- Embedded Systems
- Ready Systems addremove
- IoT addremove
- VoIP addremove
- Wireless addremove
-
Components
add remove
- STEM Education
- Combo Kits
- Services
- Support
- Contact Us
WiFi Module 5A
Reference: ODWM5A
IEEE 802.11ac/a/b/g/n WLAN module with on-board 2.4Ghz and 5.8Ghz Dual band antenna.
Please update your OS to the latest version if it doesn’t work.
– Realtek RTL8811AU chipset ( USB ID = 0bda:a811 )
– Dual-Band 11ac 1×1 with 64/128/152 bit WEP, WPA/WPA-PSK,WPA2/WPA2-PSK securities
– Frequency Range: 2.4-2.483GHz ; 5.725~5.825GHz
– Support WLAN Standards: IEEE802.11ac/a/b/g/n
– Transmission Speed : ~200 Mbps
– USB 2.0 High-speed
– Antenna Gain: 2dBi
– Dimension : 36 x 19 x 9 mm
– LED for WiFi Link Activity
– Frequency Range: 2.4-2.483GHz ; 5.725~5.825GHz
– Dimension : 36 x 19 x 9 mm
– Weight : 5 g
Data sheet
- Board Category
- ODROID-C0
ODROID-C1+
ODROID-C2
ODROID-C4
ODROID-GO
ODROID-H2+
ODROID-HC
ODROID-N2+
ODROID-XU4 - Return Warranty
- Standard 30 Days
- Manufacturer Warranty
- No Returns

IEEE 802.11ac/a/b/g/n WLAN module with on-board 2.4Ghz and 5.8Ghz Dual band antenna.
16 other products in the same category:
This “Case Type 1” is designed for the user who needs high bandwidth network with the high capacity storages for the high performance computing system.
Speaker : 0.5Watt 8Ω Mono speaker
Joystick : Analog Joystick
Ideal product for your custom projects with 5-inch multi-touch screen for ODROID gives users ability to create all-in-one. A great choice for projects such as tablets, game console and embedded systems.
This is a spare board for ODROID-GO Advance Black Edition. This is NOT compatible with the original ODROID-GO Advance.
This “Case Type 2” is designed for the user who needs high performance network with a minimal or regular range storages.
The HiFi Shield Plus provides both stereo RCA connectors to connect to external amplifiers and other audio equipment. Via TI’s high-end PCM5242 DAC chip(known as Burr-Brown), it supports 16, 24, 32 bit audio formats with minimal THD+N ratio (0.002%) and ideal dynamics (114dB+), plus amazing sampling rates of 384kHz
Pre-installed Android version.
This board contains a USB3.0 to SATA3 controller (JMicron JMS578) allowing interfacing of a single 2.5" SATA HDD/SDD
Part for the I2S 2Watt Stereo Boom Bonnet Kit, for use with the ODROID C1+ / C2.
A single native (non-USB) SATA 3.0 port on the ODROID-M1 is provided for use with a 2.5inch HDD or SSD NAND Memory storage device. This SATA interface delivers near 500MB/s of sequential access. The SATA mount kit contains a SATA Data cable, a SATA Power cable, and a mount plate with some support screws. However, since the SATA power port doesn’t have a 12Volt power rail, a separated external 12Volt SATA power supply is required to use a 3.5inch HDD.
Note: Input voltage should be no more than rated voltage,or the module will be burnt
The fan motor speed is controlled by CPU temperature proportionally
Lithium Polymer rechargeable cell with a protection circuit.