List of products by brand CorpShadow

Ideal for electronics projects, phone or tablets. 

Raspberry pi best value power supply which will give you actual 5V after complete boot up. Ideal for general purpose as well, like any device with micro-USB

18AWG is a standard gauge cable, which is suitable for most applications, this cable can carry up to 10 AMPs, 125 Volt load.

Cable is made of 24AWG pure copper listed pair conduits with 50u" gold plated contacts (short body). Most budget cables skimp with 10u". 350 MHz Category 5E Patch Cord (UTP)

These spacers increase the internal height of our Modular Raspberry Pi Case by 10mm per spacer and can be stacked to increase the headroom further. Additional (longer) screws required - please read below notes.

Supports SATA Interface rate of 6Gb/s

Ultra high-performance and low power consumption

Supports dynamic power management and SMART

TRIM Command Supported

Ultra high-performance and low power consumption

Supports dynamic power management and SMART

TRIM Command Supported

This adapter can be used with ALIX.1 boards, which require 12V power. Not recommended for other ALIX boards, which have the 2.1 mm instead of 2.5 mm jack.Compact size AC adapter, saves space on power strips.

Compact size AC adapter, saves space on power strips. Input voltage 100-240 V AC, 47-63 Hz. Output voltage 12 V DC, maximum current 2.0A. High efficiency. 2.5 mm jack, center positive.

Compact size AC adapter, saves space on power strips. Input voltage 100-240 V AC, 47-63 Hz. Output voltage 12 V DC, maximum current 2.0A. High efficiency. 2.5 mm jack, center positive.

Compact size AC adapter, saves space on power strips. Input voltage 100-240 V AC, 47-63 Hz. Output voltage 12 V DC, maximum current 2.0A. High efficiency. 2.5 mm jack, center positive.

Ultra high-performance and low power consumption

Supports dynamic power management and SMART

TRIM Command Supported

Sup Pin Pitch: 2.54mm

Enhanced anti-shock and anti vibration

Static wear-leveling algorithm support

Exact specifications as per PCEngine's recommendations. Suitable for all ALIX boards other than ALIX.1D/1E, Switching adapter with US plug, with  FCC. ROHS and CEC compliant

Exact specifications as per PCEngine's recommendations. Suitable for all ALIX boards other than ALIX.1D/1E, Switching adapter with US plug, with  FCC. ROHS and CEC compliant

Exact specifications as per PCEngine's recommendations. Suitable for all ALIX boards other than ALIX.1D/1E, Switching adapter with US plug, with  FCC. ROHS and CEC compliant.

Solution for PCEngines & MikroTik boards in a 19" 1U rack mount enclosure to install in data center. Ideal for redundant or high performance firewalls, VPN solutions, VOIP solutions and more, great choice to rack mount low power and fanless boards.

This antenna utilizes a printed antenna circuit to achieve true dual band coverage in a very compact form factor.

A great choice for your tool kit, this low cost adapter gives you freedom to access any 2.5" SATA drive

Use this SSD Kit to install 2.5" SSD Drive in FW2700 Network Appliance.

3 "AAA" Battery Holder With 6" Wire Leads ( Red = Positive, Black = Negative) Wire Leads

Cable is made of 24AWG pure copper listed pair conduits with 50u" gold plated contacts (short body). Most budget cables skimp with 10u". 350 MHz Category 5E Patch Cord (UTP)

Supports SATA Interface rate of 6Gb/s

Ultra high-performance and low power consumption

Supports dynamic power management and SMART

TRIM Command Supported

Ultra high-performance and low power consumption

Supports dynamic power management and SMART

TRIM Command Supported

Sup Pin Pitch: 2.54mm

Enhanced anti-shock and anti vibration

Static wear-leveling algorithm support

18AWG is a standard gauge cable, which is suitable for most applications, this cable can carry up to 10 AMPs, 125 Volt load.

Cable is made of 24AWG pure copper listed pair conduits with 50u" gold plated contacts (short body). Most budget cables skimp with 10u". 350 MHz Category 5E Patch Cord (UTP)

Extend the reach of your USB 3.0 devices with CorpShadow's USB 3.0 compliant usb extension cables. Backward compatible with previous versions of USB but speed tested to be able to support the newest standard as well.

Connects HDMI devices to HDMI devices
Resolution up to 1080p
HDMI spec : V1.4
RoHS compliant

18AWG is a standard gauge cable, which is suitable for most applications, this cable can carry up to 10 AMPs, 125 Volt load.

Cable is made of 24AWG pure copper listed pair conduits with 50u" gold plated contacts (short body). Most budget cables skimp with 10u". 350 MHz Category 5E Patch Cord (UTP)

Cable is made of 24AWG pure copper listed pair conduits with 50u" gold plated contacts (short body). Most budget cables skimp with 10u". 350 MHz Category 5E Patch Cord (UTP)

100% full load burn-in test
Pass LPS
Protections: Short circuit / Overload / Over voltage / Over temperature
Class II power (without earth pin)
2 pole USA plug

Supports SATA Interface rate of 6Gb/s

Ultra high-performance and low power consumption

Supports dynamic power management and SMART

TRIM Command Supported

Ultra high-performance and low power consumption

Supports dynamic power management and SMART

TRIM Command Supported

Standard power extension cable for computers or general purpose with high quality and UL Certified.

Sup Pin Pitch: 2.54mm

Enhanced anti-shock and anti vibration

Static wear-leveling algorithm support

Power socket for general purpose or to use with Casedualboard2.

It is card reader and writer, you can fastly transfer your data from your card to your PC, or from your PC to your card. just plug and play! No external power required and NO need to install drivers. Suitable to transfer Images on CF Cards for ALIX /APU boards or others.

Designed for Raspberry Pi 4 Model B, these cases are durable and strong.
Besides, the product offers a high heat conductivity and excellent corrosion resistance, which is able to better protect your Pi board.
The anodizing process performed on the surface of the metal greatly improves the quality of the case visually and tactually.
All ports and slots of the case can match with Raspberry Pi 4 Model B perfectly.

This is an armor aluminum alloy case designed for the Raspberry Pi 4 computer model b. It is a great passive cooling case to help raspberry pi 4 board cooling down.

Note: the raspberry pi 4 board is not inlcuded in the packing list.

A must have case for Khadas Tone Board. Give your tone board protection and secure from damage.

3510 Version Extreme Cooling Fan Kit For Raspberry Pi 4B is a brandnew Cooling system for your Raspberry Pi 4B.
It's a completely new radiator, and it's a very cool cooling system after the armor shell.
The fan is 3510 version and more powerful but still quite when it is running.
Two aluminum blocks will touch the MCU tightly and good for the heat dissipation.
It's with good-looking appearance, and easy to assemble.

• Strong and tough cable
• Better Compression Resistance
• Slim and Flexible
• Anti Rodent