RTC backup battery Lithium primary battery to back up the RTC on XU board. This battery can keep the RTC running up to 5 years without external power supply.
- Embedded Systems
- Ready Systems addremove
- IoT addremove
- VoIP addremove
- Wireless addremove
-
Components
add remove
- STEM Education
- Combo Kits
- Services
- Support
- Contact Us
RTC Shield for ODROID-C2
Reference: ODRTCS
Real Time Clock Shield for the ODROID-C2
Just mount this RTC Shield on the GPIO port of the ODROID-C2 to keep the time when your ODROID is offline. A Lithium-coin battery can keep the RTC chip running up to 3~4 years without external power supply.
You can still use ODROID official case using this shield.
Data sheet
- Depth
- 13.5mm
- Weight
- 150g
- Width
- 20mm
- Height
- 20mm
- Board Category
- ODROID-C2
ODROID-C4 - Return Warranty
- No Returns
- Manufacturer Warranty
- No Returns

Real Time Clock Shield for the ODROID-C2
16 other products in the same category:
The fan motor speed is controlled by CPU temperature proportionally
Ultrasonic ranging module HC - SR04 provides 2cm - 400cm non-contact measurement function.
This MIPI camera kit has an OV5647 sensor chip which can capture up to 5 Mpixel images and 720p/30fps video streaming. You can get reasonably good imaging whether it is in the daytime or at night thanks to the automatically switchable IR-Cut filter and two IR Lights. Realtime image inputs from the MIPI-CSI port can be widely used for Machine-Learning applications.
This “Case Type 3” is designed for the user who needs high bandwidth network with mid-range storages.
Discontinued
he Biscuit™ is an integrated module consisting of 3 dimensional motion sensor and Wi-Fi communication module.
A single native (non-USB) SATA 3.0 port on the ODROID-M1 is provided for use with a 2.5inch HDD or SSD NAND Memory storage device. This SATA interface delivers near 500MB/s of sequential access. The SATA mount kit contains a SATA Data cable, a SATA Power cable, and a mount plate with some support screws. However, since the SATA power port doesn’t have a 12Volt power rail, a separated external 12Volt SATA power supply is required to use a 3.5inch HDD.
This LCD displays 20 characters wide, 4 rows in white texts on blue background.
4 channel IIC I2C Logic Level Converter Bi-Directional Module 5V to 3.3V.
Center is positive(RED wire) and outer is negative(BLACK wire)
This “Case Type 2” is designed for the user who needs high performance network with a minimal or regular range storages.
Speaker : 0.5Watt 8Ω Mono speaker
Joystick : Analog Joystick
Note: Input voltage should be no more than rated voltage,or the module will be burnt
The four-lane MIPI-DSI port can be directly connected to an LCD panel. An 8inch 800×1280 wide viewing angle LCD and the capacitive multi-touch screen are pre-assembled.
Fully assembled 3.5inch display with 480×320 pixels TFT LCD and a resistive touch overlay.