CorpShadow now provides ready made bundles with Ubuntu OS to save you the hassle and time.
*See Description for More Details*
*Note: We do not provide software support*
There are 295 products.
CorpShadow now provides ready made bundles with Ubuntu OS to save you the hassle and time.
*See Description for More Details*
*Note: We do not provide software support*
This industrial USB to TTL converter adopts an original FT232RL chip, providing greater stability and compatibility, enabling industrial-grade high-performance communication between a computer and TTL devices.
18AWG is a standard gauge cable, which is suitable for most applications, this cable can carry up to 10 AMPs, 125 Volt load.
The IP based Power Switch is a simple product that automatically power-cycles any device when internet connectivity is lost or you want to do it manually. This is one of the best power solution for remote locations where you have to send tech only for power cycle.
A single native (non-USB) SATA 3.0 port on the ODROID-M1 is provided for use with a 2.5inch HDD or SSD NAND Memory storage device. This SATA interface delivers near 500MB/s of sequential access. The SATA mount kit contains a SATA Data cable, a SATA Power cable, and a mount plate with some support screws. However, since the SATA power port doesn’t have a 12Volt power rail, a separated external 12Volt SATA power supply is required to use a 3.5inch HDD.
1080p Webcam The GUV3100 is a Full HD USB camera that enables high-quality audio and video collaboration through laptops, computers and more.
The ODROID H2 Net card brings 4 Additional 2.5 GbE Ethernet ports to your H2/H2+ for an incredibley low price.
ESPRESSOBin Board is a low cost high performance ARM based 64bit single board computer aimed at the networking, storage, and connectivity space.
You can show colorful texts and pictures via USB interface with VT100/ANSI style commands without big HDMI monitor. You can connect this tiny display to your ODROID as well as Mac, Linux PC, Windows PC even an enterprise server.
This 16GB mSATA SSD Module (Updated Firmware) is perfect for use with latest APU board. Works well for Windows XP, Windows 7, Linux and MacOS10.X.
Raspberry pi best value power supply which will give you actual 5V after complete boot up. Ideal for general purpose as well, like any device with micro-USB
Cable is made of 24AWG pure copper listed pair conduits with 50u" gold plated contacts (short body). Most budget cables skimp with 10u". 350 MHz Category 5E Patch Cord (UTP)
Infrared Weatherproof IP Camera The GSC3615 is a weather-proof Infrared (IR) wall-mounted bullet IP camera with a 3.6mm lens.
This is a handy interface bridge between Mini PCIe 3G/4G/LTE modules and Raspberry Pi. You can easily insert a Mini PCIe module in this shield then start using high-speed cellular internet with your Raspberry Pi.
You also need to get a EC25 Mini PCle 4G/LTE Module and Antennas to make this product works.
This is a single LCD module as a spare part that we’ve put into the ODROID-GO kit.
The display has 320×240 pixels and the communication interface is SPI.
Supports SATA Interface rate of 6Gb/s
Ultra high-performance and low power consumption
Supports dynamic power management and SMART
TRIM Command Supported
100% full load burn-in test
Pass LPS
Protections: Short circuit / Overload / Over voltage / Over temperature
Class II power (without earth pin)
2 pole USA plug
Solution for PCEngines & MikroTik boards in a 19" 1U rack mount enclosure to install in data center. Ideal for redundant or high performance firewalls, VPN solutions, VOIP solutions and more, great choice to rack mount low power and fanless boards.
Cable is made of 24AWG pure copper listed pair conduits with 50u" gold plated contacts (short body). Most budget cables skimp with 10u". 350 MHz Category 5E Patch Cord (UTP)
Being an easy add-on, Yealink IP Phone Camera CAM50 is a HD video camera with high quality that helps your Yealink SIP-T58V/SIP-T58A IP phones to turn into a real desktop video conferencing solution in seconds.
Indoor Black/Blue/Red Enclosures for PCEngines APU4 boards.
Supports SATA Interface rate of 6Gb/s
Ultra high-performance and low power consumption
Supports dynamic power management and SMART
TRIM Command Supported
Fully assembled 3.2inch display with 320x240 pixels TFT LCD and a resistive touch overlay. Just plug it on top of ODROID-C1. 2x13 tall female header is already soldered on the PCB.
Fully assembled 3.5inch display with 480×320 pixels TFT LCD and a resistive touch overlay.
It is a high performance mini-ITX embedded board with AMD GX Series (Quad-Core) CPU 1GHz with 64 bit and 2MB L2 cache featuring 3 Intel i211AT & DDR3-1333 DRAM with optimized for 3G/LTE Modems.
Expected in 2022
Supports SATA Interface rate of 6Gb/s
Ultra high-performance and low power consumption
Supports dynamic power management and SMART
TRIM Command Supported
Cable is made of 24AWG pure copper listed pair conduits with 50u" gold plated contacts (short body). Most budget cables skimp with 10u". 350 MHz Category 5E Patch Cord (UTP)
PCEngines Indoor Red Enclosure is designed for Following boards.
ALIX2D13, APU1, APU2 and APU3 models.
Custom Lenght: 1m, 1.2m, 1.5m, 1.8m, 2m
Colors: Rose Gold, Gold, Silcer, Dark Grey
The Raspberry Pi Pico is an entirely new type of microcontroller from Raspberry Pi. Small, cheap and flexible - it’s great for learning to code with MicroPython!
PCEngines Indoor Red Enclosure for APU & ALIX2D13 is designed for Following boards
APU Series
It is a high performance mini-ITX embedded board with AMD GX Series (Quad-Core) CPU 1GHz with 64 bit and 2MB L2 cache featuring 3 Intel i211AT & DDR3-1333 DRAM with optimized for 3G/LTE Modems.
*Heat Spreader Kit for APU Board is included
Ideal product for your custom projects with 5-inch multi-touch screen for ODROID gives users ability to create all-in-one. A great choice for projects such as tablets, game console and embedded systems.
Cable is made of 24AWG pure copper listed pair conduits with 50u" gold plated contacts (short body). Most budget cables skimp with 10u". 350 MHz Category 5E Patch Cord (UTP)
Jeff Probe is an open-source JTAG probe based entirely off the popular black magic probe.
It is a high performance mini-ITX embedded board with AMD GX Series (Quad-Core) CPU 1GHz with 64 bit and 2MB L2 cache featuring 4 Intel i211AT & 2GB DDR3-1333 DRAM.
*Heat Spreader Kit for APU Board is included
What's new and different from the VU7+?
* AUDIO JACK: The VU7A+ (Audio) is meant to be used with sound! Plug in your own speakers or earbuds/headphones into the audio jack (3.5mm)
Lead time is 7 Days if out of stock