Use Spade Wire fork terminal with
Passive POE injector Set 5.5mm x 2.5mm (Standard)
SET contains two pieces INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet.
SET contains two pieces INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet. Passive Power Over Ethernet - SET is applicable for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices.
SET is compatible with most devices available on the market such as D-Link, Linksys, Airlive, Senao, Wline, Micronet, Edimax etc. The devices can be supplied standardly up to 50V. (The power adapter is not included - it is possible to use the power adapter of the powered device as access point, IP camera etc.) This Passive PoE range is normally from 30-40 metres/100-130 ft (the real distance depends on the power supply, type of cable and powered device).
Note: Passive POE does not comply with the IEEE 802.3af specification.
- Injector and Splitter
- DC jack center positive, 2.5 mm pin. RJ45 pins 4,5 = positive, RJ45 pins 7,8 = negative
- Return Warranty
- Standard 30 Days
- Manufacturer Warranty
- 1 Year Limited Warranty
12 other products in the same category:
Type: 6.3mm female with caseWire Size (AWG): 22-16Max Current: 19 AmpWire Type: COPPERSleve Color: Transparent
PC Engines Passive POE Injector provides power and data to Power Over Ethernet compatible devices. It is recommended to use 18V power adapter to minimize cable losses. This POE is compatible with ALIX board or any POE enabled device.
It converts two round prongs European plug to two flat prongs American plug. This adapter can be used safely for supply voltage up to 250V, and current up to 6A.