Laser Acrylic enclosure for the 3.5 Inch LCD Shield.
- Home
-
Components
add remove
- Wireless add remove
- IoT addremove
- Ready Systems addremove
- Wireless addremove
- VoIP
- Combo Kits
- Embedded Systems
- Services
- Support
- Contact Us
USB3.0 eMMC Module Writer
Reference: USB3EMW
Easier and faster way to flash your OS image into the eMMC Module. With this unit, you will not need a separate USB card reader. Just attach your eMMC module directly to your PC/Mac via this writer board.
– USB 3.0 Interface
– Native eMMC 8bit wide data interface, instead of slow SD 4bit width
– Works in HS200 mode
– Windows / Mac / Linux Compatible
– Works with ODROID Orange, Red and Blue eMMC modules
– Use with Etcher or Win32DiskImager software on your PC
– It can’t access the eMMC hidden boot blocks
– Rated Power : 5V/500mA (including eMMC module)
– Dimensions : 60x26x4.5 mm
It does not work with the Black eMMC Modules.
Data sheet
- Board Category
- ODROID-C0
ODROID-C1+
ODROID-C2
ODROID-C4
ODROID-H2+
ODROID-N2+
ODROID-XU4

16 other products in the same category:
The ODROID-GO Super (OGS) is an upgraded version of the very popular ODROID-GO Advance.
Get a free 16GB Micro SD Card. (Limited time offer)
This is a spare board for ODROID-GO Advance Black Edition. This is NOT compatible with the original ODROID-GO Advance.
Blue illuminated Power Button with pre-assembled jumper wires.
Very powerful x86 64bit SBC with large memory capacity and advanced IO ports
NO ETA for Next Batch.
- Connector : 1.25mm 4-pin wafer male wire
- Blue : PWM input
- Yellow : Tacho output (Frequency Generator)
- Red : DC 5V
- Black : Ground
DC Plug specification : Inner diameter 0.8mm and outer diameter 2.5mm
Center is positive(RED wire) and outer is negative(BLACK wire)
The ODROID-C2 is a 64-bit quad-core single board computer(SBC) that is one of the most cost-effective 64bit development boards available in the ARM world.
Fully assembled 3.5inch display with 480×320 pixels TFT LCD and a resistive touch overlay.
5pieces of 10pin male header is excellent choice for your DIY project.
Build your own gaming console with a powerful XU4
GameSir G3w adopts a 32-bit MCU chip, computing capability is up to 48 million times per second that stands for its high sensitivity and accuracy in overall performance.
This is the only way that you can upgrade your OS in the eMMC. It is highly recommended item.