5V/6A Power Adapter (US)

Lithium Polymer rechargeable cell with a protection circuit.

Highly recommended item to protect a ODROID-HC2.

Fully assembled 3.5inch display with 480×320 pixels TFT LCD and a resistive touch overlay.

This “Case Type 3” is designed for the user who needs high bandwidth network with mid-range storages.

This is a perfect connector pack for various DIY projects with the ODROID-C0. You need a soldering skill to use this pack.

DC Plug specification : Inner diameter 0.8mm and outer diameter 2.5mm
Center is positive(RED wire) and outer is negative(BLACK wire)

* Amlogic ARM® Cortex®-A5(ARMv7) 1.5Ghz quad core CPUs 
* Mali™-450 MP2 GPU (OpenGL ES 2.0/1.1 enabled for Linux and Android)
* 1Gbyte DDR3 SDRAM
* eMMC4.5 HS200 Flash Storage slot / UHS-1 SDR50 MicroSD Card slot

Recommanded for those who wants to protect the ODROID-N2 board from dust and the elements.

The CloudShell-2 for the ODROID-XU4 is an affordable DIY Network Attached Storage (NAS) Solution with RAID support.

This heatsink might be useful for who needs the full throttled quad-core performance with ODROID-C1. 

• Connector : 1.25mm 4-pin wafer male wire
• Blue : PWM input
• Yellow : Tacho output (Frequency Generator)
• Red : DC 5V
• Black : Ground

Center is positive(RED wire) and outer is negative(BLACK wire)

The RC Air Mouse and Keyboard uses the latest 2.4GHz wireless technology with a sampling frequency up to 120Hz. Use it like a Wii remote to control your mouse cursor on the screen.