USB3.0 to SATA Bridge Board Plus

Boost your ODROID-XU4 and ODROID-XU4Q to the next level of storage performance with SSD or HDD. 
This board contains a USB3.0 to SATA3 controller (JMicron JMS578) allowing interfacing of a single 2.5" SATA HDD/SDD. Archive over ~260MB/sec transfer speed with UAS capability. 

USB3.0 to SATA Bridge Board offers data and power to the storage.

- Dimension : 48 x 29 x 6 mm (approx., including connector)
- Interface : Micro-USB3.0
- Connector : Compatible with 2.5inch SATA HDD / SSD
- Control IC : JMS578(VID:PID = 152D:0578)
.

This board works with ODROID-C1/C2 at USB2.0 speed. 
.

Board Detail 

.
PERFORMANCE
An SSD write and read tests with ODROID-XU4 USB 3.0 on Linux Kernel 4.9.44.
.

Write test
Write : dd if=/dev/zero of=test oflag=direct bs=4M count=256
256+0 records in
256+0 records out
1073741824 bytes (1.1 GB, 1.0 GiB) copied, 4.26754 s, 252 MB/s
.

Read test
dd if=test of=/dev/null iflag=direct bs=4M
256+0 records in
256+0 records out
1073741824 bytes (1.1 GB, 1.0 GiB) copied, 4.1119 s, 261 MB/s
.

IOzone test

.
Schematics:

https://dn.odroid.com/Accessory/USB3.0%20to%20SATA%20BRIDGE%20PLUS_REV0.1_20170517.pdf
.
Write test
dd if=/dev/zero of=test oflag=direct bs=4M count=256
256+0 records in
256+0 records out
1073741824 bytes (1.1 GB) copied, 30.8774 s, 34.8 MB/s
.
Read test
dd if=test of=/dev/null iflag=direct bs=4M
256+0 records in
256+0 records out
1073741824 bytes (1.1 GB) copied, 28.6036 s, 37.5 MB/s