Availability: 9 In Stock
High quality stable and low noise power supply for ODROID-HC2, ODROID-C4 and ODROID-N2+
M1 SATA mount and cable kit
Reference: ODM1SMKIT
US$13.70
A single native (non-USB) SATA 3.0 port on the ODROID-M1 is provided for use with a 2.5inch HDD or SSD NAND Memory storage device. This SATA interface delivers near 500MB/s of sequential access. The SATA mount kit contains a SATA Data cable, a SATA Power cable, and a mount plate with some support screws. However, since the SATA power port doesn’t have a 12Volt power rail, a separated external 12Volt SATA power supply is required to use a 3.5inch HDD.
A single native (non-USB) SATA 3.0 port on the ODROID-M1 is provided for use with a 2.5inch HDD or SSD NAND Memory storage device. This SATA interface delivers near 500MB/s of sequential access. The SATA mount kit contains a SATA Data cable, a SATA Power cable, and a mount plate with some support screws. However, since the SATA power port doesn’t have a 12Volt power rail, a separated external 12Volt SATA power supply is required to use a 3.5inch HDD.
Assembly Guide
ODM1SMKIT
A single native (non-USB) SATA 3.0 port on the ODROID-M1 is provided for use with a 2.5inch HDD or SSD NAND Memory storage device. This SATA interface delivers near 500MB/s of sequential access. The SATA mount kit contains a SATA Data cable, a SATA Power cable, and a mount plate with some support screws. However, since the SATA power port doesn’t have a 12Volt power rail, a separated external 12Volt SATA power supply is required to use a 3.5inch HDD.
You might also like
Availability: 1 In Stock
A sleek and cool blue metal case is an available option to protect your ODROID-M1 board.
The metal cover is made with aluminum extrusion that has an abrasive blasted surface texture and anodized blue finish. It can be securely docked to the ODROID-M1 heatsink frame via sliding slot. The front and rear side covers were made with gold plated PCBs.
Availability: 3 In Stock
This MIPI camera kit has an OV5647 sensor chip which can capture up to 5 Mpixel images and 720p/30fps video streaming. You can get reasonably good imaging whether it is in the daytime or at night thanks to the automatically switchable IR-Cut filter and two IR Lights. Realtime image inputs from the MIPI-CSI port can be widely used for Machine-Learning applications.
Availability: 2 In Stock
The four-lane MIPI-DSI port can be directly connected to an LCD panel. An 8inch 800×1280 wide viewing angle LCD and the capacitive multi-touch screen are pre-assembled.
16 other products in the same category:
Availability: 18 In Stock
You're probably itching to make some fun embedded computer projects with ODROID-C2 or ODROID-C1+.
Availability: 5 In Stock
The ODROID-C4 Black case has openings for all outputs including the GPIO port making it a great fit projects that are connected to external hardware.
Availability: 2 In Stock
The low-cost variant of our most popular and powerful ARM SBC ODROID-N2+.
Availability: 66 In Stock
Ideal for electronics projects, phone or tablets.
Availability: 8 In Stock
Highly recommended item to protect a ODROID-XU4.
Availability: 1 In Stock
If you don’t like the simple toaster design of the original ODROID-HC4, you may be interested in this transformation kit!
Availability: 3 In Stock
VuShell is a laser cut acrylic enclosure for the ODROID-VU7Plus. You can make your own desktop PC with the fancy VuShell. VuShell allows for two different viewing angles.
Availability: 2 In Stock
Easy way to deploy power supply that collects voltage, current and power of the system.
Availability: 2 In Stock
This is a single LCD module as a spare part that we’ve put into the ODROID-GO kit.
The display has 320×240 pixels and the communication interface is SPI.
Availability: Out of stock
This “Case Type 6” is designed for the user who needs high performance network with a minimal or regular range storages.
Discontinued
Availability: 10 In Stock
USB host port on your PC or Smartphone chargers can supply the power to ODROID-C via this cable.
