Cable is made of 24AWG pure copper listed pair conduits with 50u" gold plated contacts (short body). Most budget cables skimp with 10u". 350 MHz Category 5E Patch Cord (UTP)
Solid state replacement for 2.5" hard disk drives, 44 pin IDE connector. This version includes mounting hole locations for regular and legacy 2.5" hard drives.
The LattePanda UPS Hat is compatible with the LattePanda 2 Alpha, Delta, and 3 Delta pins and can be installed directly. It uses three 18650 lithium-ion batteries as UPS storage and supports power supply through TypeC PD and 5.5mm DC interfaces. When the external power supply is interrupted, the UPS Hat automatically switches to battery power, ensuring...
The ODROID-Vu8M is a cutting-edge 8-inch high-resolution display developed for ODROID devices. Featuring stunning clarity and vivid colors, it delivers an immersive visual experience for gaming, multimedia, and productivity tasks. With its compact size and versatile connectivity options, the ODROID-Vu8M is an ideal choice for portable projects and...
A single native (non-USB) SATA 3.0 port on the ODROID-M1 is provided for use with a 2.5inch HDD or SSD NAND Memory storage device. This SATA interface delivers near 500MB/s of sequential access. The SATA mount kit contains a SATA Data cable, a SATA Power cable, and a mount plate with some support screws. However, since the SATA power port doesn’t have a...
The HiFi Shield Plus provides both stereo RCA connectors to connect to external amplifiers and other audio equipment. Via TI’s high-end PCM5242 DAC chip(known as Burr-Brown), it supports 16, 24, 32 bit audio formats with minimal THD+N ratio (0.002%) and ideal dynamics (114dB+), plus amazing sampling rates of 384kHz
SmartPower 3 is an intelligent power switch designed for ODROID boards and other SBCs. It provides a safe and efficient way to turn on and off your device, as well as monitor the power usage and temperature in real-time. With its compact size and easy-to-use interface, SmartPower 3 is an essential tool for any ODROID project.
The board itself is tiny, at around 25mm x 20mm x 9mm. It also weighs just over 3g, making it perfect for mobile or other applications where size and weight are important
The UPS2 for C1 is designed specifically for the ODROID-C1. Uninterrupted Power Supply is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails. The on-battery runtime of most uninterruptible power sources is relatively short but sufficient to start a standby power source or properly shut...
Use Spade Wire fork terminal with 19" DualBoard Enclosure System for ALIX/APU Boards (CASEDUALBOARD2) and AC to DC Internal Power Supply 35W (RS-35-12).
IP68 Rated Outdoor Weatherproof field replaceable RJ45 Ethernet connector system. 15CM shielded Cat5e cable.Cat5e RJ45 Plug 8P8C. The system features a shielded RJ45
Ubiquiti UISP Cable Pro Industrial-Grade Shielded Outdoor CAT5e - 305-metres (1000-ft) - Black
The UISP-Cable-Pro is a category 5e cable with a highly insulating, weatherproof jacket that prevents damage from rain, snow and other extreme climatic conditions.
This M.2 to PCIe Adapter – Straight is your solution for seamless expansion, uncompromising reliability, and versatile compatibility. Enhance your system’s capabilities today!
This MIPI camera kit has an OV5647 sensor chip which can capture up to 5 Mpixel images and 720p/30fps video streaming. You can get reasonably good imaging whether it is in the daytime or at night thanks to the automatically switchable IR-Cut filter and two IR Lights. Realtime image inputs from the MIPI-CSI port can be widely used for Machine-Learning...
The 19V/7A Power Supply is a high-performance and reliable power supply designed to meet the power requirements of high-end electronic devices, including ODROID boards. It provides stable power with overvoltage and overcurrent protection, ensuring safe and efficient operation. Its compact and durable design makes it an ideal choice for your power-hungry...
Do you want your Raspberry Pi with a more modern and stylish design? Here comes Argon ONE. An aluminum case for your Raspberry Pi board to give it a more decent look.
USB-C 24W Adapter, with USB-C power delivery. This new adapter is meant for use with Edge SBCs, as well as the new VIM3. Onboard controller negotiates the power supply needed by your SBC using the USB-C cable.
The sleek design of the Case Type 2 complements the modern aesthetic of the ODROID-H2 board. The ODROID-H2 Case Type 4 is ideal for users who require high-bandwidth networking with mid-range storage. Its fanless design allows for the dissipation of heated air from the processor and drives, while two 92mm holes on top provide additional ventilation.
Enclosure designed for ALIX.2* boards and APU2C0. Cutouts for 3 LEDs and 1 switch in front, cutouts for DB9, 2 LAN, 3 or 2 SMA connectors, DC jack in back. Enclosure made of anodized or painted aluminum. Dimensions 168 mm wide x 157 mm deep x 30 mm high. RoHS compliant.
USB-C 30W Adapter, with USB-C power delivery. This new adapter is meant for use with VIM4 SBCs. An onboard controller negotiates the power supply needed by your SBC using the USB-C cable.
Designed to keep your Raspberry Pi 4 Model B cool, our case features 'hex' ventilation paired with a 5V cooling fan (included). Also includes a set of rubber feet!
how much words is this: The ODROID-H2 Case Type 5 is designed for users who require high-bandwidth networking and high-capacity storage for a high-performing computing system. Its durable construction and easy access to all ports ensure optimal connectivity and customization, while the fanless design dissipates heat effectively for reliable operation....
Enclosure designed for ALIX.2* boards. Cutouts for 3 LEDs and 1 switch in front, cutouts for DB9, 2 LAN, 3 or 2 SMA connectors, DC jack in back. Enclosure made of anodized or painted aluminum. Dimensions 168 mm wide x 157 mm deep x 30 mm high. RoHS compliant.
