Suitable for PDA and Modem
Driver CD included
The cable has enough cross-links between the signals to transmit and receive data with accuracy. Moreover, this is used mostly to transfer files from one computer to another.Null Modem Cable (DB9F - DB9F) is a cross linked cable.
Silicon Labs CP2104 controller, which has proven reliable in our experience. Unlike competitors, our adapter has the DB9F female connector with null-modem pin-out to allow for direct connection to Alix/APU system boards without a DB9 null modem cable
PC Engines SATA data with Power cable for APU Boards has three connectors, , data / power on drive end, separate SATA data and 2 pin power header for APU System board end.
PC Engines SATA data with Power cable for APU Boards has three connectors, , data / power on drive end, separate SATA data and 2 pin power header for APU System board end.
44-Pin IDE Female to Female Cable is short, but very efficient, and is easy to enclose.
This is a 44 pin cable with 2 mm pitch connectors for 2.5" HDDs. Shortened version with opposed connectors for easier mounting inside case1c / case1d enclosures
Mouse Keyboard I/O Splitter Cable Adapter is suitable for laptops, PCs or even ALIX 1C boards.
USB host port on your PC or Smartphone chargers can supply the power to ODROID-C via this cable.
DC Plug specification : Inner diameter 0.8mm and outer diameter 2.5mm
Center is positive(RED wire) and outer is negative(BLACK wire)
DC Plug specification : Inner diameter 0.8mm and outer diameter 2.5mm
Center is positive(RED wire) and outer is negative(BLACK wire)
Center is positive(RED wire) and outer is negative(BLACK wire)
Center is positive(RED wire) and outer is negative(BLACK wire)
Part for the I2S 2Watt Stereo Boom Bonnet Kit, for use with the ODROID-XU4 / XU4Q.
Part for the I2S 2Watt Stereo Boom Bonnet Kit, for use with the ODROID C1+ / C2.
SATA cables are perfect for system builds with tight fitting environments with ODROID-H2 Case Type 1, Type 3 and Type 4 to connect a SATA HDD/SSD storage. Utilising compact stackable connectors, this flexible 200mm cables are neat and manageable.
3.5mm male plug to 3 RCA female adapter cable(Red, White, Yellow) connectors for Audio and/or Video devices
Connects HDMI devices to HDMI devices
Resolution up to 1080p
HDMI spec : V1.4
RoHS compliant
Connects HDMI devices to DVI devices
Resolution up to 1080p
HDMI spec : V1.4
RoHS compliant
Connects HDMI devices to HDMI devices
Resolution up to 1080p
HDMI spec : V1.4
RoHS compliant
Cable constructed using the high quality material for best contact connection between HDMI equipments.
Fully supports HDMI ethernet channel and HDMI 3D features.
Extend the reach of your USB 3.0 devices with CorpShadow's USB 3.0 compliant usb extension cables. Backward compatible with previous versions of USB but speed tested to be able to support the newest standard as well.
USB-C cable (male-to-male), supporting both USB-3.0 data and USB power delivery from 5-20V.
A super handy switch cable for your Raspberry Pi 4 Model B , removing the need to pull the USB-C connector out of your Raspberry Pi (or mess around with sockets/plugs) every time you want to power up/down.
Separated pin plugs, this cable is ideal for powering and connecting up to the debug/login console on the Raspberry Pi or BeagleBone Black. Connect the pins as shown to power the Pi or BBB and establish the RX/TX link.
A single native (non-USB) SATA 3.0 port on the ODROID-M1 is provided for use with a 2.5inch HDD or SSD NAND Memory storage device. This SATA interface delivers near 500MB/s of sequential access. The SATA mount kit contains a SATA Data cable, a SATA Power cable, and a mount plate with some support screws. However, since the SATA power port doesn’t have a 12Volt power rail, a separated external 12Volt SATA power supply is required to use a 3.5inch HDD.