RUT956 Industrial Cellular Router
RUT956 Industrial Cellular Router
RUT956 Industrial Cellular Router
RUT956 Industrial Cellular Router
RUT956 Industrial Cellular Router
  • New
RUT956 Industrial Cellular Router
RUT956 Industrial Cellular Router
RUT956 Industrial Cellular Router
RUT956 Industrial Cellular Router
RUT956 Industrial Cellular Router

RUT956 Industrial Cellular Router

In Stock
US$299.00

RUT956 is an industrial router that combines cellular, Wi-Fi, and wired connectivity options with automatic WAN failover and GNSS capabilities. Serial communication interfaces enable integrating more varied devices into the solution ecosystem, while I/O and advanced RutOS software facilitate equipment control, automation, and event notifications.

Description

Mobile & Cellular

Feature Description
Mobile Module 4G LTE Cat 4 up to 150 DL / 50 UL Mbps; 3G up to 21 DL / 5.76 UL Mbps; 2G up to 236.8 kbps
3GPP Release Release 11
SIM Switch Dual SIMs with auto-switching: weak signal, data/SMS limit, roaming, no network, idle, etc.
Status Info Full metrics: IMSI, ICCID, RSRP, SINR, Cell ID, MCC, MNC, ARFCN, TAC, etc.
SMS Features Email-to-SMS, SMS-to-Email, SMPP, scheduling, HTTP, autoreply
USSD Supports USSD send/receive
Band Management Band lock, used band display
Multiple PDN Allows use of different PDNs for multi-network service
SIM PIN Mgmt Set/change/disable SIM PIN
APN Auto APN detection and setup
Bridge Mode Bridge between mobile ISP and LAN
Passthrough Assign mobile IP to LAN device

Wireless (Wi-Fi)

Feature Description
Wireless Mode 802.11b/g/n (Wi-Fi 4), AP and STA modes
Wi-Fi Security WPA2/WPA3, PEAP, EAP, OWE, client separation, PMF, EAP-TLS
SSID/ESSID SSID stealth, MAC-based access control
Max Wi-Fi Clients Up to 100 simultaneous users
Roaming Features 802.11r (fast roaming), 802.11v (BSS), 802.11k (RRM)
QR Code Generator Enables QR scan login
TravelMate Redirect Wi-Fi portal to downstream LAN device

Ethernet

| WAN Port | 1 x 10/100 Mbps, IEEE 802.3/u/az, Auto MDI/MDIX |
| LAN Ports | 3 x 10/100 Mbps, Auto MDI/MDIX |


Networking

| Routing | Static, BGP, OSPF v2, RIP, EIGRP, NHRP, Policy-based routing |
| Protocols | TCP/UDP, IPv4/6, MQTT, SNMP, PPPoE, VRRP, HTTP/S, SSH, Telnet, FTP/SFTP, NTP, DNS, SMPP |
| VoIP Passthrough| H.323 & SIP ALG NAT helpers |
| Connection Mon | Ping/Wget/LCP/ICMP/Periodic Reboot |
| Firewall | Port forward, TTL, NAT, DMZ, custom rules |
| DHCP | Static/Dynamic leases, MAC wildcards, DHCP relay |
| QoS / SQM | Traffic queue by IP/service/port, WMM, 802.11e |
| DNS over HTTPS | Secure DNS proxy support |
| Network Backup | Failover: Mobile, VRRP, Wired, Wi-Fi WAN |
| Load Balancing | Multi-WAN traffic distribution |
| SSHFS | Mount remote filesystem via SSH |
| Traffic Monitoring| Real-time stats, wireless charts, usage history |
| Port Mirroring | Mirror Ethernet traffic for diagnostics |


Security

| Authentication | PSK, X.509, RADIUS, TACACS+, brute-force protection, time-based login blocks |
| Attack Prevention| DDoS protection, Port scan detection, SSH/HTTP/HTTPS protections |
| Web Filter | Blacklist and Whitelist control |
| Access Control | Restrict access to SSH, WebUI, CLI, Telnet |
| Firewall Config | GUI/CLI-based rule mgmt, NAT64, DMZ |
| VLAN | Port/tag-based isolation |
| SSL Certs | Let’s Encrypt, SCEP |


VPN

| Protocols | OpenVPN, IPsec, GRE, L2TP, PPTP, WireGuard, SSTP, Tinc, ZeroTier, DMVPN |
| Encryption | AES-GCM, AES-CBC, 3DES, RC2, CAST5, DESX, various modes |


Industrial Protocols

| Modbus | RTU (RS232/RS485), TCP, USB; INT, UINT, FLOAT, HEX, ASCII |
| DLMS/COSEM | Client over RS232, RS485, TCP |
| BACnet | Router via RS485/TCP; BBMD, multiple IP interfaces |
| OPC UA | Client & Server modes via TCP |
| DNP3 | Station/Outstation; RS232, RS485, TCP, USB |
| MQTT Gateway | Bridge between Modbus & MQTT |
| Data to Server | HTTP(S), MQTT, Azure MQTT + LUA scripting |


Monitoring & Management

| WebUI | Full config, status, diagnostics, logs, FW updates |
| TR-069 | Supported: OpenACS, EasyCwmp, tGem, LibreACS, etc. |
| SNMP | v1/v2/v3 with brute-force protection |
| MQTT Broker | Local broker and publisher supported |
| RMS | Teltonika Remote Management System integration |


Location Tracking

| GNSS | GPS, GLONASS, BeiDou, Galileo, QZSS |
| NMEA/NTRIP | NMEA 0183, NTRIP protocol support |
| Geofencing | Multi-zone geofence alerting |


Interfaces

| RS232 | DB9, Console, Serial-over-IP, Modbus, NTRIP |
| RS485 | 2-wire/4-wire, 300–115200 baud |
| USB | USB 2.0 – supports flash, HDD, printer, modem, Samba, serial adapter |
| SD Card | MicroSD up to 2TB; storage, DLNA, Samba |
| I/O | 2 Inputs, 2 Outputs, incl. analog input, relay, isolated & open collector |


Power & Environment

| Power Input | 9–30 VDC, surge/reverse protection, passive PoE on LAN1 |
| Consumption | <2W idle, <7W max |
| Temperature | -40°C to +75°C |
| Humidity | 10% to 90% non-condensing |
| IP Rating | IP30 |


Physical

| Ethernet Ports | 4 x RJ45 10/100 Mbps |
| Antenna Ports | 2 x SMA (LTE), 2 x RP-SMA (Wi-Fi), 1 x SMA (GNSS) |
| USB Port | 1 x USB-A |
| SIM Slots | 2 x Mini SIM (2FF), eSIM optional |
| I/O Connector | 10-pin industrial socket, 4-pin power connector |
| Casing | Aluminium with plastic panels |
| Size (mm) | 110 x 50 x 100 |
| Weight | 287 g |
| Mounting | DIN rail, wall, flat (kits required) |


Certifications & Compliance

| Certifications | CE, FCC, IC, PTCRB, RCM, Anatel, C1D2, UKCA, CB, UL/CSA, RoHS, REACH |
| EMC Standards | EN 55032/35, EN 301 489, EN 300 328, EN 301 908, EN 303 413 |
| Safety Standards| EN/IEC 62368-1, UL 121201, Class I Div 2 / Zone 2 |

Product Details

RUT956

Attachments

Reviews (0)

No reviews

4 other products in the same category:

By using this site, you agree to cookies for a better experience. See Privacy Policy.