10mm Spacer for Modular Raspberry Pi Case - Black
These spacers increase the internal height of our Modular Raspberry Pi Case by 10mm per spacer and can be stacked to increase the headroom further. Additional (longer) screws required - please read below notes.
For example, 2 spacers would be 20mm extra. Up to 5 spacers can be used, using longer screws if the case needs to be secured.
The spacers are compatible with both our Raspberry Pi 2/3 Modular case and the new Raspberry Pi 4 version.
10mm Stackable Spacers Features
- Spacers raise the internal height by 10mm enabling the case to grow with your project
- Spacers can be stacked, increasing the internal height by up to 50mm
Screw Size Guide
Depending on the number of spacers required, the length of the screw required will change.
Below is a table showing the use of up to 5 spacers with corresponding screw lengths. We currently stock 3 screw lengths which are linked below.
Screws types compatible with spacers plates are both No.4 (US) and M3 (UK/EU).
16 other products in the same category:
This is a one-fan Raspberry Pi radiator compatible with Raspberry Pi 3B/3B+/4B.
Raspberry Pi® computer you just got has a row of 2x13 pin headers soldered on - those are the GPIO (general purpose input/output) pins and for those of us who like to hack electronics they are where the real fun is. By programming the Pi, you can twiddle those pins high or low, send and receive I2C and SPI data, and access the 3V and 5V power rails.
It is a good plastic box for Raspberry Pi, which can protect it with one of these snazzy plastic enclosures?. These cases protect the Raspberry Pi from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together. It has windows on four sides for direct access to components.
Flirc allows you to pair any remote control with your computer or media center (Including the Raspberry Pi!). Just walk through our super simple cross platform pairing application, and you're done. Use your previously paired remote with no additional software on any machine with Flirc.