ODROID-H2 Case Type 2

This “Case Type 2” is designed for the user who needs high performance network with a minimal or regular range storages. Basically, this is the fanless design and the heated air from a processor can be blow out through the 92mm cooling fan hole on top of this enclosure. But you also can install a 92x92mm standard PC cooling fan (optional) at the hole if the decent power for the fan is supplied.
.

Supported storages:

On-board eMMC 5.1 module

On-board M.2 NVMe (NGFF-2280)

• Any SATA storage device can’t be installed in the Type 2 cases.

• The disk drive mounting screws (M3x6mm) are included in the package.

• The power and reset switches are accessible through the hole at the front

• Optional power on/off switch (diameter 16mm) can be installed at the front panel

• 128 (L) x 132 (W) x 63 (H) mm
  .
  

Package contents:

A. Back panel

B. Front panel

C. Left panel

D. Right panel

E. Top panel

F. Bottom panel

G. 1 x 92mm Stainless Cooling Fan Grill

H. 4 x 40mm (F) PCB Supports

I. 4 x 15mm (M) PCB Supports

J. 8 x 6mm M3 Truss Head Bolts

K. 4 x M5 Nuts

L. 4 x M5 Truss Head Bolts

M. 4 x Rubber Feet (Round / Clear)

.
Optional accessory

• LED Power Button
• 16Port I2C GPIO Board
• VESA Mount Kit
• 92x92x25mm DC 5V Cooling Fan