We launched ODROID-M1 about 20 months ago and have supplied it to many B2B and B2C customers. Feedback from many customers requested a lower price, more GPIO ports, lower power consumption, a slimmer form factor, and a variety of practical peripherals.
This ODROID-HC1 case is a highly recommended accessory to protect your ODROID-HC1 from physical damage and dust. The compact and durable design ensures a snug fit for the single-board computer and offers easy access to all ports and interfaces. The case also features a cooling fan and heatsink for optimal thermal management.
The 5V/2A Power Adapter (US) is a reliable power source for your Odroid devices that require 5V input voltage. With its compact size and US plug design, it's a convenient accessory to keep your devices powered up and running smoothly. The adapter has a 2A output current, providing stable power to your devices.
Easier and faster way to flash your OS image into the eMMC Module. With this unit, you will not need a separate USB card reader. Just attach your eMMC module directly to your PC/Mac via this writer board. The module writer supports various speeds and capacities of eMMC modules and provides a faster write speed than its predecessor, the USB2.0 eMMC Module...
An eMMC module is a small, high-speed storage device designed for ODROID systems. With a capacity ranging from 8GB to 128GB, it provides reliable and fast storage for operating systems, applications, and data. The eMMC module is a convenient alternative to using a microSD card for storage, offering improved performance and longevity.
*Note: We do not...
The 5V/2A Power Adapter (US) is a reliable and efficient power supply for various electronic devices that require a 5V DC input. Its compact and lightweight design makes it easy to carry around, while its 2A output ensures stable and consistent power delivery. The adapter is UL listed for safe and reliable operation.
RTC backup battery Lithium primary battery to back up the RTC on XU board. This battery can keep the RTC running up to 5 years without external power supply.
The ODROID-M2 is a striking high-performance single-board computer (SBC) that significantly surpasses the M1 series. Building on the success of the ODROID-M1 and M1S, which have been widely adopted in embedded systems, the ODROID-M2 meets the growing demand for higher computing power in industrial applications. Equipped with advanced processors and...
This MIPI camera kit has an OV5647 sensor chip which can capture up to 5 Mpixel images and 720p/30fps video streaming. You can get reasonably good imaging whether it is in the daytime or at night thanks to the automatically switchable IR-Cut filter and two IR Lights. Realtime image inputs from the MIPI-CSI port can be widely used for Machine-Learning...
SmartPower 3 is an intelligent power switch designed for ODROID boards and other SBCs. It provides a safe and efficient way to turn on and off your device, as well as monitor the power usage and temperature in real-time. With its compact size and easy-to-use interface, SmartPower 3 is an essential tool for any ODROID project.
The 5V/4A Power Adapter (EU) is a reliable and efficient power supply for your ODROID board or other electronic devices that require a 5V DC power input. With its European plug design and 4A current output, this adapter provides stable and safe power delivery, making it an excellent choice for your electronics projects.
ODROID-C2/C1+ cases come in a variety of sizes and styles to fit different needs. The semi-transparent case offers easy access to all outputs, including the GPIO port, making it ideal for projects that require connection to external hardware. The durable construction provides reliable protection against physical damage and dust, keeping your ODROID-C2/C1+...
ODROID-N2+ cases are designed to provide reliable protection and easy access to all ports and interfaces of the ODROID-N2+ single-board computer. The cases are available in various sizes and styles to suit different needs, and feature a durable construction that can withstand physical damage and dust. They are a great accessory for anyone looking to keep...
The eMMC Module Reader is a versatile and reliable tool that simplifies accessing data on eMMC storage modules. Its USB connectivity and compatibility with various operating systems enable effortless reading and writing of data on the module. With its compact, portable design, it's perfect for professionals working with eMMC modules. Its durability and...
The 5V/6A Power Adapter (US) is a high-performance adapter designed to power a range of ODROID boards and accessories. With an output of 30 watts, this adapter provides a stable and reliable power source, while its compact size and convenient design make it ideal for use in a variety of settings.
The ODROID-H2 Case Type 1 is specifically designed for users who require high bandwidth networking and large storage capacities for their high-performance computing systems. The case features a durable construction and provides easy access to all ports and interfaces, allowing for convenient connectivity and customization. It is the perfect accessory to...
The 12V/2A Power Adapter (US) is a compact and reliable power supply for ODROID boards and other electronics with 12V input power requirements. It provides stable power with overvoltage and overcurrent protection, and its detachable cable makes it easy to store and use. A convenient accessory for your ODROID projects.
The ODROID-H2 Case Type 2 is a perfect fit for users who require high-performance networking and minimal to regular storage capacities. Its durable construction and easy access to all ports and interfaces ensure optimal connectivity and customization. It is a great accessory to protect and enhance the performance of your ODROID-H2 board.
The 15V/4A Power Adapter (US) is a high-quality power supply designed for ODROID boards and other electronics requiring 15V input power. It provides stable and reliable power with overvoltage and overcurrent protection. The compact size and detachable cable make it a convenient accessory for your ODROID projects.
Uninterrupted Power Supply is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails. The on-battery runtime of most uninterruptible power sources is relatively short but sufficient to start a standby power source or properly shut down the ODROID.
A single native (non-USB) SATA 3.0 port on the ODROID-M1 is provided for use with a 2.5inch HDD or SSD NAND Memory storage device. This SATA interface delivers near 500MB/s of sequential access. The SATA mount kit contains a SATA Data cable, a SATA Power cable, and a mount plate with some support screws. However, since the SATA power port doesn’t have a...
SmartPower 3 is an intelligent power switch designed for ODROID boards and other SBCs. It provides a safe and efficient way to turn on and off your device, as well as monitor the power usage and temperature in real-time. With its compact size and easy-to-use interface, SmartPower 3 is an essential tool for any ODROID project.
The UPS2 for C1 is designed specifically for the ODROID-C1. Uninterrupted Power Supply is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails. The on-battery runtime of most uninterruptible power sources is relatively short but sufficient to start a standby power source or properly shut...
The 19V/7A Power Supply is a high-performance and reliable power supply designed to meet the power requirements of high-end electronic devices, including ODROID boards. It provides stable power with overvoltage and overcurrent protection, ensuring safe and efficient operation. Its compact and durable design makes it an ideal choice for your power-hungry...
The sleek design of the Case Type 2 complements the modern aesthetic of the ODROID-H2 board. The ODROID-H2 Case Type 4 is ideal for users who require high-bandwidth networking with mid-range storage. Its fanless design allows for the dissipation of heated air from the processor and drives, while two 92mm holes on top provide additional ventilation.
how much words is this: The ODROID-H2 Case Type 5 is designed for users who require high-bandwidth networking and high-capacity storage for a high-performing computing system. Its durable construction and easy access to all ports ensure optimal connectivity and customization, while the fanless design dissipates heat effectively for reliable operation....
The ODROID-H2 Case Type 7 is designed for users who require high-bandwidth networking with mid-range storage capacity. Its fanless design and top-mounted ventilation holes provide efficient heat dissipation, while easy access to all ports allows for optimal connectivity and customization. This case is an ideal accessory to protect and enhance the...
The VUSHELL for VU7 in Smokey Blue/White is a stylish protective case designed specifically for the VU7 7-inch display. It offers a perfect fit, shielding your device from dust, scratches, and impacts. With its attractive color combination and durable construction, it adds both style and protection to your VU7 display.
The ODROID-C1 case is perfect for projects that require external hardware connections, with its semi-transparent design allowing for easy access to all outputs including the GPIO port. This case provides protection and customization options for your ODROID-C1 board while maintaining optimal connectivity, making it an ideal choice for DIY enthusiasts.
The ODROID-GO Super is a portable gaming console powered by the ESP32-WROVER microcontroller. It features a 3.5-inch IPS LCD display, Wi-Fi, Bluetooth, and a rechargeable battery. The console comes with pre-installed emulators and games, and its open-source nature allows for easy customization and game development.
The Odroid-U3 case is a sleek and durable enclosure designed to protect and enhance the performance of your Odroid-U3 board. Its compact size and easy access to all ports ensure optimal connectivity and customization, while its fanless design dissipates heat effectively for reliable operation. The case is a great accessory for your Odroid-U3 board.
A sleek and cool blue/oliveGray metal case is an available option to protect your ODROID-M1 board. The metal cover is made with aluminum extrusion that has an abrasive blasted surface texture and anodized blue/oliveGray finish. It can be securely docked to the ODROID-M1 heatsink frame via sliding slot.
Consists of ODROID-HC4 board, a case made of a rigid PCB that can mount two 3.5-inch HDDs horizontally, cooling fan, cables and bolts. It’s your own network storage device that you can enjoy creating yourself, and the HC4’s Petitboot function and various latest OS support can be used without any changes. Please note that this product cannot mount any...
The ODROID-GO-ULTRA is a portable gaming console that runs on the ESP32-WROVER microcontroller and features a 5-inch IPS LCD display, Wi-Fi, Bluetooth, and a rechargeable battery. It comes with pre-installed emulators and games, and its open-source design allows for easy customization and game development.
The Aura Black/Clear White Cases buttons kit for ODROID-GO Advance Black Edition is an excellent accessory that enhances the look and feel of your ODROID-GO Advance Black Edition. The kit comes with black and white buttons that are easy to install and offer a comfortable gaming experience. The durable and stylish Aura cases offer maximum protection to...
Showing 1-50 of 151 item(s)
By using this site, you agree to cookies for a better experience. See Privacy Policy.
