Availability: 8 In Stock
DC Plug specification : Inner diameter 0.8mm and outer diameter 2.5mm
Center is positive(RED wire) and outer is negative(BLACK wire)
3ft USB 3.0 A Male to B Male Cable
Reference: USB33ABMM03
US$5.95
USB 3.0 has arrived with supporting speeds more than 10X that of it's predecessor. Up to 5.0 Gbs. These cables will allow you to connect new USB 3.0 devices to your USB 3.0 enable computer or controller.
CorpShadow's USB 3.0 cables deliver the quality and value according to your expectations. These cables meet the new specifications and will provide years of reliable service.
USB33ABMM03
Data sheet
- Color
- Blue
- Connector
- Gold Plated
- Gauge
- 28/24 AWG
- Data Transfer Rate (Max)
- 5 Gbit/s (640 MB/s)
- Length
- 3 Ft
- Return Warranty
- Standard 30 Days
- Manufacturer Warranty
- 1 Year Limited Warranty
USB 3.0 has arrived with supporting speeds more than 10X that of it's predecessor. Up to 5.0 Gbs. These cables will allow you to connect new USB 3.0 devices to your USB 3.0 enable computer or controller.
16 other products in the same category:
Availability: 3 In Stock
SATA cables are perfect for system builds with tight fitting environments with ODROID-H2 Case Type 1, Type 3 and Type 4 to connect a SATA HDD/SSD storage. Utilising compact stackable connectors, this flexible 200mm cables are neat and manageable.
Availability: 5 In Stock
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
Availability: 5 In Stock
System console interface board for platform development and debugging.
Availability: Out of stock
A super handy switch cable for your Raspberry Pi 4 Model B , removing the need to pull the USB-C connector out of your Raspberry Pi (or mess around with sockets/plugs) every time you want to power up/down.
Availability: 3 In Stock
A single native (non-USB) SATA 3.0 port on the ODROID-M1 is provided for use with a 2.5inch HDD or SSD NAND Memory storage device. This SATA interface delivers near 500MB/s of sequential access. The SATA mount kit contains a SATA Data cable, a SATA Power cable, and a mount plate with some support screws. However, since the SATA power port doesn’t have a 12Volt power rail, a separated external 12Volt SATA power supply is required to use a 3.5inch HDD.
Availability: 79 In Stock
Connects HDMI devices to HDMI devices
Resolution up to 1080p
HDMI spec : V1.4
RoHS compliant
Availability: 18 In Stock
DC Plug specification : Inner diameter 0.8mm and outer diameter 2.5mm
Center is positive(RED wire) and outer is negative(BLACK wire)
Availability: 3 In Stock
Give your 40 pin, 0.5mm pitch, devices a stretch with this extension board.
Availability: 11 In Stock
Center is positive(RED wire) and outer is negative(BLACK wire)
Availability: 3 In Stock
Part for the I2S 2Watt Stereo Boom Bonnet Kit, for use with the ODROID C1+ / C2.
Availability: 7 In Stock
This DP to HDMI adapter cable provides an easy way to turn a DisplayPort into a HDMI Port for your computer.
Availability: 5 In Stock
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
Availability: 4 In Stock
Mouse Keyboard I/O Splitter Cable Adapter is suitable for laptops, PCs or even ALIX 1C boards.
Availability: 5 In Stock
Silicon Labs CP2104 controller, which has proven reliable in our experience. Unlike competitors, our adapter has the DB9F female connector with null-modem pin-out to allow for direct connection to Alix/APU system boards without a DB9 null modem cable