ODROID

USB3.0 eMMC Module Writer 2
In Stock
eMMC Modules

USB3.0 eMMC Module Writer 2

USB3MW2
US$12.87
Easier and faster way to flash your OS image into the eMMC Module. With this unit, you will not need a separate USB card reader. Just attach your eMMC module directly to your PC/Mac via this writer board. The module writer supports various speeds and capacities of eMMC modules and provides a faster write speed than its predecessor, the USB2.0 eMMC Module...
Weather Board 2
EOL. Limited Quantity
ODROID

Weather Board 2

ODWB2
US$20.35
Best low-cost environmental sensing solution with BME280 and Si1132 on one board. The combination of the BME280 sensor and the Si1132 sensor enables measuring temperature, barometric pressure and humidity, UV Index and ambient light at once. 6pin header socket is already soldered. You can simply plug it on to the right connector. 
ODROID-UPS2 for Odroid C1 ODROID-UPS2 for Odroid C1 2
Limited Quantity
Power Supply

ODROID-UPS2 for Odroid-C1

ODUPSC1
US$49.45
The UPS2 for C1 is designed specifically for the ODROID-C1. Uninterrupted Power Supply is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails. The on-battery runtime of most uninterruptible power sources is relatively short but sufficient to start a standby power source or properly shut...
ODROID-UPS3 for Odroid C1 / C1+ / C2. ODROID-UPS3 for Odroid C1 / C1+ / C2. 2
Out of Stock
Power Supply

UPS3 for Odroid C1 / C1+ / C2.

ODUPS3
US$59.95
Uninterrupted Power Supply is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails. The on-battery runtime of most uninterruptible power sources is relatively short but sufficient to start a standby power source or properly shut down the ODROID.
Step up DC-DC
In Stock
Power Supply

Step up DC-DC

ODSUDC
US$2.25
Note: Input voltage should be no more than rated voltage,or the module will be burnt
M1 SATA mount and cable kit
In Stock
Mounting / Adapters

M1 SATA mount and cable kit

ODM1SMKIT
US$13.70
A single native (non-USB) SATA 3.0 port on the ODROID-M1 is provided for use with a 2.5inch HDD or SSD NAND Memory storage device. This SATA interface delivers near 500MB/s of sequential access. The SATA mount kit contains a SATA Data cable, a SATA Power cable, and a mount plate with some support screws. However, since the SATA power port doesn’t have a...
SmartPower2 with 15V/4A PSU
In Stock
Power Supply

SmartPower2 with 15V/4A PSU

ODSMARTPWR2
US$53.95
SmartPower2 is a power-supply which has WiFi connectivity to control the voltage and switch on/off a connected device.
ODROID-M1 ODROID-M1 2
Out of Stock, Order to Reserve
ODROID Boards

ODROID-M1

ODROID-M14G
US$91.00
The ODROID-M1 is a single board computer with a wide range of useful peripherals developed for use in a variety of embedded system applications. 
Showing 13-20 of 20 item(s)

By using this site, you agree to cookies for a better experience. See Privacy Policy.