5pieces of 10pin male header is excellent choice for your DIY project.
List of products by brand HardKernel
There are 116 products.
Part for the I2S 2Watt Stereo Boom Bonnet Kit, for use with the ODROID-XU4 / XU4Q.
High quality stable and low noise power supply for ODROID-HC2, ODROID-C4 and ODROID-N2+
Power Supply compatible with SmartPower3.
This is a single LCD module as a spare part that we’ve put into the ODROID-GO kit.
The display has 320×240 pixels and the communication interface is SPI.
Fully assembled 3.5inch display with 480×320 pixels TFT LCD and a resistive touch overlay.
Laser Acrylic enclosure for the 3.5 Inch LCD Shield.
3.5mm male plug to 3 RCA female adapter cable(Red, White, Yellow) connectors for Audio and/or Video devices
Power adapter compatible with ODROID system board. ODROID is a development platform.
Exact specifications as per Hardkernel. Suitable for all Odroid-XU4 with HDD, Switching adapter with US plug, with FCC. ROHS and CEC compliant
Part for the I2S 2Watt Stereo Boom Bonnet Kit, for use with the ODROID C1+ / C2.
Lithium Polymer rechargeable cell with a protection circuit.
he Biscuit™ is an integrated module consisting of 3 dimensional motion sensor and Wi-Fi communication module.
Additional boards for DIY projects or Arduino Camp? This is a spare part for ODROID-GO kit.
This is a spare board for ODROID-GO Advance Black Edition. This is NOT compatible with the original ODROID-GO Advance.
Fully assembled 3.2inch display with 320x240 pixels TFT LCD and a resistive touch overlay. Just plug it on top of ODROID-C1. 2x13 tall female header is already soldered on the PCB.
You're probably itching to make some fun embedded computer projects with ODROID-C2 or ODROID-C1+.
The CloudShell-2 for the ODROID-XU4 is an affordable DIY Network Attached Storage (NAS) Solution with RAID support.
Compact Stero Speaker for VU7A Plus and VU5A Plus
This is a perfect connector pack for various DIY projects with the ODROID-C0. You need a soldering skill to use this pack.
The fan motor speed is controlled by CPU temperature proportionally
The fan motor speed is controlled by CPU temperature proportionally
By default XU4 board includes the cooling fan, you might need this part when you want to replace original cooling fan.
- Connector : 1.25mm 4-pin wafer male wire
- Blue : PWM input
- Yellow : Tacho output (Frequency Generator)
- Red : DC 5V
- Black : Ground
DC Plug specification : Inner diameter 0.8mm and outer diameter 2.5mm
Center is positive(RED wire) and outer is negative(BLACK wire)
DC Plug specification : Inner diameter 0.8mm and outer diameter 2.5mm
Center is positive(RED wire) and outer is negative(BLACK wire)
Center is positive(RED wire) and outer is negative(BLACK wire)
Center is positive(RED wire) and outer is negative(BLACK wire)
Pre-installed Android version.
Pre-installed Android version.
eMMC Version 5.1 interface or higher version from Samsung.
This is the only way that you can upgrade your OS in the eMMC. It is highly recommended item.
This heatsink might be useful for who needs the full throttled quad-core performance with ODROID-C1.
The HiFi Shield Plus provides both stereo RCA connectors to connect to external amplifiers and other audio equipment. Via TI’s high-end PCM5242 DAC chip(known as Burr-Brown), it supports 16, 24, 32 bit audio formats with minimal THD+N ratio (0.002%) and ideal dynamics (114dB+), plus amazing sampling rates of 384kHz
Works with the ODROID-C2 / C1+. This is not compatible with the original ODROID-C1.
This LCD displays 20 characters wide, 4 rows in white texts on blue background.