Reference: GPIOHDR
GPIO Header for Raspberry Pi - Extra tall 2x13 Female Header
Connect your own PCB to a Raspberry Pi with this extra-tall female header. The female header part has extra spaces to make it 13.6mm tall: when placed on your Pi, a PCB will clear the Ethernet and USB jacks. This header has 3mm of pins, compared with our stacking version which is the same base height but has 9.7mm height instead. With 3mm you don't have to cut the really long pins, so its ideal for basic Pi plate design
Data sheet
GPIO Header for Raspberry Pi - Extra tall 2x13 Female Header
Make your Pi a little slimmer with this microSD card adapter board. It slides in where the SD card goes but is half the length. Pop in a microSD card for a sleeker machine. The microSD card holder is a push-push type so you can push on the edge that sticks out to remove the card when necessary.
The connector heads measure 0.51" x 0.36" x 0.25" (13.0 x 9.3 x 6.3 mm) on the USB micro B end and 0.51" x 0.55" x 0.25" (13.0 x 13.8 x 6.3 mm) on the USB A end.
This is a one-fan Raspberry Pi radiator compatible with Raspberry Pi 3B/3B+/4B.
This industrial USB to TTL converter adopts an original FT232RL chip, providing greater stability and compatibility, enabling industrial-grade high-performance communication between a computer and TTL devices.
Power supply for your Raspberry Pi 4 that doesn't compromise on quality, this 1.5m USA USB-C power supply is the ideal choice.
Ships from Canada.
Raspberry pi best value power supply which will give you actual 5V after complete boot up. Ideal for general purpose as well, like any device with micro-USB
This is a handy interface bridge between Mini PCIe 3G/4G/LTE modules and Raspberry Pi. You can easily insert a Mini PCIe module in this shield then start using high-speed cellular internet with your Raspberry Pi.
You also need to get a EC25 Mini PCle 4G/LTE Module and Antennas to make this product works.
It is a good plastic box for Raspberry Pi, which can protect it with one of these snazzy plastic enclosures?. These cases protect the Raspberry Pi from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together.
Simplify your Internet of Things with a passive PoE injector cable. These are quite handy for projects that have Ethernet connectivity and also need a power cable.
5G Development Kit is for M.2 package 5G modems designed to work with the Raspberry Pi. It allows you to develop, trial, and test your ideas on this platform in preparation for the commercialization of 5G devices and networks. Data throughput up to 5.0 Gbps DL and 1.0 Gbps UL is possible with that kit.
40 Pcs of Dupont wire with 20CM length, ideal to connect for your Raspberry Pi project.
Raspberry Pi® computer you just got has a row of 2x13 pin headers soldered on - those are the GPIO (general purpose input/output) pins and for those of us who like to hack electronics they are where the real fun is. By programming the Pi, you can twiddle those pins high or low, send and receive I2C and SPI data, and access the 3V and 5V power rails.
The USB 2.0 Extension Cable extend the distance between your USB peripheral and your USB hub or computer assure good signal quality to meet USB specification.
5.0" 40-pin TFT Display - 800x480 with Touchscreen
This robust metal enclosure has been designed specifically for the official Raspberry Pi Compute Module 4 IO board and comes complete with fixings, a cooling fan and a bonus included screwdriver.
4-channel I2C-safe Bi-directional Logic Level Converter
