Availability: Out of stock
Made with an OLED display and RTC chip, this module can be mounted on ODROID-HC4 and ODROID-HC4-P products.
VUSHELL FOR VU7 - Smokey Blue/White
Reference: ODVU7SHB
US$37.95
VuShell is a laser cut acrylic enclosure for the ODROID-VU7Plus. You can make your own desktop PC with the fancy VuShell. VuShell allows for two different viewing angles.
VuShell is a laser cut acrylic enclosure for the ODROID-VU7 Plus. You can make your own desktop PC with the fancy VuShell. VuShell allows for two different viewing angles.
Download Complete Assembly Instruction from Download section at the end of product page.
Instructions to Assemble with ODROID-XU4
- ODROID-VU7/VU7plus and related accessories are NOT included
Package include
A. Front piece
B. Left side piece
C. Right side piece
D. Bottom1 piece
E. Bottom2 piece
F. Bottom3 piece
G. Cover piece
H. 16 x 5 mm screws (Philips dual round head, metal)
I. 4 x 6 mm screws (Philips pan head, metal)
J. 8 x 8mm female hex PCB spacers (metal)
- You need a small Philips bit screw driver.
- Laser cut acrylic pieces, screws and spacers are included.
- ODROID-VU7/VU7plus and related accessories are NOT included
ODVU7SHB
Data sheet
- Color
- Smoky Blue and Smoky White
- Weight
- 395g approx.
VuShell is a laser cut acrylic enclosure for the ODROID-VU7Plus. You can make your own desktop PC with the fancy VuShell. VuShell allows for two different viewing angles.
16 other products in the same category:
Availability: Out of stock
Additional boards for DIY projects or Arduino Camp? This is a spare part for ODROID-GO kit.
Availability: 1 In Stock
* Amlogic ARM® Cortex®-A5(ARMv7) 1.5Ghz quad core CPUs
* Mali™-450 MP2 GPU (OpenGL ES 2.0/1.1 enabled for Linux and Android)
* 1Gbyte DDR3 SDRAM
* eMMC4.5 HS200 Flash Storage slot / UHS-1 SDR50 MicroSD Card slot
Availability: 2 In Stock
Fully assembled 3.5inch display with 480×320 pixels TFT LCD and a resistive touch overlay.
Availability: Out of stock
Laser Acrylic enclosure for the 3.5 Inch LCD Shield.
Availability: 18 In Stock
DC Plug specification : Inner diameter 0.8mm and outer diameter 2.5mm
Center is positive(RED wire) and outer is negative(BLACK wire)
Availability: 1 In Stock
ODROID-HC4 is new Home-Cloud platform based on the same ARM CPU as the ODROID-C4. We adopted a 12nm fabricated energy efficient 1.8Ghz Cortex-A55 quad core processor with faster 4GB DDR4 RAM.
Availability: 33 In Stock
Power adapter compatible with ODROID system board. ODROID is a development platform.
Availability: 2 In Stock
The low-cost variant of our most popular and powerful ARM SBC ODROID-N2+.
Availability: 4 In Stock
The ODROID-GO Super (OGS) is an upgraded version of the very popular ODROID-GO Advance.
Availability: 1 In Stock
A sleek and cool blue metal case is an available option to protect your ODROID-M1 board.
The metal cover is made with aluminum extrusion that has an abrasive blasted surface texture and anodized blue finish. It can be securely docked to the ODROID-M1 heatsink frame via sliding slot. The front and rear side covers were made with gold plated PCBs.
Availability: 3 In Stock
3.5mm male plug to 3 RCA female adapter cable(Red, White, Yellow) connectors for Audio and/or Video devices
Availability: 4 In Stock
"ODROID-GO Advance Black Edition" is a DIY Game kit just like the older version ODROID-GO.
Availability: 5 In Stock
The semi-transparent case has openings for all outputs including the GPIO port making it a great fit projects that are connected to external hardware.