3510 Version Extreme Cooling Fan Kit For Raspberry Pi 4B is a brandnew Cooling system for your Raspberry Pi 4B.It's a completely new radiator, and it's a very cool cooling system after the armor shell.The fan is 3510 version and more powerful but still quite when it is running.Two aluminum blocks will touch the MCU tightly and good for the heat...
This is an armor aluminum alloy case designed for the Raspberry Pi 4 computer model b. It is a great passive cooling case to help raspberry pi 4 board cooling down.
Note: the raspberry pi 4 board is not inlcuded in the packing list.
Designed for Raspberry Pi 4 Model B, these cases are durable and strong.Besides, the product offers a high heat conductivity and excellent corrosion resistance, which is able to better protect your Pi board.The anodizing process performed on the surface of the metal greatly improves the quality of the case visually and tactually.All ports and slots of the...
Do you want your Raspberry Pi with a more modern and stylish design? Here comes Argon ONE. An aluminum case for your Raspberry Pi board to give it a more decent look.
This robust metal enclosure has been designed specifically for the official Raspberry Pi Compute Module 4 IO board and comes complete with fixings, a cooling fan and a bonus included screwdriver.
The perfect home for your new Raspberry Pi 4. We will ensure our case is adjusted to fit the latest Raspberry Pi specifications.
Note "Only tested for the Raspberry Pi 4B"
Does not support Pi 3B+, 3B, or 2
Dual-core Cortex-A72 up to 1.8GHz
Quad-core Cortex-A53 up to 1.5GHz
ARM Mali-T860MP4 GPU
4K VP9 and 4K 10bits H265/H264 video decoders up to 60fps
4GB DDR4 & 128GB eMMC.
The official Raspberry Pi 4 Model B case, available in a stunning black & grey design. No fixings or tools are required - your Raspberry Pi 4 simply clips into the lower section of the case and the lid pops on too!
Dual-core Cortex-A72 up to 1.8GHz
Quad-core Cortex-A53 up to 1.5GHz
ARM Mali-T860MP4 GPU
4K VP9 and 4K 10bits H265/H264 video decoders up to 60fps
4GB DDR4 & 128GB eMMC.
Thinner fins allow us to squeeze 16 of them into the same space. Compatible with the high-airflow 3705 cooling fan for better cooling with lower noise.
Designed to keep your Raspberry Pi 4 Model B cool, our case features 'hex' ventilation paired with a 5V cooling fan (included). Also includes a set of rubber feet!
High performance:
Dual-core Cortex-A72 up to 1.8GHz
Quad-core Cortex-A53 up to 1.5GHz
ARM Mali-T860MP4 GPU
4K VP9 and 4K 10bits H265/H264 video decoders up to 60fps
4GB DDR4 & 128GB eMMC.
This is our very modular Raspberry Pi 4 injection moulded case - a fully customisable and adaptable modular unit aimed to suit a range of Raspberry Pi applications.
This M.2 to PCIe Adapter – Straight is your solution for seamless expansion, uncompromising reliability, and versatile compatibility. Enhance your system’s capabilities today!
It is a good plastic box for Raspberry Pi, which can protect it with one of these snazzy plastic enclosures?. These cases protect the Raspberry Pi from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together.
If you’re running multiple Raspberry Pis as a cluster, mining rig, server farm or any other project using multiple boards, our expandable Raspberry Pi cluster fan case is a great way to stack, display and cool your setup.
USB-C 24W Adapter, with USB-C power delivery. This new adapter is meant for use with Edge SBCs, as well as the new VIM3. Onboard controller negotiates the power supply needed by your SBC using the USB-C cable.
These spacers increase the internal height of our Modular Raspberry Pi Case by 10mm per spacer and can be stacked to increase the headroom further. Additional (longer) screws required - please read below notes.
The Raspberry Pi Case is designed to be fully customisable by the user, and adaptable to suit a range of requirements. The streamlined look and adaptability make it perfect for many applications.
This module is the 16 way GPIO expander for the I2C interface, and built with the MCP23017.MCP23017 has a high-speed I2C interface which supports the I2C frequency of 100KHz, 400KHz and 1.7MHz. The chip has 3 address pins, which can be set up for 8 different addresses. So 8 modules can be connected through two I2C buses to achieve up to 128 IO extensions.
A single native (non-USB) SATA 3.0 port on the ODROID-M1 is provided for use with a 2.5inch HDD or SSD NAND Memory storage device. This SATA interface delivers near 500MB/s of sequential access. The SATA mount kit contains a SATA Data cable, a SATA Power cable, and a mount plate with some support screws. However, since the SATA power port doesn’t have a...
It is a good plastic box for Raspberry Pi, which can protect it with one of these snazzy plastic enclosures?. These cases protect the Raspberry Pi from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together.
It is a good plastic box for Raspberry Pi, which can protect it with one of these snazzy plastic enclosures?. These cases protect the Raspberry Pi from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together. It has windows on...
Enclosure designed for Raspberry-PI boards in rectangular version and consists of two identical halves that fit togather. It has windows on four sides for direct access to components. Well suited for users who frequently connect and disconnect from the PCB ports. Excellent heat dissipation capabilities. Easy access to the GPIO Headers (auxiliary 26 pins).
External USB HiFi with excellent sound and compatible with Khadas, Raspberry pi and other platforms. three independent high-performance OPAs and four ultra-low phase jitter oscillators were added for the best noise reduction.
