The Indoor Enclosure for APU4 - 4 LAN is a durable and sleek housing solution designed for APU4 boards. It features cutouts for 3 LEDs, 1 switch, DB9, 2 to 4 LAN, and 3 or 2 SMA connectors, with a DC jack in the back. The enclosure is made of anodized or painted aluminum and is RoHS compliant, measuring 168 mm wide x 157 mm deep x 30 mm high.
PC Engines Passive POE Injector provides power and data to Power Over Ethernet compatible devices. It is recommended to use 18V power adapter to minimize cable losses. This POE is compatible with ALIX board or any POE enabled device.
Mikrotik RouterOS is ultra picky about CF controllers, not recommended.
Please note that these cards support DMA, must disable DMA when used on WRAP.1C / .1D / .2C boards.
The Red Indoor Enclosure for APU/ALIX - 3 LAN is a high-quality enclosure designed for ALIX/APU boards. It features cutouts for 3 LEDs, 1 switch, DB9, 2 LAN, and 2 SMA connectors, as well as a DC jack in the back. The enclosure is made of anodized or painted aluminum and is RoHS compliant. Its dimensions are 168 mm wide x 157 mm deep x 30 mm high....
The APU3D4 System Board is a high-performance, small-form-factor board designed for network and communication applications. It features an AMD Embedded G series processor, 3 Gigabit Ethernet channels, and 3 miniPCI express slots for expansion. With 4 GB of DDR3-1333 DRAM, it consumes about 6 to 12W depending on CPU load.
*Heat Spreader Kit for APU Board...
PC Engines IDE Straight Conn to CompactFlash Adapter (IDE Straight Conn) is a perfect replacement for PC hard disk drives, floppy power connector and 40 pin IDE connector.
It is a high performance mini-ITX embedded board with AMD GX Series (Quad-Core) CPU 1GHz with 64 bit and 2MB L2 cache featuring 4 Intel i211AT & 4GB DDR3-1333 DRAM.
*Heat Spreader Kit for APU Board is included
APU4D4 Pre-Installed Systems
Solid state replacement for 2.5" hard disk drives, 44 pin IDE connector. This version includes mounting hole locations for regular and legacy 2.5" hard drives.
Enclosure designed for ALIX.2* boards and APU2C0. Cutouts for 3 LEDs and 1 switch in front, cutouts for DB9, 2 LAN, 3 or 2 SMA connectors, DC jack in back. Enclosure made of anodized or painted aluminum. Dimensions 168 mm wide x 157 mm deep x 30 mm high. RoHS compliant.
Enclosure designed for ALIX.2* boards. Cutouts for 3 LEDs and 1 switch in front, cutouts for DB9, 2 LAN, 3 or 2 SMA connectors, DC jack in back. Enclosure made of anodized or painted aluminum. Dimensions 168 mm wide x 157 mm deep x 30 mm high. RoHS compliant.
ALIX2D13 is a compact system board designed for embedded applications. Powered by a 500 MHz AMD Geode LX800 processor and 256 MB DDR DRAM, it supports various operating systems including Linux, FreeBSD, NetBSD, OpenBSD, FreeDOS, and more. With 3 Ethernet channels, a compact flash socket, and a 44 pin IDE header, it's a versatile choice for network...
Enclosure designed for ALIX.2* boards. Cutouts for 3 LEDs and 1 switch in front, cutouts for DB9, 2 LAN, 3 or 2 SMA connectors, DC jack in back. Enclosure made of anodized or painted aluminum. Dimensions 168 mm wide x 157 mm deep x 30 mm high. RoHS compliant.
The ALIX2D2 is a compact system board designed for embedded applications. Powered by a 500 MHz AMD Geode LX800 processor and 256 MB DDR DRAM, it features two Ethernet channels, dual USB ports, a DB9 serial port, and a CompactFlash socket with a 44 pin IDE header for storage. The board also has two miniPCI slots and LPC bus for expansion, and can be...
PC Engines N Female Protective Cap is watertight enough for covering unused ports of N female connectors. Suitable for use with PIGNF6. Does not have a rubber seal.
PC Engines PCI Post Code Display - Motherboard Diagnostic Display is used to write diagnostic codes on PC BOIS. Dual digit LED display indicates codes and power supply rails.
PC Engines MMCX to N-Female Bulkhead Pigtail is RoHS certified. Engineered for peak performance upto 6GHz operations and usable for any mini-PCI card with MMCX connector.
2.4 GHz outdoor Omni Directional antenna is a versatile and economical choice for engineers and technicians. This antenna provides the best performance with minimum loss.
PC Engines Remote Display Kit for POST4D connects with POST4D PCI POST card. Its 20 inch cable allows display to be placed in a more suitable location.
The cable has enough cross-links between the signals to transmit and receive data with accuracy. Moreover, this is used mostly to transfer files from one computer to another.Null Modem Cable (DB9F - DB9F) is a cross linked cable.
Silicon Labs CP2104 controller, which has proven reliable in our experience. Unlike competitors, our adapter has the DB9F female connector with null-modem pin-out to allow for direct connection to Alix/APU system boards without a DB9 null modem cable
This is a 44 pin cable with 2 mm pitch connectors for 2.5" HDDs. Shortened version with opposed connectors for easier mounting inside case1c / case1d enclosures
Winstron DCMA82 miniPCI wireless network adapter offers high output power of 400mW, extending the range of embedded devices much further. Combined with excellent receiver sensitivity, Winstron DCMA82-26dBm is the miniPCI of choice for long distance links, or those where signal levels are reduced due to minor obstructions such as tress or buildings.
Showing 1-45 of 45 item(s)
By using this site, you agree to cookies for a better experience. See Privacy Policy.
