Black Indoor Enclosure for APU/ALIX - 3 LAN
PCEngines Indoor Black Enclosure designed for ALIX2D13 and APU1, APU2 and APU3 Series boards.
Tools needed: Phillips screwdriver, 5 mm or 3/16" nut driver. Remove hex nuts from DB9 connector of ALIX/APU board. Mount ALIX/APU board in an enclosure, then fasten all screws and hex nuts.
ALIX2D13, APU1D, APU1D4
1 x DC Power Jack, 1 x DB9 Serial, 3 x Ethernet, 2 x USB and 2x SMA antenna Connector
3 LEDs and 1 Reset
Anodized or painted aluminum
1 x Enclosure top, 1 x Enclosure base, 4 x screws to mount system board, 4 x Screws to close enclosure, 4 x Self-Adhesive Feet, 2 x Rubber Plugs for unused SMA holes
APU3 Return Warranty
Standard 30 Days
16 other products in the same category:
11 In Stock
(3 LAN / 1 mini PCI / LX800 / 256 MB / USB / Battery) ALIX 2D13 is a miniITX form factor system board optimized for thin clients, industrial user, wireless access points, internal and external mesh networks, firewalls and embedded applications.
19 In Stock
SATA cable with combined data / power on drive end, separate SATA data and 2 pin power header for apu end.
11 In Stock
HDD Mounting Kit for PCEnginesEmbedded Box ( CASE3D3BLKU)
20 In Stock
Enclosure designed for ALIX.2* boards and APU2C0. Cutouts for 3 LEDs and 1 switch in front, cutouts for DB9, 2 LAN, 3 or 2 SMA connectors, DC jack in back. Enclosure made of anodized or painted aluminum. Dimensions 168 mm wide x 157 mm deep x 30 mm high. RoHS compliant.
15 In Stock
This 16GB mSATA SSD Module (Updated Firmware) is perfect for use with latest APU board. Works well for Windows XP, Windows 7, Linux and MacOS10.X.
10 In Stock
PC Engines Remote Display Kit for POST4D connects with POST4D PCI POST card. Its 20 inch cable allows display to be placed in a more suitable location.
Exact specifications as per PCEngine's recommendations. Suitable for all ALIX boards other than ALIX.1D/1E,
Switching adapter with US plug, with FCC. ROHS and CEC compliant
Out of stock
ALIX 3D3 is a miniITX form factor system board optimized for thin clients, industrial user, wireless access points, internal and external mesh networks, firewalls and embedded applications.
45 In Stock
PC Engines SATA data with Power cable for APU Boards has three connectors, , data / power on drive end, separate SATA data and 2 pin power header for APU System board end.
Out of stock
The APU1D Platform is the alternate next generation of low cost Alix series (Alix.2D13 & Alix.6F2) from PC Engines. It is a high performance mini-ITX embedded board with AMD G Series (Dual-Core) CPU 1GHz with 64 bit and 512MB L2 cache featuring 3 Realtek Gigabit Ethernet & DDR3-1066 DRAM
14 In Stock
4GB SLC flash offers higher endurance (100K vs. 10K erase cycles) and better read performance.
116 In Stock
Exact specifications as per PCEngine's recommendations. Suitable for all ALIX boards other than ALIX.1D/1E, Switching adapter with US plug, with FCC. ROHS and CEC compliant.
26 In Stock
Supports SATA Interface rate of 6Gb/s
Ultra high-performance and low power consumption
Supports dynamic power management and SMART
TRIM Command Supported
1302 In Stock
Convert any half size miniPCI-e to FULL size miniPCI-e
12 In Stock
44-Pin IDE Female to Female Cable is short, but very efficient, and is easy to enclose.
19 In Stock
Compact size AC adapter, saves space on power strips. Input voltage 100-240 V AC, 47-63 Hz. Output voltage 12 V DC, maximum current 2.0A. High efficiency. 2.5 mm jack, center positive.
Product added to compare.