Availability: 10 In Stock
Solid state replacement for 3.5" hard disk drives, 40 pin IDE connector.
PC Engines APU2E4 System Board
Reference: APU2E4
US$230.00
The APU2E4 Platform is the alternate next generation of low-cost APU series (APU1D4) from PCEngines.
*Heat Spreader Kit for APU Board is included
Improved APU2E4 system board with the following changes:
Changed battery socket footprint to avoid contact problems. Add signal integrity resistor for core voltage control signal.
Improved APU2C4 system board with the following changes:
Reduce leakage current between V3 and V3A power rails (can cause problems with SD cards). Add options for better compatibility with LTE modem modules
The APU2E4 Platform is the alternate next generation of low-cost APU series (APU1D4) from PCEngines. It is a high-performance mini-ITX embedded board with AMD GX Series (Quad-Core) CPU 1GHz with 64 bit and 2MB L2 cache featuring 3 Intel I210AT & DDR3-1333 DRAM. The PC Engines APU System Board is a Single Board Computer (SBC) which can be used for a variety of applications like LAN Router, Firewalls, Load Balancer, VPN-Router, Thin Clients, compact Server, NAS etc. Compact, power efficient and can be booted over the network, via USB-Device, SD-Card, mSATA-SSD-Module and SATA-Connection.
Directly ship from Canadian Warehouse!
PCEngines APU2 Series Boards Model Overview.
APU2E4
Data sheet
- Processor (CPU)
- AMD Embedded G series GX-412TC, 1 GHz quad Jaguar core with 64 bit and AES-NI support, 32K data + 32K instruction cache per core, shared 2MB L2 cache.
- DRAM
- 4 GByte DDR3-1333 (not expandable)
- I/O
- DB9 serial port, 2 USB 3.0 external + + 2 USB 2.0 internal, three front panel LEDs, pushbutton
- Board Size
- 6 x 6" (152.4 x 152.4 mm) - same as apu1d, alix2d13 and wrap1e.
- Display Port
- None
- Storage Controller
- mSATA, SD Card
- Enclosure Cutouts
- 3 x Ethernet, 1 x USB, 2 x SMA, 3 x LED, 1 x Reset button
- Ethernet Ports
- 3 Gigabit Ethernet channels (Intel i210AT)
- Package Includes
- System Board APU2D4, Thermal Pads, ALU Heat Spreader
- Firmware
- CoreBoot Open Source System BIOS with support for iPXE and USB boot
- Expansion
- 2 miniPCI express (one with SIM socket), LPC bus, GPIO header, I2C bus, COM2 (3.3V RXD / TXD)
- Power Adapter
- DC Output: 12v 2A with US Plug
- Power
- 12V DC
- Board Category
- APU2
- Return Warranty
- Standard 30 Days
- Manufacturer Warranty
- 2 Years Limited Warranty
The APU2E4 Platform is the alternate next generation of low-cost APU series (APU1D4) from PCEngines.
*Heat Spreader Kit for APU Board is included
16 other products in the same category:
Availability: 18 In Stock
This 16GB mSATA SSD Module (Updated Firmware) is perfect for use with latest APU board. Works well for Windows XP, Windows 7, Linux and MacOS10.X.
Availability: 5 In Stock
Small Footprint with High Power Density
Meets EMS EN50082-2/EN61000-6-2 Heavy Industry Level (35~150 W)
Withstands 300 VAC Surge Input for 5 Seconds
Availability: 7 In Stock
It is card reader and writer, you can fastly transfer your data from your card to your PC, or from your PC to your card. just plug and play! No external power required and NO need to install drivers. Suitable to transfer Images on CF Cards for ALIX /APU boards or others.
Availability: Out of stock
The APU1D Platform is the alternate next generation of low cost Alix series (Alix.2D13 & Alix.6F2) from PC Engines. It is a high performance mini-ITX embedded board with AMD G Series (Dual-Core) CPU 1GHz with 64 bit and 512MB L2 cache featuring 3 Realtek Gigabit Ethernet & DDR3-1066 DRAM
Availability: 61 In Stock
It is a high performance mini-ITX embedded board with AMD GX Series (Quad-Core) CPU 1GHz with 64 bit and 2MB L2 cache featuring 4 Intel i211AT & 4GB DDR3-1333 DRAM.
*Heat Spreader Kit for APU Board is included
Availability: 60 In Stock
PC Engines SATA data with Power cable for APU Boards has three connectors, , data / power on drive end, separate SATA data and 2 pin power header for APU System board end.
Availability: 11 In Stock
This is a 44 pin cable with 2 mm pitch connectors for 2.5" HDDs. Shortened version with opposed connectors for easier mounting inside case1c / case1d enclosures
Availability: 34 In Stock
Please note that these cards support DMA, must disable DMA when used on WRAP.1C / .1D / .2C boards.
Availability: Out of stock
It is a high performance mini-ITX embedded board with AMD GX Series (Quad-Core) CPU 1GHz with 64 bit and 2MB L2 cache featuring 4 Intel i211AT & 2GB DDR3-1333 DRAM.
*Heat Spreader Kit for APU Board is included
Availability: 105 In Stock
This adapter can be used with ALIX.1 boards, which require 12V power. Not recommended for other ALIX boards, which have the 2.1 mm instead of 2.5 mm jack.Compact size AC adapter, saves space on power strips.
Availability: 9 In Stock
ALIX 2D13 is a miniITX form factor system board optimized for thin clients, industrial user, wireless access points, internal and external mesh networks, firewalls and embedded applications. (3 LAN / 1 mini PCI / LX800 / 256 MB / USB / Battery)
Availability: 15 In Stock
Enclosure designed for ALIX.2* boards and APU2C0. Cutouts for 3 LEDs and 1 switch in front, cutouts for DB9, 2 LAN, 3 or 2 SMA connectors, DC jack in back. Enclosure made of anodized or painted aluminum. Dimensions 168 mm wide x 157 mm deep x 30 mm high. RoHS compliant.
Availability: 8 In Stock
Compact size AC adapter, saves space on power strips. Input voltage 100-240 V AC, 47-63 Hz. Output voltage 12 V DC, maximum current 2.0A. High efficiency. 2.5 mm jack, center positive.
Availability: 13 In Stock
Enclosure designed for ALIX.2* boards. Cutouts for 3 LEDs and 1 switch in front, cutouts for DB9, 2 LAN, 3 or 2 SMA connectors, DC jack in back. Enclosure made of anodized or painted aluminum. Dimensions 168 mm wide x 157 mm deep x 30 mm high. RoHS compliant.
Availability: 26 In Stock
Aluminum Enclosure designed for WRAP.2* / ALIX.3* boards. Cutouts for 1 LAN, DC jack, 2 SMA, DB9, 3 LEDs in back.