4-channel I2C-safe Level Converter
4-channel I2C-safe Bi-directional Logic Level Converter
Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V.
This breakout has 4 BSS138 FETs with 10K pullups. It works down to 1.8V on the low side, and up to 10V on the high side. The 10K's do make the interface a little more sluggish than using a TXB0108 or 74LVC245 so we suggest checking those out if you need high-speed transfer.
16 other products in the same category:
This pi plate is perfect for when you want to build a stand-alone project with its own user interface. The 4 directional buttons plus select button allows basic control without having to attach a bulky computer.
Deploy your outdoor Raspberry Pi project without concerning rain, snow, dust in this IP65 plastic case with clear top. This weatherproof enclosure has three IP67 SMA to u.FL(IPEX) cable connector for connectivity and a waterproof IP68 micro USB cable-end socket if you want to power your project with modified original Raspberry Pi power supply.
Availability: 199 In Stock
Raspberry pi best value power supply which will give you actual 5V after complete boot up. Ideal for general purpose as well, like any device with micro-USB
Power supply for your Raspberry Pi 4 that doesn't compromise on quality, this 1.5m USA USB-C power supply is the ideal choice.
Ships from Canada.
TFP401 HDMI/DVI Decoder to 40-Pin TTL Breakout - With Touch
Availability: 54 In Stock
The connector heads measure 0.51" x 0.36" x 0.25" (13.0 x 9.3 x 6.3 mm) on the USB micro B end and 0.51" x 0.55" x 0.25" (13.0 x 13.8 x 6.3 mm) on the USB A end.
5.0" 40-pin TFT Display - 800x480 with Touchscreen
Availability: 10 In Stock
The stunning new Raspberry Pi 3 Model B+ has landed at CorpShadow.
Give your 40 pin, 0.5mm pitch, devices a stretch with this extension board.
40 Pcs of Dupont wire with 20CM length, ideal to connect for your Raspberry Pi project.
GPIO Header for Raspberry Pi - Extra tall 2x13 Female Header
This is a one-fan Raspberry Pi radiator compatible with Raspberry Pi 3B/3B+/4B.
The RC Air Mouse and Keyboard uses the latest 2.4GHz wireless technology with a sampling frequency up to 120Hz. Use it like a Wii remote to control your mouse cursor on the screen.
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
Separated pin plugs, this cable is ideal for powering and connecting up to the debug/login console on the Raspberry Pi or BeagleBone Black. Connect the pins as shown to power the Pi or BBB and establish the RX/TX link.
Availability: 73 In Stock
It is a good plastic box for Raspberry Pi, which can protect it with one of these snazzy plastic enclosures?. These cases protect the Raspberry Pi from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together.
Product added to compare.