Red Indoor Enclosure for APU/ALIX - 3 LAN
PCEngines Indoor Red Enclosure is designed for Following boards.
ALIX2D13, APU1, APU2 and APU3 models.
Tools needed: Phillips screwdriver, 5 mm or 3/16" nut driver ( HEXBIT). Remove hex nuts from DB9 connector of ALIX board. Mount ALIX board in an enclosure, then fasten all screws and hex nuts.
APU1, APU2, APU3 Boards
1 x DC Power Jack, 1 x DB9 Serial, 3 x Ethernet, 2 x USB and 2x SMA antenna Connector
3 LEDs and 1 Reset
Anodized or painted aluminum
1 x Enclosure top, 1 x Enclosure base, 4 x screws to mount system board, 4 x Screws to close enclosure, 4 x Self-Adhesive Feet, 2 x Rubber Plugs for unused SMA holes
APU3 Return Warranty
Standard 30 Days
16 other products in the same category:
30 In Stock
A performance class SD memory card designed to meet the storage demands of high-quality electronic devices.
USB specification revision 2.0 & 1.1 compliant Support RS232 serial interface (DB9 pins) Support over 1Mbps data transfer rate Support remote wake-up and power management Support Windows98/SE/ME/2000/XP/Vista/Windows 7 (32/64bit) and Mac OS9.0/OSX/Linux Suitable for PDA and Modem Driver CD included
APU3B4 System board is same family of PCEngines APU boards, focused on this board is 3G/LTE applications where failover between two networks capability is required or mission critical.
15 In Stock
This 16GB mSATA SSD Module (Updated Firmware) is perfect for use with latest APU board. Works well for Windows XP, Windows 7, Linux and MacOS10.X.
Use this SSD Kit to install 2.5" SSD Drive in FW2700 Network Appliance.
104 In Stock
Compact size AC adapter, saves space on power strips. Input voltage 100-240 V AC, 47-63 Hz. Output voltage 12 V DC, maximum current 2.0A. High efficiency. 2.5 mm jack, center positive.
20 In Stock
Good thermal conductivity performance to join CPU/GPU and heat sink together. CPU's heat can be passed to the heat sink faster and also Enhances the cooling effect of heat sink.
As high-quality and modular enclosure system the Embedded BOX offers compatibility for PCEngines APU1/2/3/4 boards.
Out of stock
The APU2E4 Platform is the alternate next generation of low-cost APU series (APU1D4) from PCEngines. Next batch Expected June 2021
Out of stock
APU3B2 System board is same family of PCEngines APU boards, focused on this board is 3G/LTE applications where failover between two networks capability is required or mission critical.
105 In Stock
This adapter can be used with ALIX.1 boards, which require 12V power. Not recommended for other ALIX boards, which have the 2.1 mm instead of 2.5 mm jack.Compact size AC adapter, saves space on power strips.
81 In Stock
PCEngines Indoor Black Enclosure designed for ALIX2D13 and APU1, APU2 and APU3 Series boards.
117 In Stock
The heat spreader kit is included with apu boards, no need to order separately unless you have to migrate a board to a new enclosure.
Supports SATA Interface rate of 6Gb/s
Ultra high-performance and low power consumption
Supports dynamic power management and SMART
TRIM Command Supported
11 In Stock
HDD Mounting Kit for PCEnginesEmbedded Box ( CASE3D3BLKU)
Product added to compare.