Lithium Polymer rechargeable cell with a protection circuit.
List of products by brand HardKernel
There are 122 products.
Easy way to deploy power supply that collects voltage, current and power of the system.
This is the only way that you can upgrade your OS in the eMMC. It is highly recommended item.
Discontinued
The ODROID H2 Net card brings 4 Additional 2.5 GbE Ethernet ports to your H2/H2+ for an incredibley low price.
You can show colorful texts and pictures via USB interface with VT100/ANSI style commands without big HDMI monitor. You can connect this tiny display to your ODROID as well as Mac, Linux PC, Windows PC even an enterprise server.
This is a single LCD module as a spare part that we’ve put into the ODROID-GO kit.
The display has 320×240 pixels and the communication interface is SPI.
Fully assembled 3.2inch display with 320x240 pixels TFT LCD and a resistive touch overlay. Just plug it on top of ODROID-C1. 2x13 tall female header is already soldered on the PCB.
Fully assembled 3.5inch display with 480×320 pixels TFT LCD and a resistive touch overlay.
Use this USB-DC Power Bridge board with ODROID-XU4 to connect ODROID-VU7 or VU7 Plus
Ideal product for your custom projects with 5-inch multi-touch screen for ODROID gives users ability to create all-in-one. A great choice for projects such as tablets, game console and embedded systems.
Real Time Clock Shield for the ODROID-C2
The four-lane MIPI-DSI port can be directly connected to an LCD panel. An 8inch 800×1280 wide viewing angle LCD and the capacitive multi-touch screen are pre-assembled.
What's new and different from the VU7+?
* AUDIO JACK: The VU7A+ (Audio) is meant to be used with sound! Plug in your own speakers or earbuds/headphones into the audio jack (3.5mm)
Lead time is 7 Days if out of stock
IEEE 802.11ac/a/b/g/n WLAN module with on-board 2.4Ghz and 5.8Ghz Dual band antenna.
Laser Acrylic enclosure for the 3.5 Inch LCD Shield.
- Connector : 1.25mm 4-pin wafer male wire
- Blue : PWM input
- Yellow : Tacho output (Frequency Generator)
- Red : DC 5V
- Black : Ground
Infrared remote controller
12 Keys function
37.9Khz Carrier Frequency
NEC standard protocol
WIFI Module #5BK uses the same chipset (Realtek RTL8821CU) as WIFI Module #5B, so it is 100% compatible. IEEE 802.11ac/a/b/g/n WLAN and Bluetooth combo module with onboard 2.4Ghz and 5.8Ghz Dual band antenna.
The fan motor speed is controlled by CPU temperature proportionally
By default XU4 board includes the cooling fan, you might need this part when you want to replace original cooling fan.
The fan motor speed is controlled by CPU temperature proportionally
CM108AH is a highly integrated single chip USB audio solution.
All essential analog modules are embedded in CM108AH, including dual DAC and headphone amplifier, ADC, microphone booster, PLL, regulator, and USB transceiver.
This heatsink might be useful for who needs the full throttled quad-core performance with ODROID-C1.
he Biscuit™ is an integrated module consisting of 3 dimensional motion sensor and Wi-Fi communication module.
Works with the ODROID-C2 / C1+. This is not compatible with the original ODROID-C1.
The HiFi Shield Plus provides both stereo RCA connectors to connect to external amplifiers and other audio equipment. Via TI’s high-end PCM5242 DAC chip(known as Burr-Brown), it supports 16, 24, 32 bit audio formats with minimal THD+N ratio (0.002%) and ideal dynamics (114dB+), plus amazing sampling rates of 384kHz
The CloudShell-2 for the ODROID-XU4 is an affordable DIY Network Attached Storage (NAS) Solution with RAID support.
The LED Matrix Shield is also great for making scrolling displays. In our example codes, we set it up so words flow from one matrix to the other.
Servo motor for custom project, use it with Odroid or any other hardware.
This board contains a USB3.0 to SATA3 controller (JMicron JMS578) allowing interfacing of a single 2.5" SATA HDD/SDD
Additional boards for DIY projects or Arduino Camp? This is a spare part for ODROID-GO kit.
The UPS2 for C1 is designed specifically for the ODROID-C1.
Uninterrupted Power Supply is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails. The on-battery runtime of most uninterruptible power sources is relatively short but sufficient to start a standby power source or properly shut down the ODROID-C1
Uninterrupted Power Supply is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails. The on-battery runtime of most uninterruptible power sources is relatively short but sufficient to start a standby power source or properly shut down the ODROID.
Compact Stero Speaker for VU7A Plus and VU5A Plus
The ROM-WT138LM(N) series are remote control receiver modules.