High Speed 4K HDMI 2.0 Cable
- HDMI version 2.0 A Male to A Male Cable
- 4K ultra high definition resolution (3840x2160) provides maximum data throughput to work perfectly with new 4k ultra HD televisions.
- 18 Gbps ultimate high speed provide enough bandwidth for the high quality 4k ultra HD video & audio.
- Cable Length : 1.5 meters
- Board Category
16 other products in the same category:
This is a single LCD module as a spare part that we’ve put into the ODROID-GO kit.
The display has 320×240 pixels and the communication interface is SPI.
The semi-transparent case has openings for all outputs including the GPIO port making it a great fit projects that are connected to external hardware.
Use this USB-DC Power Bridge board with ODROID-XU4 to connect ODROID-VU7 or VU7 Plus
RTC backup battery Lithium primary battery to back up the RTC on XU board. This battery can keep the RTC running up to 5 years without external power supply.
The MC1 was originally designed to be 4 stackable units, each with a specially designed Single Board Computer (SBC) based on the Samsung Exynos 5422 Octa-core processor
Fully assembled 3.2inch display with 320x240 pixels TFT LCD and a resistive touch overlay. Just plug it on top of ODROID-C1. 2x13 tall female header is already soldered on the PCB.
Fully assembled 3.5inch display with 480×320 pixels TFT LCD and a resistive touch overlay.
This “Case Type 7” is designed for the user who needs high bandwidth network with mid-range storages.
5pieces of 10pin male header is excellent choice for your DIY project.
Availability: 33 In Stock
Power adapter compatible with ODROID system board. ODROID is a development platform.
Availability: 12 In Stock
This board contains a USB3.0 to SATA3 controller (JMicron JMS578) allowing interfacing of a single 2.5" SATA HDD/SDD
The LED Matrix Shield is also great for making scrolling displays. In our example codes, we set it up so words flow from one matrix to the other.
Availability: 11 In Stock
DC Plug specification : Inner diameter 0.8mm and outer diameter 2.5mm
Center is positive(RED wire) and outer is negative(BLACK wire)
4 channel IIC I2C Logic Level Converter Bi-Directional Module 5V to 3.3V.
- Connector : 1.25mm 4-pin wafer male wire
- Blue : PWM input
- Yellow : Tacho output (Frequency Generator)
- Red : DC 5V
- Black : Ground
Product added to compare.