ODROID-UPS3 for Odroid C1 / C1+ / C2.
ODROID-UPS3 for Odroid C1 / C1+ / C2.
ODROID-UPS3 for Odroid C1 / C1+ / C2.
ODROID-UPS3 for Odroid C1 / C1+ / C2.
ODROID-UPS3 for Odroid C1 / C1+ / C2.
ODROID-UPS3 for Odroid C1 / C1+ / C2.

UPS3 for Odroid C1 / C1+ / C2.

Out of Stock
US$59.95

Uninterrupted Power Supply is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails. The on-battery runtime of most uninterruptible power sources is relatively short but sufficient to start a standby power source or properly shut down the ODROID.

Description

The UPS3 is designed specifically for the ODROID-C1 / C1+ / C2.

Uninterrupted Power Supply is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails. The on-battery runtime of most uninterruptible power sources is relatively short but sufficient to start a standby power source or properly shut down the ODROID.
It is equipped with a rechargeable 3,000mAh Lithium Polymer battery and a charger with a booster IC for 5V output.

When the AC power source fails, the UPS3 keeps supplying the power to the ODROID-C1/C1+/C2 with the battery. There is a digital output pin to notice the battery low-level warning to the ODROIDs to trigger the shutdown process. And the AC power source available, UPS3 will supply the power to the ODROID board again automatically. It will significantly reduce the risk of data loss by sudden power-down.

It will significantly reduce the risk of data loss by sudden power-down.

Full guide, schematics, PCB layout file and detail information is on Hardkernel's WiKi : http://odroid.com/dokuwiki/doku.php?id=en:odroid-ups3

Software update is required.

.
PACKAGE INCLUDES:

- 5V/2A Power Supply (US Plug)
- 3000mAh battery pack
- UPS Board
- 2 x 11mm PCB spacer (metal)
- 4 x 5mm screw (metal)

Product Details

Battery Life
Carry out 400 cycle charging / discharging @ 20±5℃ (2-4 hours with load 300mA@5V
Charging Time
1hr 30min ~2 hrs
Idle Current
250 ~ 300mA @5V
Output Current
2000mA @ DC 5V
Battery Type
3,000mAh Lithium Polymer
Input Power
DC 4.8V ~ 5.4V / 2A minimum
Integrated
Protection PCB Over charge and discharge protection
Connector
Molex 51021-0200
Compatible with
ODROID-C1 / C1+ / C2
Package Includes
3000mAh battery pack, DC Plug Cable soldered UPS2 board, 3pin jumper wire (11mm), 4 x 20mm PCB spacers (Plastic), 4 x 11mm PCB spacers (Metal),4 x 10mm PCB spacers (Plastic), 5V/2A Power Supply
Board Category
ODROID Power Supply
Return Warranty
No Returns
Manufacturer Warranty
No Returns
ODUPS3

Reviews (0)

No reviews

7 other products in the same category:

Product added to wishlist

By using this site, you agree to cookies for a better experience. See Privacy Policy.