WIFI Module #5BK uses the same chipset (Realtek RTL8821CU) as WIFI Module #5B, so it is 100% compatible. IEEE 802.11ac/a/b/g/n WLAN and Bluetooth combo module with onboard 2.4Ghz and 5.8Ghz Dual band antenna.
- Embedded Systems
- Ready Systems addremove
- IoT addremove
- VoIP addremove
- Wireless addremove
-
Components
add remove
- STEM Education
- Combo Kits
- Services
- Support
- Contact Us
LED Matrix Shield
Reference: ODLEDMS
The LED Matrix Shield is also great for making scrolling displays. In our example codes, we set it up so words flow from one matrix to the other.
Works with ODROID-C1 / C1+ / XU4
What's better than a single LED? Lots of LEDs!
With the 16x8 LED Matrix Shield we've doubled your project's matrix capacity by making it super easy to get two separate 8x8 matrices onto one handy board! Matrices like these are 'multiplexed' - so to control 64 LEDs you need 16 pins and to control 128 LEDs, you'd need 24 pins probably.
Thanks to the MAX7219 driver chips that can control multiple matrices for you with only three control signals Data, Clock and Chip-Enable.
The LED Matrix Shield is also great for making scrolling displays. In our example codes, we set it up so words flow from one matrix to the other.
All the components are pre-assembled. Just plug and play.
Spec:
Driver IC : MAX7219 (2pcs on a PCB)
Matrix type : 2set of 8 x 8 common cathode LED (Red color)
Dimension : 64.3 x 35.0 x 26.5 mm
Refer our WiKi documents and example codes
For C1
http://odroid.com/dokuwiki/doku.php?id=en:c1_dotmatrix
For XU4
http://odroid.com/dokuwiki/doku.php?id=en:spi_dot_matrix

The LED Matrix Shield is also great for making scrolling displays. In our example codes, we set it up so words flow from one matrix to the other.
16 other products in the same category:
ODROID-HC4 is new Home-Cloud platform based on the same ARM CPU as the ODROID-C4. We adopted a 12nm fabricated energy efficient 1.8Ghz Cortex-A55 quad core processor with faster 4GB DDR4 RAM.
Compact Stero Speaker for VU7A Plus and VU5A Plus
The CloudShell-2 for the ODROID-XU4 is an affordable DIY Network Attached Storage (NAS) Solution with RAID support.
5pieces of 10pin male header is excellent choice for your DIY project.
The UPS2 for C1 is designed specifically for the ODROID-C1.
Uninterrupted Power Supply is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails. The on-battery runtime of most uninterruptible power sources is relatively short but sufficient to start a standby power source or properly shut down the ODROID-C1
This “Case Type 7” is designed for the user who needs high bandwidth network with mid-range storages.
By default XU4 board includes the cooling fan, you might need this part when you want to replace original cooling fan.
Recommanded for those who wants to protect the ODROID-N2 board from dust and the elements.
Highly recommended item to protect a ODROID-HC2.
This “Case Type 6” is designed for the user who needs high performance network with a minimal or regular range storages.
Discontinued
Part for the I2S 2Watt Stereo Boom Bonnet Kit, for use with the ODROID-XU4 / XU4Q.
VuShell is a laser cut acrylic enclosure for the ODROID-VU7Plus. You can make your own desktop PC with the fancy VuShell. VuShell allows for two different viewing angles.
Center is positive(RED wire) and outer is negative(BLACK wire)
Uninterrupted Power Supply is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails. The on-battery runtime of most uninterruptible power sources is relatively short but sufficient to start a standby power source or properly shut down the ODROID.