The Khadas Edge2 IO Module is a GPIO break-out board for the Edge2 that expands the functions of Edge2 by connecting to the FPC connector on the underside. It incorporates a UHS-I SD card reader, a dual-channel infrared receiver, USB ports and more!
The Edge2 Station adds 10/100M ethernet, a 3.5mm headphone jack, UART for debugging, external audio DAC, and more, to your Edge2 ARM PC by docking with pogo pads located on the underside of the device.
The Odroid-H2 Net Card is a powerful and efficient network card for the Odroid-H2 single-board computer. Its dual Gigabit Ethernet ports provide reliable high-bandwidth network connections, ideal for data center networking, server hosting, and network security. With its compact design and easy installation, it's a convenient accessory for your Odroid-H2...
This is a handy interface bridge between Mini PCIe 3G/4G/LTE modules and Raspberry Pi. You can easily insert a Mini PCIe module in this shield then start using high-speed cellular internet with your Raspberry Pi.
You also need to get a EC25 Mini PCle 4G/LTE Module and Antennas to make this product works.
The Raspberry Pi Pico is an entirely new type of microcontroller from Raspberry Pi. Small, cheap and flexible - it’s great for learning to code with MicroPython!
The HiFi Shield Plus provides both stereo RCA connectors to connect to external amplifiers and other audio equipment. Via TI’s high-end PCM5242 DAC chip(known as Burr-Brown), it supports 16, 24, 32 bit audio formats with minimal THD+N ratio (0.002%) and ideal dynamics (114dB+), plus amazing sampling rates of 384kHz
U3 IO Shield is the board that can be plugged on the neat of ODROID-U3 via tiny 8 pin IO connector. You can have 36 IO ports of GPIO/PWM/ADC. The shape and dimension are exactly same as ODROID-U3. It comes with 12pcs of PCB spacers for easier and solid stacking assembly.
The New M2X Extension board is an ultra-thin version of the Original M2X Board. It has M.2 slots for adding a 4G LTE module and NVMe SSD to your VIM3, 3L or Edge-V. A nano-SIM card slot is built into the board.
Khadas Edge2 is powered by the RK3588S, a next generation 8-core 64-bit SoC from Rockchip. The RK3588S is Rockchip's newest flagship IoT SoC utilizing the 8 nanometer lithography process. As a result, power consumption is similar to the RK3399, yet we have achieved an overall performance boost of up to 2.5 times.
Note: This product is not compatible with the ODROID-H2 series.
The M.2 screws are pre-installed. (2 pcs)
The M.2 2×2 card, provides two M.2 PCIe Gen 3 x2 lanes connectors, from the PCIe Gen 3 x4 lanes of the mainboard.
The M.2 4×1 card, provides four M.2 PCIe Gen 3 x1 lanes connectors instead. It allows you to use four M.2 devices: any combination of NVMe drives, Network adapters, WiFi adapters, 5G adapters, etc that leverage the bandwidth of PCIe Gen 3 x1 lane.
Note: This product is not compatible with the ODROID-H2, H3 series.
The M.2 screws are pre-installed. (4 pcs)
Showing 1-20 of 20 item(s)
By using this site, you agree to cookies for a better experience. See Privacy Policy.
