Raspberry Pi

GPIO Header for PI
In Stock
Accessories

GPIO Header for Pi

GPIOHDR
US$2.35
GPIO Header for Raspberry Pi - Extra tall 2x13 Female Header
Tiepoint Breadboard
In Stock
Raspberry Pi

Tiepoint Breadboard

CBB1655
US$10.95
This is a breadboard, good for small projects. It's 5.5 cm x 16.5 cm with a standard double-strip in the middle and two power rails on both sides.
Raspberry Pi Camera Board
In Stock, Shipping Now
Raspberry Pi

Raspberry Pi Camera Board

PICAMBRD
US$32.95
The board itself is tiny, at around 25mm x 20mm x 9mm. It also weighs just over 3g, making it perfect for mobile or other applications where size and weight are important
USB 2.0 Active Extension Cable 5m
In Stock
US$5.95
The USB 2.0 Extension Cable extend the distance between your USB peripheral and your USB hub or computer assure good signal quality to meet USB specification.
USB to TTL Serial Cable USB to TTL Serial Cable 2
In Stock, Shipping Now
Raspberry Pi

USB to TTL Serial Cable

RBUSBTTL
US$10.95
Separated pin plugs, this cable is ideal for powering and connecting up to the debug/login console on the Raspberry Pi or BeagleBone Black. Connect the pins as shown to power the Pi or BBB and establish the RX/TX link.
Micro USB Data/Power cable
In Stock
Computer Cables

Micro USB Data/Power cable

USBMICRO
US$4.25
The connector heads measure 0.51" x 0.36" x 0.25" (13.0 x 9.3 x 6.3 mm) on the USB micro B end and 0.51" x 0.55" x 0.25" (13.0 x 13.8 x 6.3 mm) on the USB A end. 
GPIO Ribbon Cable for Raspberry Pi
In Stock
Computer Cables

GPIO Ribbon Cable for Raspberry Pi

PIGPIO26
US$6.95
Raspberry Pi® computer you just got has a row of 2x13 pin headers soldered on - those are the GPIO (general purpose input/output) pins and for those of us who like to hack electronics they are where the real fun is. By programming the Pi, you can twiddle those pins high or low, send and receive I2C and SPI data, and access the 3V and 5V power rails.
Low-profile microSD card adapter
In Stock, Shipping Now
US$6.95
Make your Pi a little slimmer with this microSD card adapter board. It slides in where the SD card goes but is half the length. Pop in a microSD card for a sleeker machine. The microSD card holder is a push-push type so you can push on the edge that sticks out to remove the card when necessary. 
TFP401 HDMI/DVI Decoder
In Stock
Raspberry Pi SBCs

TFP401 HDMI/DVI Decoder

TFP401
US$27.95
TFP401 HDMI/DVI Decoder to 40-Pin TTL Breakout - With Touch
Flex Cable for Pi Camera - 100mm / 4"
In Stock
Computer Cables

Flex Cable for Pi Camera - 100mm / 4"

FCPI1004
US$4.75
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. 
Showing 13-24 of 27 item(s)
Product added to wishlist
Product added to compare.

By using this site, you agree to cookies for a better experience. See Privacy Policy.