IDE to CompactFlash Adapter
Solid state replacement for 2.5" hard disk drives, 44 pin IDE connector. This version includes mounting hole locations for regular and legacy 2.5" hard drives.
Solid state replacement for 2.5" hard disk drives, 44 pin IDE connector. This version includes mounting hole locations for regular and legacy 2.5" hard drives. Board is configured as master, remove R2 for slave. Supports IDE DMA. Popular for hard disk replacement in voice mail systems etc.
44 pin IDE connector
IDE to CompactFlash adapter
No Power Connector
Standard 30 Days
1 Year Limited Warranty
16 other products in the same category:
26 In Stock
Aluminum Enclosure designed for WRAP.2* / ALIX.3* boards. Cutouts for 1 LAN, DC jack, 2 SMA, DB9, 3 LEDs in back.
13 In Stock
PCEngines Indoor Red Enclosure for APU & ALIX2D13 is designed for Following boards
105 In Stock
Compact size AC adapter, saves space on power strips. Input voltage 100-240 V AC, 47-63 Hz. Output voltage 12 V DC, maximum current 2.0A. High efficiency. 2.5 mm jack, center positive.
13 In Stock
PCEngines Indoor Red Enclosure is designed for Following boards.
ALIX2D13, APU1, APU2 and APU3 models.
Supports SATA Interface rate of 6Gb/s
Ultra high-performance and low power consumption
Supports dynamic power management and SMART
TRIM Command Supported
32 In Stock
It is a high performance mini-ITX embedded board with AMD GX Series (Quad-Core) CPU 1GHz with 64 bit and 2MB L2 cache featuring 4 Intel i211AT & 4GB DDR3-1333 DRAM.
APU4D4 Pre-Installed Systems
The IP based Power Switch is a simple product that automatically power-cycles any device when internet connectivity is lost or you want to do it manually. This is one of the best power solution for remote locations where you have to send tech only for power cycle.
Mouse Keyboard I/O Splitter Cable Adapter is suitable for laptops, PCs or even ALIX 1C boards.
• Mikrotik RouterOS is ultra picky about CF controllers, not recommended. • Please note that these cards support DMA, must disable DMA when used on WRAP.1C / .1D / .2C boards.
Exact specifications as per PCEngine's recommendations. Suitable for all ALIX boards other than ALIX.1D/1E,
Switching adapter with US plug, with FCC. ROHS and CEC compliant
53 In Stock
PCEngines Indoor Blue Enclosure for APU & ALIX2D13 is designed for ALIX2D13, APU1D, APU1D4 boards
12 In Stock
The LPC module will override the on-board flash, which could be blank or corrupted on PCEngines APU Boards.
10 In Stock
PC Engines Remote Display Kit for POST4D connects with POST4D PCI POST card. Its 20 inch cable allows display to be placed in a more suitable location.
10 In Stock
PC Engines IDE Straight Conn to CompactFlash Adapter (IDE Straight Conn) is a perfect replacement for PC hard disk drives, floppy power connector and 40 pin IDE connector.
Small Footprint with High Power Density
Meets EMS EN50082-2/EN61000-6-2 Heavy Industry Level (35~150 W) Withstands 300 VAC Surge Input for 5 Seconds
Out of stock
The APU1D4 Platform is the alternate next generation of low cost Alix series (Alix.2D13 & Alix.6F2) from PC Engines. It is a high performance mini-ITX embedded board with AMD G Series (Dual-Core) CPU 1GHz with 64 bit and 512MB L2 cache featuring 3 Realtek Gigabit Ethernet & DDR3-1066 DRAM..
Product added to compare.