Power
US$17.53
It is a power adapter specifically designed for UP7000, UP 4000, UPS V2, and UPC Plus single-board computers. It provides 12 volts at 5 amps, delivering 60 watts of power. This power supply ensures these boards receive the stable and adequate power required for their operation.
Note that the power cord is not included and must be purchased separately.
US$18.00
The 12v 5Amp power adapter is for the Boingfire BFN Series boards, ensuring optimal performance and compatibility. It is crafted with precision, resulting in minimal power loss, ensuring energy-efficient and consistent power delivery. Built to last, the adapter is shielded with robust materials, minimizing wear and tear. As a testament to its reliability...
US$9.95
The 12v 2Amp power adapter is for the Boingfire BFN4 Series boards, ensuring optimal performance and compatibility. It is crafted with precision, resulting in minimal power loss, ensuring energy-efficient and consistent power delivery. Built to last, the adapter is shielded with robust materials, minimizing wear and tear. As a testament to its reliability...
US$99.90
The IP based Power Switch is a simple product that automatically power-cycles any device when internet connectivity is lost or you want to do it manually. This is one of the best power solution for remote locations where you have to send tech only for power cycle.
US$8.95
Raspberry pi best value power supply which will give you actual 5V after complete boot up. Ideal for general purpose as well, like any device with micro-USB
US$14.95
Power socket for general purpose or to use with Casedualboard2.
US$69.99
The IP based Power Switch is a simple product that automatically power-cycles any device when internet connectivity is lost or you want to do it manually. This is one of the best power solution for remote locations where you have to send tech only for power cycle.
US$25.00
Small Footprint with High Power Density, Meets EMS EN50082-2/EN61000-6-2 Heavy Industry Level (35~150 W) Withstands 300 VAC Surge Input for 5 Seconds
US$8.95
100% full load burn-in testPass LPSProtections: Short circuit / Overload / Over voltage / Over temperatureClass II power (without earth pin)2 pole USA plug
US$3.95
PC Engines Passive POE Injector provides power and data to Power Over Ethernet compatible devices. It is recommended to use 18V power adapter to minimize cable losses. This POE is compatible with ALIX board or any POE enabled device.
US$66.15
It is a power adapter designed for UP Squared i12 single-board computer. It provides 12 volts at 10 amps, delivering 120 watts of power. This power supply ensures the UP Squared i12 board receives stable and sufficient power for its high-performance requirements.
Note that the power cord is not included and must be purchased separately.
US$8.95
Blue illuminated Power Button with pre-assembled jumper wires.
US$20.00
Small Footprint with High Power Density
Meets EMS EN50082-2/EN61000-6-2 Heavy Industry Level (35~150 W)
Withstands 300 VAC Surge Input for 5 Seconds
US$3.25
The 5V/2A Power Adapter (US) is a reliable power source for your Odroid devices that require 5V input voltage. With its compact size and US plug design, it's a convenient accessory to keep your devices powered up and running smoothly. The adapter has a 2A output current, providing stable power to your devices.
US$4.25
The connector heads measure 0.51" x 0.36" x 0.25" (13.0 x 9.3 x 6.3 mm) on the USB micro B end and 0.51" x 0.55" x 0.25" (13.0 x 13.8 x 6.3 mm) on the USB A end.
US$5.25
SET contains two pieces INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet.
US$7.15
The 5V/2A Power Adapter (US) is a reliable and efficient power supply for various electronic devices that require a 5V DC input. Its compact and lightweight design makes it easy to carry around, while its 2A output ensures stable and consistent power delivery. The adapter is UL listed for safe and reliable operation.
US$4.59
RTC backup battery Lithium primary battery to back up the RTC on XU board. This battery can keep the RTC running up to 5 years without external power supply.
US$5.25
SET contains two pieces INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet
US$60.75
It is a power adapter designed for UP Squared Pro and UPX i11 single-board computers. It provides 12 volts at 8 amps, delivering 96 watts of power. This power supply ensures that the UP Squared Pro and UPX i11 boards receive the stable and sufficient power needed for their operation.
Note that the power cord is not included and must be purchased separately.
US$71.00
SmartPower 3 is an intelligent power switch designed for ODROID boards and other SBCs. It provides a safe and efficient way to turn on and off your device, as well as monitor the power usage and temperature in real-time. With its compact size and easy-to-use interface, SmartPower 3 is an essential tool for any ODROID project.
US$7.15
The 5V/4A Power Adapter (EU) is a reliable and efficient power supply for your ODROID board or other electronic devices that require a 5V DC power input. With its European plug design and 4A current output, this adapter provides stable and safe power delivery, making it an excellent choice for your electronics projects.
US$8.00
Lithium Polymer rechargeable cell with a protection circuit.
US$1.85
3 "AAA" Battery Holder With 6" Wire Leads ( Red = Positive, Black = Negative) Wire Leads
US$2.25
Note: Input voltage should be no more than rated voltage,or the module will be burnt
US$15.60
Lithium Polymer rechargeable cell with a protection circuit.
US$12.00
The 5V/6A Power Adapter (US) is a high-performance adapter designed to power a range of ODROID boards and accessories. With an output of 30 watts, this adapter provides a stable and reliable power source, while its compact size and convenient design make it ideal for use in a variety of settings.
US$0.59
Plastic Cover for DC power plug Jack Adapter Connector
US$53.95
SmartPower2 is a power-supply which has WiFi connectivity to control the voltage and switch on/off a connected device.
US$7.15
The 12V/2A Power Adapter (US) is a compact and reliable power supply for ODROID boards and other electronics with 12V input power requirements. It provides stable power with overvoltage and overcurrent protection, and its detachable cable makes it easy to store and use. A convenient accessory for your ODROID projects.
US$0.31
Type: 6.3mm female with caseWire Size (AWG): 22-16Max Current: 19 AmpWire Type: COPPERSleve Color: Transparent
US$12.22
The 15V/4A Power Adapter (US) is a high-quality power supply designed for ODROID boards and other electronics requiring 15V input power. It provides stable and reliable power with overvoltage and overcurrent protection. The compact size and detachable cable make it a convenient accessory for your ODROID projects.
US$62.00
Lithium Polymer Battery for Captain Carrier Board.
US$59.95
Uninterrupted Power Supply is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails. The on-battery runtime of most uninterruptible power sources is relatively short but sufficient to start a standby power source or properly shut down the ODROID.
US$49.90
The LattePanda UPS Hat is compatible with the LattePanda 2 Alpha, Delta, and 3 Delta pins and can be installed directly. It uses three 18650 lithium-ion batteries as UPS storage and supports power supply through TypeC PD and 5.5mm DC interfaces. When the external power supply is interrupted, the UPS Hat automatically switches to battery power, ensuring...
US$5.00
SmartPower 3 is an intelligent power switch designed for ODROID boards and other SBCs. It provides a safe and efficient way to turn on and off your device, as well as monitor the power usage and temperature in real-time. With its compact size and easy-to-use interface, SmartPower 3 is an essential tool for any ODROID project.
US$49.45
The UPS2 for C1 is designed specifically for the ODROID-C1. Uninterrupted Power Supply is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails. The on-battery runtime of most uninterruptible power sources is relatively short but sufficient to start a standby power source or properly shut...
US$0.35
Use Spade Wire fork terminal with 19" DualBoard Enclosure System for ALIX/APU Boards (CASEDUALBOARD2) and AC to DC Internal Power Supply 35W (RS-35-12).
US$32.50
The 19V/7A Power Supply is a high-performance and reliable power supply designed to meet the power requirements of high-end electronic devices, including ODROID boards. It provides stable power with overvoltage and overcurrent protection, ensuring safe and efficient operation. Its compact and durable design makes it an ideal choice for your power-hungry...
US$20.00
USB-C 24W Adapter, with USB-C power delivery. This new adapter is meant for use with Edge SBCs, as well as the new VIM3. Onboard controller negotiates the power supply needed by your SBC using the USB-C cable.
US$27.96
USB-C 30W Adapter, with USB-C power delivery. This new adapter is meant for use with VIM4 SBCs. An onboard controller negotiates the power supply needed by your SBC using the USB-C cable.
US$5.00
Use this USB-DC Power Bridge board with ODROID-XU4 to connect ODROID-VU7 or VU7 Plus
US$7.95
Compact size AC adapter, saves space on power strips. Input voltage 100-240 V AC, 47-63 Hz.
US$10.95
The ESPRESSOBin power supply is a compact size AC adapter, saves space on power strips. Input voltage 100-240 V AC, 47-63 Hz. Output voltage 12 V DC, maximum current 2.0A. High efficiency. 2.5 mm jack, center positive.
US$7.65
J18 Header Set (Pin, Plug, Cover), for PC Engines ALIX/APU Boards
US$10.95
Exact specifications as per PCEngine's recommendations. Suitable for all ALIX boards other than ALIX.1D/1E, Switching adapter with US plug, with FCC. ROHS and CEC compliant.
US$9.95
Exact specifications as per PCEngine's recommendations. Suitable for all ALIX boards other than ALIX.1D/1E, Switching adapter with US plug, with FCC. ROHS and CEC compliant
US$9.95
Exact specifications as per PCEngine's recommendations. Suitable for all ALIX boards other than ALIX.1D/1E, Switching adapter with US plug, with FCC. ROHS and CEC compliant