Availability: 5 In Stock
4-channel I2C-safe Bi-directional Logic Level Converter
FLIRC Aluminum Raspberry Pi 4 Case
Reference: FLIRCRPIC
US$20.25
The perfect home for your new Raspberry Pi 4. We will ensure our case is adjusted to fit the latest Raspberry Pi specifications.
Note "Only tested for the Raspberry Pi 4B"
Does not support Pi 3B+, 3B, or 2
This case is made of a beautiful aluminium core heat sink that is sandwiched between two black, soft-touch shells that feel amazing in your hands. But once it's out of your hands, it blends in with your entertainment system.
WHATS NEW?
This is the first affordable Raspberry Pi case made out of aluminium. We wanted to ensure we didn’t sacrifice form over function, so we used the aluminium housing of the case to provide a built-in heat sink. Supplied with the case is a thermal pad and 4 screws for the simplest Raspberry Pi case assembly on the market. It only takes seconds to drop your Raspberry Pi into its amazing new home and show it off on your counter top.
THERE'S MORE...They are included rubber feet to raise the enclosure so it just hovers underneath your television. In addition to the built-in heat sink, small ventilation slots on the bottom help keep the Raspberry Pi cool.
Specifications:
Material: Aluminum
USB Ports: 4 x USB Ports Cutouts
HDMI Ports: 2 x Micro HDMI Ports Cutouts
Charging Port: 1 x USB-C Charging Port Cutouts
Audio: 1 x Audio Port Cutouts
Dimensions:
4.00in
1.00in
2.00in
Weight: 0.20lbs
FLIRCRPIC
Data sheet
- Categories
- Cases
The perfect home for your new Raspberry Pi 4. We will ensure our case is adjusted to fit the latest Raspberry Pi specifications.
Note "Only tested for the Raspberry Pi 4B"
Does not support Pi 3B+, 3B, or 2
16 other products in the same category:
Availability: 5 In Stock
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
Availability: 5 In Stock
Separated pin plugs, this cable is ideal for powering and connecting up to the debug/login console on the Raspberry Pi or BeagleBone Black. Connect the pins as shown to power the Pi or BBB and establish the RX/TX link.
Availability: 5 In Stock
This item is for a pack of 4 x 58mm M3 screws suitable for fixing 3 spacers on the Modular Raspberry Pi Case.
Availability: 5 In Stock
The official external antenna for your Compute Module 4. Certified for use with Raspberry Pi Compute Module 4.
Note: CM4 and IO board not included
Availability: 10 In Stock
- 1.2GHz QUAD Core Broadcom BCM2837 64bit ARMv8 processor
- BCM43438 WiFi on board
- Bluetooth Low Energy (BLE) on board
- 1GB RAM
- 4x USB 2 ports
- 40pin extended GPIO
- HDMI and RCA video output
Availability: 5 In Stock
This pi plate is perfect for when you want to build a stand-alone project with its own user interface. The 4 directional buttons plus select button allows basic control without having to attach a bulky computer.
Availability: 5 In Stock
The official Raspberry Pi 4 Model B case, available in a stunning black & grey design. No fixings or tools are required - your Raspberry Pi 4 simply clips into the lower section of the case and the lid pops on too!
Availability: 73 In Stock
It is a good plastic box for Raspberry Pi, which can protect it with one of these snazzy plastic enclosures?. These cases protect the Raspberry Pi from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together.
Availability: 9 In Stock
Availability: 5 In Stock
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
Availability: 5 In Stock
The board itself is tiny, at around 25mm x 20mm x 9mm. It also weighs just over 3g, making it perfect for mobile or other applications where size and weight are important
Availability: 5 In Stock
This pi plate is perfect for when you want to build a stand-alone project with its own user interface. The 4 directional buttons plus select button allows basic control without having to attach a bulky computer.
Availability: 5 In Stock
This metal heatsink case is specially designed for cooling down your Raspberry Pi 4B!
Availability: 5 In Stock
A super handy switch cable for your Raspberry Pi 4 Model B , removing the need to pull the USB-C connector out of your Raspberry Pi (or mess around with sockets/plugs) every time you want to power up/down.
Availability: 5 In Stock
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.