List of products by brand PCEngines

It is a high-performance mini-ITX embedded board with AMD GX Series (Quad-Core) CPU 1GHz with 64 bit and 2MB L2 cache featuring 4 Intel i211AT & 4GB  DDR3-1333 DRAM.

*Heat Spreader Kit for APU Board is included

APU4D4 Pre-Installed Systems

This 16GB mSATA SSD Module (Updated Firmware) is perfect for use with latest APU board. Works well for Windows XP, Windows 7, Linux and MacOS10.X.

Indoor Black/Blue/Red Enclosures for PCEngines APU4 boards.

It is a high performance mini-ITX embedded board with AMD GX Series (Quad-Core) CPU 1GHz with 64 bit and 2MB L2 cache featuring 3 Intel i211AT & DDR3-1333 DRAM with optimized for 3G/LTE Modems.

Expected in 2022

PCEngines Indoor Red Enclosure is designed for Following boards.

ALIX2D13, APU1, APU2 and APU3 models.

PCEngines Indoor Red Enclosure for APU & ALIX2D13 is designed for Following boards

APU Series 

It is a high performance mini-ITX embedded board with AMD GX Series (Quad-Core) CPU 1GHz with 64 bit and 2MB L2 cache featuring 3 Intel i211AT & DDR3-1333 DRAM with optimized for 3G/LTE Modems.

*Heat Spreader Kit for APU Board is included

It is a high performance mini-ITX embedded board with AMD GX Series (Quad-Core) CPU 1GHz with 64 bit and 2MB L2 cache featuring 4 Intel i211AT & 2GB DDR3-1333 DRAM.

*Heat Spreader Kit for APU Board is included

Pre-Installed System

PCEngines Indoor Black Enclosure designed for ALIX2D13 and APU1, APU2 and APU3 Series boards.

It is a high performance mini-ITX embedded board with AMD GX Series (Quad-Core) CPU 1GHz with 64 bit and 2MB L2 cache featuring 4 Intel i211AT & 4GB  DDR3-1333 DRAM.

*Heat Spreader Kit for APU Board is included

APU4D4 Pre-Installed Systems

It is a high performance mini-ITX embedded board with AMD GX Series (Quad-Core) CPU 1GHz with 64 bit and 2MB L2 cache featuring 3 Intel i211AT & DDR3-1333 DRAM.

*Heat Spreader Kit for APU Board is included

The APU2E4 Platform is the alternate next generation of low-cost APU series (APU1D4) from PCEngines. 

*Heat Spreader Kit for APU Board is included

The APU1D Platform is the alternate next generation of low cost Alix series (Alix.2D13 & Alix.6F2) from PC Engines. It is a high performance mini-ITX embedded board with AMD G Series (Dual-Core) CPU 1GHz with 64 bit and 512MB L2 cache featuring 3 Realtek Gigabit Ethernet & DDR3-1066 DRAM

Enclosure designed for ALIX.2* boards and APU2C0. Cutouts for 3 LEDs and 1 switch in front, cutouts for DB9, 2 LAN, 3 or 2 SMA connectors, DC jack in back. Enclosure made of anodized or painted aluminum. Dimensions 168 mm wide x 157 mm deep x 30 mm high. RoHS compliant.

The APU1D4 Platform is the alternate next generation of low cost Alix series (Alix.2D13 & Alix.6F2) from PC Engines. It is a high performance mini-ITX embedded board with AMD G Series (Dual-Core) CPU 1GHz with 64 bit and 512MB L2 cache featuring 3 Realtek Gigabit Ethernet & DDR3-1066 DRAM..

Enclosure designed for ALIX.2* boards. Cutouts for 3 LEDs and 1 switch in front, cutouts for DB9, 2 LAN, 3 or 2 SMA connectors, DC jack in back. Enclosure made of anodized or painted aluminum. Dimensions 168 mm wide x 157 mm deep x 30 mm high. RoHS compliant.

PC Engines IDE Straight Conn to CompactFlash Adapter (IDE Straight Conn) is a perfect replacement for PC hard disk drives, floppy power connector and 40 pin IDE connector.

Solid state replacement for 2.5" hard disk drives, 44 pin IDE connector. This version includes mounting hole locations for regular and legacy 2.5" hard drives.

Enclosure designed for ALIX.2* boards. Cutouts for 3 LEDs and 1 switch in front, cutouts for DB9, 2 LAN, 3 or 2 SMA connectors, DC jack in back. Enclosure made of anodized or painted aluminum. Dimensions 168 mm wide x 157 mm deep x 30 mm high. RoHS compliant.

ALIX 2D13 is a miniITX form factor system board optimized for thin clients, industrial user, wireless access points, internal and external mesh networks, firewalls and embedded applications. (3 LAN / 1 mini PCI / LX800 / 256 MB / USB / Battery)

Aluminum Enclosure designed for WRAP.2* / ALIX.3* boards. Cutouts for 1 LAN, DC jack, 2 SMA, DB9, 3 LEDs in back.

PC Engines Remote Display Kit for POST4D connects with POST4D PCI POST card. Its 20 inch cable allows display to be placed in a more suitable location.

PC Engines ALIX 2D2 System Board 2 LAN is a low-cost minilTX form factor system board optimized for high performance. This board is a perfect replacement for the WRAP series of system boards.

PC Engines N Female Protective Cap is watertight enough for covering unused ports of N female connectors.   Suitable for use with PIGNF6. Does not have a rubber seal.

PC Engines PCI Post Code Display - Motherboard Diagnostic Display is used to write diagnostic codes on PC BOIS. Dual digit LED display indicates codes and power supply rails.

Power Adapter for FW2600

The only way to fix your ALIX board corrupted BIOS, procedure is defined as follows:

PC Engines MMCX to N-Female Bulkhead Pigtail is RoHS certified. Engineered for peak performance upto 6GHz operations and usable for any mini-PCI card with MMCX connector.

SMA Female pigtails are commonly used for 3G/4G/LTE Antenna ports

PC Engines 1GB CompactFlash Card - Updated Firmware  supports DMA board. SLC flash offers higher endurance (100K vs. 10K erase cycles) and better read performance.

• Mikrotik RouterOS is ultra picky about CF controllers, not recommended. 

• Please note that these cards support DMA, must disable DMA when used on WRAP.1C / .1D / .2C   boards. 

 4GB SLC flash offers higher endurance (100K vs. 10K erase cycles) and better read performance.

Mikrotik RouterOS is ultra picky about CF controllers, not recommended. 

Please note that these cards support DMA, must disable DMA when used on WRAP.1C / .1D / .2C   boards.

Please note that these cards support DMA, must disable DMA when used on WRAP.1C / .1D / .2C   boards. 

Antenna for 5 GHz band, 5 dBi nominal gain. Reverse SMA connector. 

5dBi Rubber Duck RP-SMA antenna to be used with MMCXSMA and PIGSMA cables and ensures less loss connectivity.

Antenna for dual band (2.4 GHz and 5 GHz), 5 dBi nominal gain. Reverse SMA connector.

PC Engines Passive POE Injector provides power and data to Power Over Ethernet compatible devices. It is recommended to use 18V power adapter to minimize cable losses. This POE is compatible with ALIX board or any POE enabled device.

APU2E5 is the exact same as APU2E4 except for the configuration of NIC chips. APU2E4 has i210-AT. APU2E5 has i211-AT. Performance is pretty much similar.

Note: Can connect 2x WiFi Cards

*Heat Spreader Kit for APU Board is included

This Omnidirectional Outdoor Antenna is ideal for 2.4 GHz band with a nominal gain of 5 dBi.

2.4 GHz outdoor Omni Directional antenna is a versatile and economical choice for engineers and technicians. This antenna provides the best performance with minimum loss.

heat spreader placement fixture for apu2 / apu3 boards.

The cable has enough cross-links between the signals to transmit and receive data with accuracy. Moreover, this is used mostly to transfer files from one computer to another.Null Modem Cable (DB9F - DB9F) is a cross linked cable.

Silicon Labs CP2104 controller, which has proven reliable in our experience. Unlike competitors, our adapter has the DB9F female connector with null-modem pin-out to allow for direct connection to Alix/APU system boards without a DB9 null modem cable

44-Pin IDE Female to Female Cable is short, but very efficient, and is easy to enclose.

The heat spreader kit is included with apu boards, no need to order separately unless you have to migrate a board to a new enclosure.

This is a 44 pin cable with 2 mm pitch connectors for 2.5" HDDs. Shortened version with opposed connectors for easier mounting inside case1c / case1d enclosures